Build Your Own "Leveling Drag" - Out of Metal!
Vložit
- čas přidán 25. 08. 2024
- In this diy video I will show you how to build a heavy-duty dirt and gravel leveling drag out of metal and show you how it works. This will work great for leveling a yard,driveway, and much more
This is exactly what i need and have the materials for!
Great video! Very cool!
Nice - But the addition of a double hinged float exactly the same size as the front. Makes it effective on very rough grading.
I sure wish you could try it out on a grassed area where you need to fill in low spots. I’m wondering if it’s wide enough. Also I note you have angle iron turned down. I saw another one here on CZcams almost identical except they turned the angle up so the flat surface was on the bottom. They were using it on a dirt surface. What are your thoughts on the grass sod application?
Imo turning the angle iron with the flat side down would help eliminate the choppiness that is causing the small ripples left behind in the video. Alternatively setting some or all of the bars at alternating slight angles would also help.
How does this work for clearing brush?
Hmm why engage the mower deck in the rocks though 😂 nice work though 👊
Haha the mower decks all bent and worn out so it's always partially engaged and I've never got around to rebuilding it lol
The angle iron is 3/16" thick in 4' and 6' lengths but what is the length you used on the angle itself? 1 1/2", 2", 3" ?
3 inch is what I used and I bet 2 inch would work also but would be lighter
Are they all 3the same depth?I see some where they make the front and back a bit lower than the middle
yes, they are all the same depth. I've never tried it another way because this has worked great for me. If you do, try it another way please comment back and let me know how it works out for you.
@@hinshawshowto will do and thanks for the reply