Hi I’m having trouble with my oil pump. I can’t seem to get oil to come up through the pipe if I pull pipe from the pump tiny bit comes out but not enough to come up the pipe to the carb. Any ideas thanks
Brother, Can you please make a video on how to set optimum stroke? I don't know how to set the stroke to vary the oil level. Also, I don't know what the adjust screw on the oil pump cable does.
Hi, There are no adjusting screw. on the oil pump. You need to loose the nut located on front end and add or remove the sim washers between shaft and large plate. In case of Yamaha little twin, you also need remove the oil pump unit from the engine for get the enough room.
How much oil does it supply in minimum stroke
Hi I’m having trouble with my oil pump. I can’t seem to get oil to come up through the pipe if I pull pipe from the pump tiny bit comes out but not enough to come up the pipe to the carb. Any ideas thanks
Motocicleta marca Bsá
Brother, Can you please make a video on how to set optimum stroke? I don't know how to set the stroke to vary the oil level. Also, I don't know what the adjust screw on the oil pump cable does.
Hi,
There are no adjusting screw. on the oil pump.
You need to loose the nut located on front end and add or remove the sim washers between shaft and large plate.
In case of Yamaha little twin, you also need remove the oil pump unit from the engine for get the enough room.
Thank you so much! Mine doesn't stroke when the throttle is completely closed in. Not sure if it is an issue.
SET THE GUIDE PIN TO THE DOT ON TOP PLATE OR POSITION TO START OF THE RAMP AT THE PULL OF THE THROTTLE