Flysky INR4 GYB NB4 and Noble Pro SVC receiver set up guide
Vložit
- čas přidán 20. 05. 2024
- Welcome back to Wtf Rc Cars,
Flysky INR4 GYB NB4 and Noble Pro SVC receiver set up guide
For RCModelz link use discount code rcmz for 5% off most of the link prices.
Servos
THETA RAZOR T1 NFC £105.63
www.banggood.com/custlink/DG3...
Ludicrous L8849 brushless servo £85
www.passionrc.co.uk/online-st...
Power HD TR-4 Mini 7.4V 2.6KG Waterproof Metal Gear Servo for TRX4 £18.19
www.banggood.com/custlink/3m3...
AGF A80BHMW 40KG Waterproof Metal Gear Brushless Digital Servo £69.77
www.banggood.com/custlink/KDv...
Flysky Radios and receivers
FlySky FS-G7P 2.4GHz 7CH ANT Protocol Radio Transmitter PWM/PPM/i-BUS/S.BUS Output with FS-R7P £56.37
www.banggood.com/custlink/mD3...
FlySky FS-FRA01 2.4GHz Fishbone Antenna 8dBi £20.83
www.banggood.com/custlink/G3v...
UK FlySky FRA01 Fishbone Antenna 2.4g 8dbi Directional Antenna £19.99
www.rcmodelz.co.uk/electrics/...
Flysky NB4 2.4G 4CH Noble Radio Transmitter w/ HVGA 3.5" TFT Color Screen £146.77
www.banggood.com/custlink/KGD...
UK Flysky NOBLE NB4 2.4ghz Transmitter & Receivers £179.99
www.rcmodelz.co.uk/electrics/...
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.com/custlink/mDG...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.co.uk/electrics/...
FRM302 range extender £81.80
www.banggood.com/custlink/DDm...
Flysky FGR4 receiver £29.09
www.banggood.com/custlink/DK3...
Flysky GMR micro receiver £27.93
www.banggood.com/custlink/vDm...
Flysky FGR4P £29.26
www.amazon.co.uk/dp/B08LGR28Y...
Flysky FGR4B receiver £26.54
www.banggood.com/custlink/mmD...
UK FlySky FGr4B 2.4GHz 4CH AFHDS 3 Micro Mini RC Receiver £32.49
www.rcmodelz.co.uk/electrics/...
FlySky FGr8B £38.04
www.banggood.com/custlink/v3D...
UK FlySky FGr8B £34.49
www.rcmodelz.co.uk/electrics/...
FlySky FGr12B £40.33
www.banggood.com/custlink/Gvv...
UK FlySky FGr12B £38.99
www.rcmodelz.co.uk/electrics/...
Flysky FS-RM005 NB4/Noble Pro FHSS 2.4G Module Compatible Kyosho MINI-Z £38.45
www.banggood.com/custlink/Dmm...
UK Kyosho/FlySky NB4 FS-RM005 Module £36.99
www.rcmodelz.co.uk/electrics/...
ESC and Motors,
Hobbywing EzRun MAX10-SCT 120A Waterproof Brushless ESC +3660 SL G2 Motor for 1/10 Rc Car Truck - 4000KV £135.47
www.banggood.com/custlink/DKG...
TT2302 - Tekin Racing RX8 Gen3 - sensored or sensorless 1/8th or SC ESC - No limit £190.00
www.rccarshop.co.uk/tt2302-rx...
TT1452 - Tekin Racing Hotwire 3.0 - Bluetooth ESC programmer £49.99
www.rccarshop.co.uk/tt1452-ho...
RC cars
Wltoys 144001 1/14 2.4G 4WD High Speed Racing RC Car Vehicle + 3 batteries £84.64
www.banggood.com/custlink/3D3...
Gyros
AGFRC GY01 Aluminium Case High Stability Drift Tuned Gyro £31.05
www.banggood.com/custlink/mD3... - Věda a technologie
Thank you indeed for this short and very helpful introduction! I am new to FlySky equipment and it helps me a lot!
Glad ya like it :)
Just what I needed🙂Thank you so much for this review 😀
Great video thanks. I’ve got one of these and was going to put it in my drift car but went Yokomo V4. These would be great for on road and off road racing.
Thank you Sir!! You are the Noble Master for me and many many other people! Thank you very very much for all of your great videos!
Glad ya like em :)
First, I know, I'm "a little behind"...but, better late than never, right? Second...and (much) more importantly...a HUGE "thank you"...not only for this NB4-related video, but for ALL the NB4 videos you've done (and, hopefully, will continue doing).
Not only have you done more for the NB4 (for years) then any other CZcamsr...but, you've done more for it then even FlySky has. In essence, you've created a "video manual" that's FAR more 'complete' than anything (printed, or video) FlySky could have EVER done - your videos are the quintessential 'go-to' for NB4 users arrive the world. I'm 1,000% certain that they're are countless others who will completely agree with me on what I'm about to say..........
Without your videos, I'd be "completely lost" on the NB4.
When I purchased the NB4, I got it to 'compliment' my Futaba 7PX (hahaha & land race vehicles on 7PX, boats & crawlers on NB4)...but, as time goes on, and FlySky releases more "advanced" receivers, I find myself coming up with more & more excuses (oops...I means 'reasons') to use the NB4. Not saying I'll get rid of the 7PX...but, just as my Hitec X2 AC Black became my backup/secondary charger after I purchased the iCharger 406 Duo, I could (potentially) see the 7PX becoming my 'secondary' Tx.
Please, keep up the outstanding job...and I (plus countless others) will look forward to future 'chapters' in our "NB4 Video Users Manual". 👍🏼👍🏼 🤙🏼
Thanks 👍 glad you like the vids an yeh I will be doing more :)
Craig… you the man!!! Thanks for doing this. mine showed up today. I will watch this 4 or 5 times. And it’s going into my Sketer. 🤞🏻 thanks so much for doing this.
It's a fantastic receiver you will be happy with it :)
Thanks for sharing. I bought my Noble Pro after looking through your great videos! Now I have to get a couple of these recivers✌🏼
You will be amazed at what's coming for the noble pro ;)
@@WTFRCCars That sounds interesting 👍🏻
This was definitely needed that was the only reason I haven't used my NB4 for speed runs
I know you said the set up is the same but would you please do the setup on the NB4 as there are some feature differences between the NB4 & the Pro?
Yeh definitely as there are a good few things that the pro can do that the nb4 can't now
Just bought the receiver on Ali Express for $42.00 I hope I can get it to work with my nb4 and thanks for the video
Works fine with the nb4 :)
I've been waiting for this RX as It really completes the overall Noble package. Great video and your explanation of the "Priority" setting really helped.
I'm also glad flysky made the RX full featured from day one and like you, I think the small form factor is ideal. I don't know of any other surface gyro receiver that's as feature packed as this one, they really thought it out. The "Priority" setting alone is such a great option as it can give you more of a hands off approach to stabilization yet still give you enough to keep those 2wd vehicles from spinning out.
One thing I'd like to know is whether or not you can run that RX in "2 way, 2 channel" mode for improved latency or does the gyro processing reduce the response compared to the same setting on another RX like the FGr4S.
I'll have a look for ya on the 2 way 2ch set up :)
and I just bought the agf gyro. just installed it yesterday
The AGFRC ones are really good gyros very fast and easy to set up too
WOW, Thank you for your videos! They gave me the confidence I could set this up, so I just bought one! Any Chance you could run through this set up on the NB4? I get hung up at the assigning the SVC spot in the video. I understand this function in not available for the NB4 right now, but how do I continue on with the programing after this point?
You just set it up in the menu the only difference is that you can't assign the functions everything else is the same :)
Nice video! I bought an NB4 and wondering which sensor to get for speed, temp and battery voltage. Thanks
There at the bottom of the page when you scroll right :)
www.flysky-cn.com/nb4-peishi
Thanks for your video! I Love your channel.
Are there more Noble Pro Firmware updates ? I only see the 1.01 US Version for my Noble Pro but for my Noble I can update the 2.0.100 firmware version. :P
Nope no new updates yet for the pro.
So… I got it working out the car. Just a heads up, but maybe I’m missing something, but I’m not able to program in the controls assign menu short cuts for gain or on and off. I’m happy I can do it through the SVC icon on the radio.
Yeh that's where your supposed to do it.
In the video he assigns the svc controls to the transmitter variable pots, so you don't have to go to the menu and click and scroll, you just adjust the transmitter controls
BRAVO! I keep coming back to your videos, your an asset, keep those videos coming. Question why don't you post some racing videos?
Just did one :)
czcams.com/video/LPWpXBuU5KU/video.html
finally got myself 2....
Craig. How are you?. I was trying to setup the gyro SVC function but my noble nb4 does not have the option svc to assign.
Just use the SVC menu on the nb4
@WTF RC Cars Do you know where these can be found now? I don't see them on US Amazon or anywhere. I'm in the US. Thanks for all your info on Noble in your videos.
I think they are sold in it everywhere
hobbymatehobby.com/products/flysky-rc-noble-nb4-gyro-receiver-4-channels-inr4-gyb-for-flysky-nb4-noble-lite-noble-pro-radio-transmitter-afhds-3
Guy, I'm looking to replace my acoms technisport handset set which I use in my Tamiya falcon 😊 would this be good upgrade because I would still like to run the old girl 🤔
Both the nb4 and pro would be a huge upgrade from the old acoms :)
Hello. I was wondering for those drag racers if you use this and set the ESP on lock would it be a useful receiver for them the keep the vehicle straight going down the track?
Yeh it would definitely be an advantage for drag RC but it's also against the rules for most drag racing
@@WTFRCCars oh i didn't know about that as a rule, but could see it as a full driving experience to control the whole car.
I came from slotcars where it's about cutting the .000 light and was thinking of making a 1/24 scale type rc drag car and portable track.(Christmas tree and timer lights. Don't think many could keep a 1/24-1/32 scale 110mph+++ car straight in 55 feet with out help and keep it in a 4 inch lane.
If I knew FlySky would release this, I wouldn’t have spent money for another FGr4S…
I might still look into one though. Been hoping for a gyro receiver since getting my NB4 a few months ago.
Receiver aways come in handy for when you get another RC ;)
What do you think the range of this receiver would be like? Similar to the standard FGR4?
Yeh much the same as fgr4 or fgr4p or fgr4b as it has external antenna
hello brother, can't find the svc steering gain in the assign menu, im ruining the regular nb4
The nb4 can't assign functions only the pro can
Would the LOCKED setting be something more suitiable for speed runs?
Really depends and I'd always say try it at a slower speed to see how it reacts and then choose the setting that suits your driving :) the basics are normal it behaves like a standard gyro, locked it will try to lock the direction your wheel is pointing
I have the nb4 with latest update, but in the "assign" section "svc" does not show at all.... does those "svc" options under Assign only show on the Pro and not the NB4?
Yes only the pro can assign the option's
@@WTFRCCars thanks for the reply... so any other way to adjust the gyro at all or not with the nb4?
Yeh you can adjust it in the nb4 menus just not able to assign them to buttons like the pro can :) you still have full control of the settings though :)
Hallo, ich bräuchte Hilfe. Ich habe die normale nb4 aber finde im menue für die Schalter nicht das steering gain. Das fehlt😢
Have you updated the firmware to the latest ?
@@WTFRCCars oh nein... Nur die von dem Empfänger
Any chance of doing one on the nb4 as when selecting tr3 click function there's no svc in the list
The nb4 can't assign SVC functions unfortunately only the noble pro has this option.
Can You also daisy chain all Your sensors straight into the Rx? Is there any form of telemetry logging so You can view it after a run? Im not coming away from traxxas or arrma or losi(spektrum). Im running away as fast as I can. My NB4 is on its way.
I've just got done with a vid on the sensors will be live this week some time :), yes you can daisy chain the sensors all into one port but no there is no logging but it does have alarms for each sensor high and low so you get a warning when ever any sensor goes out of the monitoring range you set :)
@@WTFRCCars Great stuff thank You so much. Your channel is the reason I made up my mind to go with the FlySky Noble and not a super expensive Futaba.
Yeh they are really good and thanks :)
I’m not getting Svc as options for gyro channel control ? Any solution?
SVC will be there unless you have it hidden in the menu options
Great videos. Question. The INR4 GYB is 4 channel only, so what is an IBUS receiver for and will that allow me to have more channels for telemetry and led lights. I would like SVC and GYO functions.
There is another voltage sensor that is a black and white wire that comes with the receivers. What is that for and do I also need to purchase CVT01? thanks in advance
The bvd black and white wire is for external voltage monitoring and has its own port so you don't lose a Ch, you could turn one of the channels into ibus and run the 4ch ibus add-on to get 7ch so no you don't need the cvt01 for voltage with them :)
@@WTFRCCars excellent. thanks a lot.
forgot to ask which 4ch ibus add-on would be suitable to work with the INR4 GYB
It's the cev-04
www.flysky-cn.com/cev04-canshu
I have the NB4 (not Pro) and am unable to assign dials to the SVC function as shown with the NB4 Pro in this video. Wondering if you ever tried this? I am running 2.0.100 FCC on my tx.
Yeh the nb4 can't do it yet need new firmware
@@WTFRCCars thanks for the quick reply. I will keep an eye out for the FW update.
I have updated transmitter and now trying to bind and it wont. Put the transmitter in binding mode, held the bind button and binding plug in and power on - nothing. what am i missing or is something at fault. please advise. -subscribed Thank you!
You need to update the receiver too :)
@@WTFRCCars Thank you for quick reply. after updating the transmitter the flysky assistant does not see the receiver so I can update it. Is there any other way to update the receiver?
Thank you
Yeh just look through my playlists I have them all
@@WTFRCCars Just followed it to the letter and it has been binded - Thank you! Any idea why after a few turns of the wheel on the transmitter to the left it says signal lost. I turn the wheel left and when it returns to neutral the receiver led goes off. This does not happen when turning the wheel to the right.
Low power to the esc and the left endpoint is not set correctly so the servo is drawing too much current
Where can I get these please bud I noticed you haven't left a link for them in description, are they out yet great upload 👍 I need one of these in my life thanks for sharing
Not in UK yet but hobbymate has them on USA Amazon
@@WTFRCCars thanks buddy will be ordering 1 for sure
It's definitely a fully featured stability control receiver :)
Hey
I'm following your steps but with NB4 (Not the Pro) I'm trying to assign the SVC but I cant find it for any buttons , any idea ? I have in the 2nd page SVC menu (calibration and more)
The nb4 can't do the assessment part only the pro can.
@@WTFRCCars Oh, i searched the same. So it can do all the same, but i have to go in the menue at change it manually there? thanks sir
Yep until there is a firmware update ;)
would like to assign svc steering gain to button TR3, but I can not find "svc steering gain" in the menu.
What is it called on the NB4?
NBR can't assign SVC settings in the current firmware.
Okay, thanks for the reply and a very good channel.
Greg do i need to updated my nb4 again to use this gyro receiver?
You need to be on 2.0.100 firmware on nb4
@@WTFRCCars i am still on 2.093 and i have SVC on my NB4? or what would be the benefits? i dont want to update all my cars....
Always update to the latest firmware or you will have strange issues like the RC working then after a few min it gets slower and then stops until you power off and back on :)
Hi I just wanted to ask how do you set it up for the regular nb4 I have tried and can't get it to work
It has to be on 2.0.100 firmware but you can't assign the controls to button or dials you have to set it up in the SVC menu only
@@WTFRCCars so which one is the one I need I'm a little bit lost
@@WTFRCCars it's a new update v3.0.4
@@WTFRCCars because I did the 2.0.100
So the nb4 needs to be on 2.0.100, assistant v3 is version 3.0.4 the receiver will bind to the nb4 on version 2.0.100 but you can't assign controls of the SVC functions to any buttons or dials the noble pro is the only transmitter that can do that the nb4 can't on any firmware.
My only issue is that I'm not seeing the SVC settings as options for button assignment on the NB4. I have the latest FCC firmware, so I'm wondering if only the NB4 Pro has this assignment option. Perhaps there's a firmware update due out for the NB4.
What firmware do you have on the nb4 2.0.100 is the current one
@@WTFRCCars Yep, that's mine. No ability to assign any SVC functions to button on the radio. This firmware precedes the release of the receiver. I suspect the next update will address this.
Yeh it's likely :)
I'm having the same issue, there are no svc assignments available. And running current firmware. I didn't know if that option was only for the noble pro. But I'm waiting to find a solution. Hopefully someone can help
Yeh it's only the pro at the min that can assign to adjust on the fly, hopefully a new firmware will allow this on the nb4 and NBR lite :)
Will the regular NB4 work with this new INR4 receiver? As i'm looking through the NB4 settings and don't see any gyro related items.
Yep works fine you have to have 2.0.93 or newer firmware installed though on the nb4 :)
I'm running one and it works fine w/ my NB4. You have to go the SVC menu to access the settings once paried. But atm, can't assign any SVC functions to any buttons. I hope that will get fixed in the next firmware update.
Yeh I'm guessing a firmware update will be released.
@@WTFRCCars got mine on the way, is heading lock more like a drift setting?
It's more like it tries to keep the RC in the direction of the wheels not the direction it was going in :)
Can this switch setup be done on the NB4 or does it only work on the pro?
Only the pro can assign the menu options to the buttons on current firmware
@@WTFRCCars thanks for the reply, do you know if flysky will do an update for the NB4 that will enable the switch use for the menu or will I have to upgrade to the PRO 😂
They haven't told me of anything planned for the nb4 so far
@@WTFRCCars thanks for the help, one last thing, can the INR4 GYB be updated from the NB4 ?
Ya don't need to and ya can always update it from pc if needed
Ciao amico mio quale versione mi consigli di acquistare ormai che uno fa l’acquisto? Versione pro o base? Ciao e saluti dall’Italia
Dipende molto, se hai bisogno delle etichette dei canali, 18ch e 3 stadi dell'acceleratore, allora deve essere il professionista, ma l'nb4 è comunque un trasmettitore fantastico se non hai bisogno delle funzionalità extra :)
@@WTFRCCars nello specifico quali sono le differenze? Io lo userei per rc rally 1/10, formula e tamiya e vrc pro e magari in futuro per uno scaler. Grazie amico mio per il supporto
Le differenze principali sono che il professionista può avere etichette di canale in modo da poter avere luce accesa/spenta, differenziale bloccato/diff aperto sullo schermo non solo la posizione del servo, anche 18 canali non 8 canali, la ricarica wireless viene fornita con custodia per il trasporto e dimensioni diverse ruote, trigger di diverse dimensioni, modalità a latenza ultra bassa a 2 canali.
how do i get one of these receiver ~ there not available anywhere?
They where on Amazon and AliExpress but think there sold out at the min :(
Does all of that the same for NB4 version not the Pro?
Nb4 can't assign any of the settings to any buttons but all works the same :)
@@WTFRCCars Can you please make us a video in NB4 and SVC - I like your videos and thanks for all what we learn from you
It just works the same as any other receiver but with SVC option but if I get time I'll make one for you :)
what is I-bus protocol
It's what you need to connect i-bus device like I bus servos or a 4 ch add on to one port
I still can't get the SVC to work on the NB4.😢😢😢
What can't you get to work and what firmware do you have on the nb4
In SVC Mode ~ if i turn Priority to 100% dose that mean I have 100% Priority or the gyro has 100% Priority??
0 wiil prioritise keeping the vehicle from loosing grip so bigger turning circle, 100 will prioritise what you are doing so tighter turning radius but less stable :)
@@WTFRCCars I Do Speed Runs So Im Just Trying To Go Perfectly Straight ~ So 0% Would Be Best For My Situation??
Yeh your going to need a really fast servo so the gyro can keep the RC straight on speed runs though something like the theta 1000hz servos
@@WTFRCCars do you have a email or facebook page?
Yeh I have the Facebook group wtfrccars :) it's the QR code on most of my newer vids :)
My NB4 doesn’t have the SVC option on any switch
Only the noble pro does on the current firmware, the nb4 can only have the settings in the menu.
Is this actually available? I can't find it anywhere.
I know a few guys got them from Amazon
@@WTFRCCars Straight up can't find that model anywhere. It's not even listed on the Flysky website.
www.ebay.co.uk/itm/394192685155?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=izhgzng2que&sssrc=2349624&ssuid=-9Xy4QzCS96&var=&widget_ver=artemis&media=COPY but over priced
hobbymatehobby.com/products/flysky-rc-noble-nb4-gyro-receiver-4-channels-inr4-gyb-for-flysky-nb4-noble-lite-noble-pro-radio-transmitter-afhds-3?_pos=2&_sid=e9b14fb8f&_ss=r this is the correct price
@@WTFRCCars So, I finally got one of these receivers to use with my NB4, binds up all good. However, I don't get any of the SVC options in the assignment menu. Any ideas?
Hello, where can I buy it? Even on the off site there is nothing about him.🤔
I've seen it available on USA Amazon
@@WTFRCCars Strange, this receiver is not listed on the off site ...
I don't think it's officially released yet