Flysky FXS260 Ibus 2 servo NB4 setup guide.
Vložit
- čas přidán 15. 07. 2023
- Welcome back to Wtf Rc Cars
Flysky FXS260 Ibus 2 servo NB4 setup guide.
FRM303 Basic version £77.48
FRM303 full version £118.30
s.click.aliexpress.com/e/_DC9...
FTR10 ￡28.52
s.click.aliexpress.com/e/_DBE...
Flysky FTR12B 2.4GHz 12CH Receiver Dual Antennas ￡35.76
s.click.aliexpress.com/e/_DlJ...
Flysky FGR4 ￡26.17
s.click.aliexpress.com/e/_DCS...
FLYSKY NB4 PRO Noble 2.4G 18CH AFHDS 3 Radio Transmitter with FGR4B FGr8B Receiver
s.click.aliexpress.com/e/_DlH...
rdmodels.co.uk/products/flysk...
rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777
info@rdmodels.co.uk
Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 - 4.00
CNHL batteries link
chinahobbyline.com/?ref=Cnhlw...
US PRO Tools 4 Piece Japanese Industry Standard Screwdriver Set JIS ph1,2,3-1616 £10.35
amzn.to/3XI979Q - Věda a technologie
Hi Guys, does anyone know how to set up SSR mode on the NB4?
Depends on the servo you need to have the servo and transmitter frequency match
Assuming, that I want to use it with INR4-GYB with integrated GYRO, will plugin it to default channel 2 and setting the port to IBUS2 work ?
Should do as that port will be set to ibus 2 steering but I'll be doing vids and checking if anything else needs to be changed.
@@WTFRCCars more video Idea!🙂 Keep up the good work, you really are a great source of information.
By chance can you help bind my nb4 to my vxl set up🙏🙏🙏🙏🙏
Traxxas esc's are very slow so you will have to set the servo frequency on the nb4 to manual 280hz as digital is around 400hz and the traxxas esc's can't calibrate at 400hz it's too fast for them :)
@@WTFRCCars does it take a long time I put it in 280hz and still ain't binding
No it's instant which receiver are you using ?
@@WTFRCCars FS-FGr4
@@WTFRCCars ya I even tried my hobbywing 10bl120 and wouldn't bind 2 that either
Hey Craig, I got a question that no one seems to know the answer.
I just picked up a Hobbywing XD10 for one of my cars and while I know that you can control some parameters via I-Bus using a Noble Pro… No one seems to know if the same can be done with the normal NB4.
I get that the NB4 doesn’t have quite the same capability as the Pro but no one seems to empirically know the answer for sure.
I’d love your feedback on the issue. I would love a video on it but even a reply would be great.
Seriously. No one has the answer. Not Hobbywing nor FlySky.
The xd10 isn't listed by hobbywing as being ibus 2 programmable on their site and there are no settings on the pro or nb4 firmware for it? The only hobbywing esc that has ibus 2 programming at this time is the axe r2 system