Video

I have a problem and i hope to get answer, i connected new receiver from Carson under petrol rc car and steering is ok but throttle is reversed, all connected fine, servo of steering under channel 1 throttle under channel 2 on receiver and battery in slot, working, but as said, reversed throttle so forward making break and backward forward, yet forward with (idk how to say so please help) pressing release pressing realeas when i still hold reversed forward.

Very good and helpful videos. I have a question. Is it possible to copy settings, saved models and the settings assigned to them between devices?

I’m still ticked off with them. I paid extra for “faster” shipping and my NB4+ wheel had only JUST left China yesterday, a whole TWO WEEKS after ordering a part that should’ve been received over a week ago.

Very nice! Glad I waited.

Have to admit, the skin does look good...REALLY good...but, as I mentioned 'elsewhere', other than the display frame, I'm leaving my NB4+ 'naked'.

Hi WTF RC Cars.... do you still have this TNX? same condition as in this video?? can you sell it to me?? I'm interested in buying it .... please let me know Zoltan

Id love to see some of the GX 42kg brushless servo, put on that tester. It has an identical motherboard as the 9Imod bruahless servo, also the gears look similar, and they are selling for like $14 on banggood. I got the 2 I have from ebay, for $23 each. Very good deal for what seems like a great servo. 👍

Its a fun build 😀, I've built one for someone really enjoyed it 👍👍 ,

im hoping FS comes out with a 6 channel antennaless receiver for us racers

Love my Noble NB4Pro and this is next level!

That does look like it's going to be good. Are you going to get one for review?

Can the tr-3 or tr-4 dials be assigned to control the rear steering alone and do they have detents or do they move smoothly without notches in them? trying to decide if I want to get an nb4+ or not for a build I’m working on that’s going to be 4ws, the runtime and other features of it are definitely already pushing me that direction.

I do have a question, i have a NB4 3 years and I have just buy the new NB4+... can i export models from NB4 and import in my new NB4+ ????

I like your videos... ver well done

Brushless it will fly

Hi Craig, do you know if it has selectable English and Chinese Language in the menu

Would be awesome to have this in a stick transmitter 😃

Hasn't that one been out

That does look awesome.

I need it right meeeeeow

Do you have a good safe recommendation for the 18650 battery replacement for the nb4 pro? I would like to get the OEM battery if possible. It's a 3.6V 2600mAh for the nb4 pro correct? Thanks in advance.

HEY BROTHER I JUST WAS ON HELIDIRECT AND THEY'VE ALREADY GOT THE PRO+ ON PRE-ORDER FOR $520.99 U.S. SO I CAN'T WAIT TO SEE YOUR NEW VIDEO ON IT BROTHER GOD BLESS YOU MAN 🙏✝️ SINCERELY CLAY B.

I have my lightbar set to channel 4, I followed your direction, but the light constantly stays on and does not turn off when I press the button, any assistance would be appreciated.

The microzone c7 has a mixing mode that puts Fwd/Rvs on ch2 | and channel one combined with reversed channel 2 on channel one <-->. Seems like a software update could fix it.

Is the FCC and Standard firmware interchangeable? Does the FCC just use more battery because of the higher output of signal? Is that why people would choose Standard?

AWESOME VIDEO MAN AS ALWAYS CAN'T WAIT UNTIL YOU RELEASE THE NEW VIDEO ON THE NOBLE PRO+ GOD BLESS YOU BROTHER ✝️😎

I bought the 1st version after seeing your video last month. It works great.

HEY BROTHER ABSOLUTELY AWESOME VIDEO MAN AS ALWAYS!!! AND YEAH MAN I THINK THAT I'M GOING TO BE ORDERING THE V2 IN BLACK AND BROTHER AGAIN I CAN'T THANK YOU ENOUGH MAN FOR LOOKING OUT AND HELPING ME TO MAKE UP MY MIND ON GETTING THE NOBLE NB4+ AND MAN I THINK THAT I'M GOING TO BE GETTING THE NOBLE NB4 PRO+ WHEN IT DROPS ON THE 12TH. WHICH IS THIS WEDNESDAY ACCORDING TO FLYSKY FACEBOOK FROM WHAT I HAVE BEEN SEEING DO YOU THINK THAT YOU ARE GOING TO BE GETTING ONE TO???

Is it worth upgrading from g7p?

No thanks

I have never done an update on my NB4 since I bought it over 2 years ago . Can I just jump to the latest version shown here

I'm looking for a servo I can program for 6 rotation and standat size and high speed and torque. Any recommendation? Would like to program the 9imond line servo to more rotation numbers

Great info thank you That battery is tiny no wonder it doesn't last very long My vehicles too often outlast my radio

AWESOME VIDEO MAN AND I WANT TO THANK YOU AGAIN BROTHER FOR ALL YOUR HELP AND INFORMATION ON THE NOBLE NB4+ I JUST GOT MINE TODAY MAN AND I LOVE IT THAT THING IS ABSOLUTELY AWESOME!!! THANKS AGAIN MAN AND GOD BLESS ✝️✝️✝️ SINCERELY CLAY B.

Thank you

Thanks 👍👍👌👌✌️✌️

Can you adjust servo speed?

Hi, I got my GPS device and IT works well with my nb4+. But, did you know, how IT is possible to Show the vmax Max speed? I did Not finde any variable weithin the sensor Tab. Cheers Thilo

How is dual rate different than setting end points?

AWESOME VIDEO MAN AS ALWAYS!!! GOD BLESS YOU BROTHER ✝️ SINCERELY YOUR BROTHER IN CHRIST JESUS YESHUA IMMANUEL ✝️ CLAY B. & SPEED MOB RACING 🏁

Can you take a photo of the circuit board to show the device number, According to the specs, it this servo is a 32bit MCU. I would like to know if it is really 32bit or not. Thank you.

Really great video.. Do you charge the throttle channel to reversed when using Castle Creations xlx2, like on Radiolink and futaba And what receiver will i get the longest range with 😊

Good day RC friends, does anyone know why I use 3s with this hobbywing 2200kv combo and an XR8PRO ESC Are the batteries lasting 3 minutes? My batteries are 8000mah 80c 3s but they last 3 minutes or less. Is the ESC being protected from something? The motor says in the manual that it is 2 to 6s. and the ESC from 2 to 4s But with 3s batteries I have not been able to make the batteries last more than 3 minutes. if someone could help me

Friend, I bought a hobbywing sensored 10bl120a g2 sensored esc, do you use any 540 sensored motor on it? I'm wanting a surpass 13.5 T sensored? Does the motor being sensored work on it? I already have 2 esc 10bl120a g1 hobbywing, I didn't quite understand the issue of changing to g2!

Your videos are amazing and super helpful. I am having some difficulty getting it to set up correctly with my DLux MOA. I don’t see the Throttle and Drive selection in the mixing screen? Mine only shows 4WS, Brake Mixing and program mixing. Have you tried to do the dual esc and moa’s yet on it?

I believe I've just witnessed a 'miracle'. On a 'whim', I decided to try updating the Noble firmware using the FlySky Assistant software, even though all previous attempts over the past three years failed...but, for the first time, ever, I successfully updated firmware via FlySky Assistant...and, not just once, but twice. First I updated the NB4 (which I'm prepping to sell) to v2.0.101 (yes, I know v2.0.105 is available, but whomever purchases it can do that update). Then, a few minutes later, I started the process of updating my new NB4+ to V1.0.7-2. In all previous attempts (with the NB4), FlySky Assistant has always failed to successfully update firmware. In almost all of those attempts, the software would download the update, but would either 'attempt' to install the update, never getting past 0%...or, it wouldn't even start the update process. Also, in at least a few attempts, it wouldn't even download the update. In all previous attempts, I've always had to update via the downloadable firmware update files. Just thought I'd share this latest 'revelation'.

Great vid and informative I have a question , is it possible for me to use the flysky R7P 7 channel remote on my baja 5b ?

Thank you for sharing! I almost bought a pair of these for my Clodbuster, but found out that the ESC can't reverse the rotation of the motor, which is required for one of the motors in the Clod. I'll be looking for an alternative then. 😊

For the cost these servos are great. I've had the cls 45kg and the bls 45kg and the brushless seamed to be more precise and strong. I ran the cls 45kg as a steering servo in my E-truggy when my HiTec servo died, and I got 2nd place with it in there! Lol it did seam to struggle a bit strength wise, and compared to the 45kg bls, the cls moves a lot more freely. The brushless model is difficult to spin by hand. Overall for a racer on a buget or any basher these are great servos. I have 2 GX42kg on the way to test in a extra nitro buggy I built to have as a practice car. At 23 dollers a peice, i dont expect that they are gonna evwn be brushless. But the gear set looks identical to these 9Imod servo. Thanks for sharing this info! Cheers

Hey man, I just picked up a new Noble nb4+ and I don’t know which receiver I should get lol. Running mostly bashers like Xmaxx, Kraton 8s and other arrma 6s bashers. Could you help me out please, should I get one with the internal or external antenna? TIA