Flysky Noble Pro sensor set up and alarms CTM01 temp CVT01 voltage
Vložit
- čas přidán 14. 06. 2024
- Welcome back to Wtf Rc Cars,
Flysky Noble Pro sensor set up and alarms CTM01 temp CVT01 voltage
Flysky FGR4B receiver £26.54
www.banggood.com/custlink/mmD...
CVT01 voltage £8.54
www.banggood.com/custlink/DDm...
Flysky Temperature Collection Telemetry Sensor FS-CTM01 £7.99
www.rcmodelz.co.uk/electrics/...
UK FlySky FGr4B 2.4GHz 4CH AFHDS 3 Micro Mini RC Receiver £32.49
www.rcmodelz.co.uk/electrics/...
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.com/custlink/mDG...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.co.uk/electrics/...
For RCModelz link use discount code rcmz for 5% off most of the link prices. - Věda a technologie
Really help video. Thank you. 👍
Thanks for making this one ! I found it helpful
Glad it helped 🤠
Thanks alot for the video. Im waiting on my stuuf to arrive from Aliexpress
Cool
thanks for the video brother. very helpful
Glad ya like it :)
Thanks for the video. I just ordered a pile of voltage and temperature sensors for my cars, but I wasn't sure how they actually connect to the receiver.
Hello, thank you for this video. How can i calibrate voltage or temperature?
If you click into the menu of each sensor if calibration is available then you can change the value in there but for me the voltage and temp have been spot on as stock settings
Excellent video as usual! I did this a few weeks ago myself with the 4 channel enchaned receiver. One thing to note is that I'm using "2 channel, 2way" mode and one of the spare channels is changed to an input for voltage. My radio also sees the channel 2 BEC voltage from my RX so I guess I'm transmitting data on 3 channels which would be confusing as it's only supposed to feed data for 2 channels? Maybe I'm missing something here.
Ch and data links ain't the same, so you have 2ch throttle and steering then ibus for the sensors and bvd for voltage but they are transmitted as data not a channel if that makes sense :)
@@WTFRCCarsI understand what you wrote and I see I didn't word my question properly and what I really meant is that I wonder if the extra data being sent (ibus) has an effect on the overall latency advantage the 2 way/2 chan node brings to the table. Probably not enough to be noticed by the typical end user I guess.
The Ch gets priority over the data so shouldn't affect it much at all but ultimately 1 way will always be the fastest connection just you wouldn't really notice it at all as 2 way is so fast now
does the mode setting affect output voltage? cox I plugged a motor fan to ch3 but it just randomly go fast & slow when I pull throttle trigger. wondering if ch3/4 will react to ch1/2 action.
Nope that's you esc's bec dropping voltage if it's electric or you battery pack can't provide enough voltage for the servos if it's nitro
awesome vid, very informative
but what is the difference between a CTM01 one and a ATM01 ...
and can you get it to work on every receiver for the noble or are there exceptions ?
Thanks 👍
The ATM01 is for the iA10 receiver,
CTM01 is for all the nb4/pro receivers
And yes they work on all flysky receivers for the nb4/pro
@@WTFRCCars cool thanks, i think i am going to get some cause these do really look easy to install and a good thing to keep an eye on the expensive stuff
AWESOME VIDEO MAN AS ALWAYS!!! GOD BLESS YOU BROTHER ✝️ SINCERELY YOUR BROTHER IN CHRIST JESUS YESHUA IMMANUEL ✝️ CLAY B. & SPEED MOB RACING 🏁
Right on :)
@@WTFRCCars HEY BROTHER I CAN'T REMEMBER IF I TOLD YOU OR NOT BUT I ORDERED MY FLYSKY NOBLE NB4+ AND IT IS SUPPOSED TO BE HERE THURSDAY AND I CAN'T WAIT AND I REALLY WANT TO THANK YOU BROTHER FOR LOOKING OUT AND HELPING ME MAKE UP MY MIND ON GETTING IT AND ALSO MAN I SEEN YOUR VIDEO ON SETTING UP THE REGULAR NB4 WITH SHIFT POINT AND LINE LOCK AND IS IT SAFE TO ASSUME THAT THE NB4+ CAN DO ALL OF THAT AND MORE??? THANK YOU AGAIN BROTHER FOR ALL OF YOUR HELP AND ALL OF YOUR AWESOME VIDEOS MAN THEY REALLY ARE TOP NOTCH GOD BLESS YOU BROTHER ALWAYS AND FOREVER ✝️ SINCERELY YOUR BROTHER IN CHRIST JESUS ✝️ CLAY B. & 🏁SPEED MOB RACING🏁😎
@claybrown1619 yeh drag set up is exactly the same on nb4+
I just picked up this sensor and would like it to monitor my nitro engine..any ideas how to attach it to the button head? When I temp the engine with a temp gun I temp it from between the plug and exhaust port.
You could use a thermal pad and stuff it between the fins at the bottom of the heat sink
ahh good idea, I dremeled out a small hole for the sensor in the cooling head so the sensor sits up against the head button. I tested it vs heat gun and there is a 2 degree delta...but damn the wire coming out the back of the head is ugly lol@@WTFRCCars
@kawicepticon8866 yeh no nice way to hide a sensor
Salut !! Les capteurs ont pour tension d'utilisation 4.0-6.5V DC. Si je règle le bec de mon ESC à 7,4V, est ce que je risque d'endommager les capteurs ?
I've not tried them at 7.4v so not sure
@@WTFRCCars Je fais en faire fonctionner avec un ESC Hobbywing Max8 avec le bec à 7,4v. Je verrai bien.
Are there RPM sensors for the Petrol ⛽️ engines? Great Vid Thanks WTF.
No the rpm work on anything
You can set the sensor up to any rotating part to get RPM. Optic sensor or magntic hall effect sensor
Is the steps the same for the non pro model noble
Yeh pretty much I have done setup vids for the none pro too in the nb4 playlist
Hi buddy I have the flysky noble nb4 with all sensors are they easily setup with the nb4
Yeh there all easy to set up
Do I just set them up the same way you set on the noble pro
Yep if ya look through the nb4 playlist I got vids showing how to do it
@WTF RC Cars thanks for your help buddy much appreciated
As a total noob to sensors what is ibus and sbus ??
And what was it you plugged in to A as the camera didn’t catch it 😗
Ibus is the protocol that the sensors connect over so you have to set one socket to ibus, Ch 4 or port A was just the battery to power the receiver from like in a nitro RC but in electric RC it's not needed as the ESC powers the receiver :)
@@WTFRCCars Thanks for replying 👍
Sorry my mistake , not A the battery …. the next one you plugged in
Ch1 steering ch2 throttle ch3 not used ch4 sensors top socket is BVD you can connect battery to any that are free channel
How would I hook up a voltage sensor for a dual battery set on Xmaxx? Positive and negative coming off max 6 , or into the "splitter" going into the two batteries??
You would connect it to the pos and neg going to the esc :)
Hi, i have a noble pro with inr4 reciever and a ibus 2 GPS. Now i want a temp sensor ad to the transmitter but i can‘t find ibus in. Do you now what the Problem is.
Set one of the inr4 GYB ports to ibus in
If i set one port to ibus2, there is no ibus in on each port
If i set ibus in, there is no ibus2 on each port.
@user-on2gu6ok4u what options do you have for the other channels
If i select on on NBA ibus2 for the GPS, i have on