CHEAP VS EXPENSIVE: M110 VS M100 - WILL IT REMOVE 1500 GRIT SANDING MARKS???
Vložit
- čas přidán 7. 08. 2024
- M110 VS M100 ROTARY AND DA TEST
PRODUCTS USED IN THIS VIDEO:
M100: amzn.to/2KXg8j0
M110: amzn.to/2KXg8j0
MICROFIBER TOWELS: bit.ly/JimboTowels
PICK UP THE JIMBO HAT: jimbodaily.com/products/jimbo...
CONNECT WITH JIMBO:
PODCAST STORE: www.JimboDaily.com
PODCAST: www.AutoDetailingPodcast.com
FACEBOOK: / autodetailingpodcast or / jimbo.balaam
INSTAGRAM: / theautodetailingpodcast or / jimbobalaam
PO BOX:
Auto Detailing Podcast
1077 E. Pacific Coast HWY
Seal Beach, CA 90740
#CheapVsExpensiveCarCare #AutoDetailing #AutoDetailingPodcast - Auta a dopravní prostředky
Great video, I was just doing some research to figure out the difference between those 2 compounds...Thanks for making the video.
Hey Jimbo! Great comparison and clearly understand that what would i use for the product
But i still confused, for this compound should i do just 1 time or i can take 2 until 3 time? And maybe you know about limit for every step polished
Thankyou 🙏
I have been using meguiars for years and just picked up some m110 about 2 weeks ago and love it. Like you said a little more expensive but it’s a top notch product 🤘🏼
Sir you got me as a subscriber! Absolutely awesome video! Keep this up!
Thanks!
Great comparison video. Your best to date. Thanks !!
Wow. Thanks!
@@autodetailingpodcast how about some "Poorboy's World" products?
Love ur videos Jimbo !
Greetings for Belgium
Thank you!
Is Shine Armor better was thinking about getting it. I already have Griot's wax and detailer plus Meguairs Ultimate product I used the Meguairs Ultimate on my truck but it still didn't shine a lot but I buffed it by hand mostly. I do have a polisher but it is more of a orbital palm polisher I don't have the one you have in the video but thinking about getting one soon in the store. Maybe this week I could get one.
Switched from M85 to M100. (I work on boats) M100 has been cutting really well on heavy oxidation with a rotary with wool and finishing really nice on a dual action with heavy polishing pad. I use this the exact way you did in this video and get great results. M100 is my money maker and work horse.
For sure - it’s a great product
Damm I just bought some 85.. i have M100 aswell but 85 cost 10$ for a 32oz at pepboys and was like why not! Is it still a decent product??
I love the old school 80 series.With M85 and it's diminishing abrasives I get a really nice finish just by changing from wool to a polishing foam pad.
It's not very often that I agree with every statement someone says in a detailing video, but you nailed this one Jim. Having this comparison for reference is huge. Now I'm wondering - since Meguiar's is boasting M110's work time and finishing ability, how does it stack up against D300? I would assume similar characteristics but with less cut.
thanks man! Im not sure as ive never been a fan on D300 - it never had enough cut for me, but it would make for an interesting video.
Another great comparison! I’ll stick to M100 since I don’t see it vastly improving the time it takes to get the job done or the end results. Keep them coming. You’re helping the community way more than some of the people that promote “only the best and most expensive will do”. Ah-hem Matt OG
Thanks man!
Jason Holder of course they do that lol. That’s how people sell the “I’m a professional” and their outrageous prices to their clients. If people really stopped to think about how easy, affordable and doable this is right at home they’d never pay someone else to haha. But as long they keep paying I’ll keep detailing 😅
@@davidmorales7371 you are a idiot I have seen many idiot's like you trash there cars cause they think they can watch a video and do it there self takes years and experience you lack knowledge.
@@clawmachinetime955 I get your frustrations, but there's no need to offend people on this community or comment section really , instead of fight them educated them is the best response . (Dwayne Johnson AKA The Rock) once said . In a world where you can be anything BE KIND
I appreciate Jimbo as much as I appreciate Matt of OG garage .@Jason Holder Jimbo an Matt are two different person completely different content they both contribute to the community an industry on there own perspectives I agree with you sometimes prices can give you a turn off but there's things in life made premium for a reason if you don't make premium products people will not strive for more for that reason no goal settings there's a market for everyone
Awesome content like always ,hey bro can share the link for those cabinets I'll appreciate it 🤝
After the M100 or M110 can use a 2 or 3 in 1 menzerna for the finishing?
so i guess after these m205 then a good wax ...what wax lasts the best?
Hey Jimbo, what rotary did you use?
Jim, another terrific video as I am about to buy the 110 and 210, then apply the Meg ultimate wax. From what I read, Meg introduced the 110/210 with intention to reduce dusting for detailer’s respiration safety. Keep in mind, I never ever compounded a car, hence why I’m here watching and learning! Thank you again!!
You’ll do great! Thanks for watching
Thanks for this. Been using 100/105 for years and just as most are , anoyed trying yet another product esp mags. I love Mags, but stop changing stuff. I do love the 300 paint correction tho. Works amazing for light defect. Great video man thanks
What Meguiars Diamond Cut is Considered a Polishing Compound
Great video!
Thanks
How does M300 compare to the ultimate compound ?
That was interesting. This video series is really helping, i have crappy little car but i do love try to get it looking good and your helping fill the cleaning shelf.
crappy cars can still be clean cars!
Great video
Thanks!
Hey Jimbo!!!
Going through all your videos and other fellow Detailers that you are friends with ( Brian, Pan, Scott... etc) and was wondering if you ever mixed product??
For example I mixed Meguiar’s 4 heavy cut with Ultimate Compound to reduce dusting.
Do you?? Please make videos of your “go too” mixers
Cheers
I do all the time. But usually get burned to death in the comments when I show anything other then “directions on the label”
JIMBO'S DETAILING
😂 you need to understand that you have a vast following of different people. Some people are jerks but some others are here to actually learn and improve!!! I am a “Novice “ and trying to improve my craft and have been contemplating on taking a course in P.A by “ Apex Detailing “
Wipe down with a hydrocarbon panel wipe and you'll see some marring re-appear. :) Thanks for the video!
Hey! My city just cut all of our trees, and I park on the street, My car is COVERED in tree sap. Some of it has been sitting for upwards of a week, and its really hard to get off. What is your best Method of removing mass amounts of hardened tree sap???
Thanks!
KiddoTheSkiddo DupliColor makes a panel prep/body solvent “Prep Grease and Wax remover” that will melt just about anything off your paint.
It’s pretty intense to work with, definitely use it outside or with lots of ventilation.
Rustoleum also makes a similar product but I find it’s less effective. It’s called “Wax and tar remover.”
Wait what?!?!? You in SoCal? I’m in SoCal also! I’m going to visit your shop.
I didn't get the dusting you did on DA. Maybe was that a brand new pad? I did have an issue with brand new pad on first panel of the foam dust coming off, but when I switched to a used pad it didn't dust at all. Also after first panel/area with new pad the "dusting" was gone.
But I get the foam dust with new foam pads. Lately I've been running a brush Iver the new foam pads while running on machine to kind of break them in and get rid of the foam dusting. Seems to help.
I think that was the issue too.
Yeah I used to think anything I used dusted. Now I just run a bush over the pad mounted to my polisher at low speed for a bit and let the foam break in a bit
@@2010stoof What kind of brush would you use for that?
Hey there, are these two compound also good and give similar results for oxidation on a gelcoat boat?
These would work for that
I bought a boat with heavy oxidation on black gelcoat and "Owatrol Marine Polytrol color restorer" made it look almost new. Best $30 ever spent.
Good to know
i bet using m100 with your da and a foam cutting pad you could handle 2000 grit wet sand scratchs if you moved da slower on panel... then finish off with m 205,
Do you recommend using a cutting pad before using a foam polishing pad?? i have the m110 and i noticed with the foam polishing pad it doesn't cut deep enough to get 2000 grit wet sand off, or water spots. i feel like the 110 needs a cutting pad to actually get 1200+ grits off. shit even with the foam pad i cant remove all swirl marks.
@casiotechI I have DA set to about 5 and I use orange. Its consider a heavy cut polishing pad
For best results when leveling 1200-2000 grit sanding marks, wool or microfiber is going to give you the most cut, a foam cutting pad will work also, but it might simply take longer or require a second pass, the good thing is that foam usually finishes better than wool or microfiber.
Lol I know this is an old video but I'm glad to see the self deprecating idgaf honesty hasn't changed.
"Also I went to three different stores and couldn't find any 1200 grit sandpaper"
The truth eventually comes out and it's usually a funny self dig.
sorry i'm french and do not understand everything 🙏. what do you think of the new M110 compared to M100 and with M105 ?. Thank you
as for M100, it doesnt dust like 105 does and also,imo, does a quicker job of cutting than the 105.
Great video, based on what I saw in your video I got the 110, and the results are terrible
It’s like I have used absolutely no compound
Didn’t remove Im even the swirles
I have a 2012 Camry with normal swirles and scratches, any idea why this product doesn’t work whatsoever for me ?
I’m using a Ryobi orbital with a microfiber pad
Looking for ward to hear your opinion if you could thank you very much
i would say its most likly your machine. If the one you mentioned has two handles, then its def your machine and you need a dual action machine or one that has forced rotation. Stay away from rotary, but something with more power will help a lot.
@@autodetailingpodcast the rotary i used has no handles, I even tried without the rotary, just a microfiber cloth and the compound and still no results. Thank you for your response, I appreciated it
its a bit weird because the 110 combo with microfiber pad cut and remove swirlmark flawlessly on my w204 mercedes paint which is known to having a hard factory clearcoat.. it should work better on japanese car because their clearcoat hardness is on a moderate level.. and i use a bauer 21mm DA.
Hey can you try on your metal panel if you sand it then spray clear over it if it will remove all the scratches?
I've tried this with 5000grit sand paper on card board it did look to fully remove any defects but there is no depth in my simple cardboard spray paint with two layers of clear
im sorry but any polish that "dust" alot isnt worth it there are tons of compounds/ polishes that dont dust as a pro when you fully correct a car and its covered in dust and the only way to quickly remove the dust is to wash the car again vs a non dust all you need is an ISO wipe down and straight to coating time is money brother im more of a fan of the sonax compounds at the end of the day
Can i use m100 with a DA and a Meguiars MF Pad?
Yes
Well the rupes random & DA polishers put out 3,000 to 4,000 rpm on my lowest set setting. Does that mean its not for me?🤔
I was informed a microfiber pad gives a better result.
It’s all preference. Rupes has been the standard machine for years now.
How do these compare to m105?
Smokes it big time
Can you use this on glass
i wouldnt.
5 year later, and Im still using M85
Confused ! when you say “ cutting “ what does that mean , not polishing its cutting ? WHAT , I’m new to this, I’m retired and plenty of TIME on m6 hands , TKS
So many years later and still helping people like me out. Is M110 still the best around as of 2024?
It’s def still up there all these years later, but 3D ONE is my current favorite and slightly better than m110.
@@autodetailingpodcastfor cutting or finish? 3d goes to 1500 ?
Thanks friend, God bless you and keep you in the name of Jesus, amen.
How does that panel still have clear coat 😅
TOYOTA BABY!
Love m100
100 can I use it with da?
Saul Rodriguez 100 with wool 👍🏻
Im trying to use the M100 on my car. I have it for 3 years but never done anything like that on the car. Can i just wash it and put this on? Then finish with the turtle spray wax? Anybody?🙂
Wash, clay bar, prep, then you’re ready for compound and polish then finally sealant
Could you try the Turtle Wax Ice compound? I haven’t seen much info about it. It’s like ten bucks.
Is "dusting" so much of a bad thing or is it just a nuisance?
With all the modern newer compound in the market right now, having a dusty product and hard to wipe is a nuisance, needing extra step to clean it later.. other modern compound such as from 3d and sonax produce almost no dust and easy to wipe..
@@harisyoung4110 m100 is incredibly easy to wipe though, in my experience. Also one of the easiest compounds to wash out of pads.
A detailer nuisance only because time is money. For the regular DIY, it's exaggerated. Just wipe with a soft cloth
Do m200 and m210!!!!
Woo hoo!!!
110 may be the new world order, but not so much after this video. 😃
new world order??? SMH
I can see if you're a detailer and worry about dust but here I am wet sanding a whole damn car and polishing the whole goddamn don't care about dust. Great video otherwise
It never rains in S California 🤣🤣
A bit repetitive. Lol. Dont start slapping meguiars into the chemical guys category. Lol. Meguiars products are actually legit.
And i doubt any detailer use 1200 grit detailing. Its just explaining what it can remove if really needed. Muppet
He just said that. muppet.
@@joeschmoe6908 joe has spoken. Muppet engineer.
M101 cuts alot more than m100.
I was looking for a quick 1-step to clean up my pearl white G35. Tried S20 Black, Jescar Correcting Compound, M300, and M101. Ended up going with M101 on my Flex 3401 paired with a LC Hybrid cutting pad. Cut and finish was great! Surprised M101 was still working strong. I've had this massive 32oz bottle for 8 years.
I do alot of paint correction and alot of 1 stage compounding for a living and m101 foam cut compound is a great product, i have 4 gallons of it in my garage.... compound pad and a 21mm da and it cuts and finishing down to a near perfect finish, kicks up alot of dust tho.
In 3 years the prices have doubled they are now $40 and $23 at Harbor Freight. Thanks Biden.
🙄 make better financial decisions and give it a rest. SHEESH!
@@bosshawg7427 What are you on about? You assume I over spend because I noticed inflation is through the roof? You can continue to sleep through the worst administration in the last 30 years just do the rest of us all a favor and don't vote.
@BPattB do yourself a favor and take your whiny political rants thrown at every irrelevant chance somewhere it matters. Just whine and cry is all you fools do. If a few extra bucks hurt your pocket, no president can help you! Leave the planet. Inflation is global... educate yourself. Apparently you haven't
Why are you talking my so much. Do the product demo and stop the chatter. Your polishing all over the place and your giving it a Terrible representation.
I have a podcast too if your interested
Why watch???
Has anyone use this in a very stubborn water spot on car windows
Use a water spot remover like an acid for best results