Frame Assembly - Falcon RPM 7.5" Cinematic / Long range FPV
Vložit
- čas přidán 28. 07. 2024
- What's included in the package along with detailed assembly instructions for the Falcon RPM 7.5" cinematic and long range FPV frame. Also includes a closer look at some of the frame design.
NOTE: For a build with an air unit you'll need a long camera to air unit cable. I recommend the Iflight 215mm or runcam 300mm coaxial cable for a DJI 03 setup.
Get the frame here:
Falcon RPM 7.5" Cinematic / Long Range - bit.ly/FalconRPM
Flacon RPM TPU parts on thingiverse - bit.ly/FalconRPM3DPrints
Playlist of Falcon RPM related videos - bit.ly/FalconRPMPlaylist
My other Long Range FPV frame designs:
- RAD Li-ion 7" Long Range - bit.ly/3MFoCdg
- RAD Scout 7" Xtra Long Range - bit.ly/3kyvPDy
- Falcon 7 Cinematic Long Range - bit.ly/3jUiLUI
Parts list and affiliate links for 6s long range build - (great reliability and balance between power and efficiency)
T-Motor F7 Pro flight controller - bit.ly/3xtW1mE
T-Motor F55 Pro II ESC (4in1) - bit.ly/3uITNOF
Motors for 7" props: T Motor F90 2806.5 1300kv - bit.ly/3M4fjDg
Motors for 7.5" props: T-Motor Velox 3008 1500kv - bit.ly/3QJ8Gcf
Camera Butter ND Filters - bit.ly/3WZmSQR
7" props for RAD Scout - Gemfan 7035 (tri-blade) - bit.ly/3vdSzKu
7" props for RAD Li-ion - Gemfan 7037 (tri-blade) - bit.ly/3rvCz5f
7" props for Falcon 7 - Gemfan 7040 (tri-blades) - bit.ly/3YaxFrZ
7.5" props for Falcon RPM Gemfan 7535 (tri-blades) - bit.ly/3vdSzKu
VTX antenna TrueRC Singularity - bit.ly/3xvXFEg
VTX - bit.ly/3JHWW5l
Receiver - bit.ly/3xuMGv8
FPV camera (analog) - bit.ly/3JL88OT
GPS - bit.ly/3uJjRci
Receiver antenna - bit.ly/3jG7o2L
Video Chapters:
00:00 - Introduction
01:15 - What comes in the package
10:30 - Fastener list
11:25 - Installing the arms
18:06 - Standoffs
20:00 - Rear standoffs and optional bottom cover for RX
21:55 - GoPro mount
23:00 - FPV camera mount
26:40 - GPS SMA mount / Top plate
27:48 - Spare fasteners and secondary GoPro mounts
29:25 - Secondary GoPro mount use and purpose
31:40 - Video recommendations
Support the channel on Patreon: www.patreon.com/user?u=48131636
Check out my frame design page @ CNCDrones: bit.ly/3vvRrD7
Use this link for the purchase of anything from GetFPV with no extra cost to you, but it helps the channel out: bit.ly/3roKZui
Thats a fine looking frame, Conrad!
Thank you!
Just ordered one of these frames myself after seeing MurdersFPV's build. Looks amazing and exactly what I need for our Ozzie terrain! Thanks Conrad! 👍❤
Thanks so much! Hit me up if you have any questions, falconradfpv@gamil.com. BTW I've been told that a 200mm cable for air unit to camera has worked but I used a 215mm one and it seemed to only just make it. Iflight makes a 215mm and runcam makes a 300mm DJI 03 coaxial cable. Not sure about really long coaxial for the vistas...only found 200mm so far. I'm looking into sourcing some.
@@FalconRadFPV Thanks mate, I've flicked you an email. Managed to source some 300mm 03 cables here in Oz. Like you, I can only find 200mm coax cables for the vistas.
Conrad,
I just ordered my RPM frame. I'm hoping to have it assembled next week so that I can take it on my next trip.
Oh great! I hope your build goes well. Let me know if you have any questions.
I think I know which frame I will be buying for my next longrange build 🔥🔥
I order all my frames from cnc drones. Not only are they top quality, but also local.
I just ordered it and can't wait to receive it.😄
@FalconRad FPV
Finished assembling the frame and electronics.
Waiting for the 7.5 inch propeller to arrive.
What are the recommended filter settings?
Sorry about the late reply. For filters I have the sliders set to either 1.2 or 1.3 for both my builds of the RPM frame. I've got the second gyro filter turned off, RPM filters set to 3 of them with the lowest frequency at 80hz, and number of dynamic notches to just 1. Email me @ falconradfpv@gmail.com if you want some screen shots of my filters tab.
When doing your long range, do you use a stack with a baro and use a gps with compass? Love your video's
I use the barometer and gps, I don't use the compass if it has one.
Mr Rad, i received my frame... Could you advise which gopro mount should be used for the rear? I'll be running a Matek m10 with compass bardpole and sma. Thanks, man. love the frame
email me at falconradfpv@gmail.com and I'll get you set up with the right stl files.
Do you like the digital or analog better for long range. I will be getting your frame and i have walksnail and analog so didn't know what i should go, Because the rush max looks nice.
I love the video from digital but I am much more confident flying an analog setup for long range.
How would this frame workout with a HDZero setup, same as dji? Fpv camera mount for the runcam HD same. Waiting forever for my Rekon 7” pro frame. Could easily drop a hundred on this frame.
It has 20x20 , 25x25 or 30x30 vtx mounts in the rear. There is clearance to fit a VTX up 44mm long x 50mm wide when centered on the rear mounting location. The FPV cam mount will fit both two screw DJI style as well as regular single center screw style camera mounting. Almost any fpv camera should fit the mount. For now the 3D prints don't come with the frame. But they are all up on thingiverse to download.
Is the receiver cover(s) available? I can't seem to find them and my designing skills are extremely lacking.
right here.
www.thingiverse.com/thing:6052343/files
Finally built up the frame and mounted everything. Here’s my maiden flight.
czcams.com/video/YjX7Po9gwDc/video.htmlsi=yDROQzMzO7rfIpxr
Great flight and color grading!