2016 - 2024 Toyota Tacoma 5 Channel Amp and Sub Install
Vložit
- čas přidán 5. 08. 2024
- Parts linked in the description below!
Watch a full tutorial as a 2023 Toyota Tacoma will have a new 5 Channel Kenwood Amplifier and Kicker Subwoofer installed to the factory audio sound system. This amp and sub will provide power to the door / dash speakers and subwoofer for a significant enhanced audio experience.
Note: This vehicle wasn't equipped with JBL from the factory - If you have JBL, and you plan on replacing the factory JBL amplifier with a new 5 channel amplifier, we will link those parts to bypass that amp below.
This video applies to Toyota Tacoma models for years 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and 2024. This video also includes amplifier wiring, rack assembly, factory integration, and installation.
Click here to see the front door / dash speaker install on a Tacoma:
• 2016 - 2024 Toyota Tac...
Click here to see the rear speaker install on a Tacoma:
• 2016 - 2024 Toyota Tac...
Click here to see a small 8" powered sub install on this Tacoma:
• 2016 - 2024 Toyota Tac...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Kenwood 5 Channel Amplifier: amzn.to/3tjoj3a
-Optional Bass Knob (not included w/ amp): amzn.to/48yT704
*Kicker Comp RT 10" Shallow Mount Subwoofer DVC 4: amzn.to/3RXmgfN
*Skar Audio Tacoma Subwoofer Box (Empty): amzn.to/3rpdrQZ
--NOTE: The Skar LOADED enclosure (Skar sub comes already in box) comes wired to 1 ohm, where most 5 channel amplifiers are not 1 ohm stable on the sub output (like the Kenwood we used). We recommend the empty enclosure so you can add a sub to be wired to 2 ohms which will be stable at most 5 channel amplifiers!
*Red Wolf T Harness Adapter (2020 and newer Audio Only): amzn.to/33reILj
-For a full T harness, use the Pac LPHTY02 (with accessory power): amzn.to/49ySjIP
-For 2016 - 2019, use this Red Wolf T harness: amzn.to/3DQlAAo
-OR the Pac LPHTY01: amzn.to/3Ji5O4b
**If you want a harness made by us for any 4/5 channel amp, click here:
www.provobeast.com/product-pa...
*Skar Audio OFC 4 Gauge Amp Wiring Kit: amzn.to/31f0r2U
*9 Conductor Cable Speaker Wire 20': amzn.to/3xK4PSk
-If you need a Line out converter for your install, here are some options:
-Basic 4 channel LOC: amzn.to/3PWSje1
-Mid-grade 4 channel LOC: amzn.to/48CEmtl
-Premium 5/6 channel LOC: amzn.to/3zRQXXY
*ABS Plastic Sheet 12x12": amzn.to/3xJATWT
**If you have JBL and will be replacing the factory amplifier while retaining the OEM Radio, here are the parts needed according to your year Tacoma (according to PAC):
*Pac AP4-TY12 Amp Pro LOC (2016 - 2018): amzn.to/46rnkwR
*Pac AP4-TY13 R.2 Amp Pro LOC (2019 - 2024): amzn.to/3PGZplw
****If you factory JBL radio controls the EQ, Fade, Balance, and volume at the radio itself and NOT digitally via the amplifier, you MAY be able to avoid the PAC Amp Pro Harness (although they are a great solution) and use the Pac LPHTY01 or LPHTY02 breakout harness instead (depending on your year) AND the Amplifier Bypass harness linked below and your chosen LOC.
*Pac APH-TY04 JBL Amplifier Bypass Harness (2016-2017): amzn.to/46dAxJe
*Pac APH-TY01 JBL Amplifier Bypass Harness (2018-2024): amzn.to/3LKICNw
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases - Auta a dopravní prostředky
Parts used linked in the description of the video!
Is there any way you could do a video on the actual JBL system, on how to upgrade the amp and sub please?
Thank you very much But how about the tweeters are they connected to the harness to the amplifier ??? Thank you very much
was specifically looking for a tacoma guide, and this was posted today lol thank god
Did u do it?
Hey provo beast audio, or whoever is the man in the videos! I got my avionics degree last year and learned all about wiring and sine waves. It got me into a new hobby of car audio. I used one where you worked on a Tahoe to install my system. Now I watch your videos for entertainment
Hey buddy, It's Chris (the man behind the curtain). I'm a one man show, so I appreciate the good words of encouragement. Glad you like the content! Cheers!
I wish these fancy factory radios came with RCA outputs already 🤦🏻 This was really helpful, as soon as they drop a 4x 6.5 woofer box for the 24 I'll be revisiting this 👌
How crazy I just bought this amp and need more info on a 5 channel. im amazed to see i dont need to use the rca cables. this video really helped me understand the install also bought the plate for it to... thanks again
really good video easy as pie thank you
What a clean job, top work 👌
Another excellent video, thank you.
Super clean install
I agree! This install was so clean!
Awesome set-up!
Great work!
I just saw a professional, I congratulate you, very good video and well explained. I would like to know where you are located.🎉
There's no eco from the shop/garage. It's hard to trust you. Lol, I'm just kidding. Can't be penalized for quality. Thank you for the video.
Echo though.
It's as if you made a custom vid just for me... simpatico, muh man....
Great tutorial 👌🏾 quick question how is the 2019 tacoma Red wolf harness set up looks like I just ordered it do I just use the speaker wires and connect the rest of the wire together?
Really nice install, perfectly narrated.
I noticed that you didn't use an aftermarket waterproof firewall grommet, was it because it was just easier to do so or was the customer on a budget?
Hi, thanks for sharing this good video. Question do you know if there’s a Kicker amp with the same option as the Keendwood amp so i can use the same cables you’re using to power my door speakers and 2 10” subs?
Thank you for the video. Quick question my Taco does not have a JBL system but it does have Navigation so that means that I do not have an amplifier?
To anyone who has used this amp and connected it this way - is your volume loud?
My music sounds clear but I kinda expected a little higher volume, but with the amp dialed in Immy speakers and sub are not that loud. I installed this amp and a 10” jl in a stealthbox and infinity primus 6x9s in the front and infinity reference speakers in the rear.
How much louder and better is the sound of this system versus the Rockford system that you did 8 months ago
Right??? What’s the answer lol 😂
Double tapping this! 😵
This please
your link to a tacoma front door/dash speaker install takes us to a Ford F150 install.. might wanna fix that one
Have you happened to have done a tutorial on a 2017 non jbl red wolf t harness?
Great video! I am confused by the LOC set up. I want to get an amp that will amp all my 2020 Tacoma speakers plus add a sub. Do I need a 5 channel LOC and a 5 channel amp? I currently have the cheap 2 channel LOC ‘add an amp’. But something tells me I can’t use that with a 5 channel amp. I’m so confused.
Great video!! I am planning to do the same setup. Can you share the crossover settings used?
A great place to start is around 80hz for low pass and high pass. You can lower the HPF if needed based on the speakers you install.
I really enjoy your videos, very detailed easy to understand. Quality content. I just got myself a 23’ SR5 and I’m going to upgrade the speakers.
Mind you, I am an absolute amateur when it comes to all of this audio system wiring and what not. I’ve always had models with whatever available premium factory audio.
I was eyeing the JL stealth box but thanks to you I’ve really been looking into and am impressed with the Skar custom fitted box.
This video you’ve made is practically a diy step by step installation video.
Can you clarify with me, when you add an amp (as you do in this setup) for the sub does that amp in turn power the door speakers as well?
You make this look a lot easier then I had imagined, would like to do this myself. Thanks!
Hey there thanks! Yes, this 5 channel amplifier powers all interior speakers and the subwoofer, one amp to power it all. 4 channels power the front / rear / dash speakers, and 5th channel power the sub.
Hey did you end up installing it? I’m wanting to do it to my 2023 tacoma as well but I don’t know if it’ll be loud enough lol
Is there anything additional you need to do on this amplifier for the subwoofer channel to work when using the high-level input connector like you did on this install? when running the four channels of power from the radio to the high-level input, the subwoofer channel will work?
Man! This is a great video and a super clean install. I want to do this same thing (almost) to my 21 4Runner. I have already replaced all of the OEM speakers with Kenwood Excelon. Question; keeping the OEM head unit, how could I do this with an under seat powered sub and 4 channel amp instead? I'm not in to heavy bass and don't want a large sub enclosure in my cargo area. Thanks!
Send me a message on facebook or instagram and we can help build your system!
I have the exact amp im gonig to install. If i install it just like you did it will tum power to all my speakers right?
Hello question so if I wanted to to a different sub and box with this setup to sit on the seat like a 12” with a decent size box would the amp know not to blow out the speakers in the doors when I push it hard? That’s all I’m a little confused about
What’s wrong or different with using the SK-M5001D | 500 Watt Monoblock Car Amplifier with the loaded enclosure ?
I have a 2017 Tacoma double cab, does the speaker box slide in with out cutting?
Did you have to adjust the input sensitivity on this amp given that you're using high level input? Or is that only if low level input is being used?
Does kicker sell a 12 inch subwoofer box that fits or is this the only enclosure for tacoma
Thank you for the video. Quick question my 2023 Taco does not have a JBL system but it does have Navigation so that means that I do not have an amplifier?
I want to install this same amplifier to my 14 accord. Will a lc7i sound much better or not really, in your experience
Hello so did you use the kicker 4 ohm subwoofer or kicker 2 ohm subwoofer
How did you actually get the input signal for the subwoofer? It doesn't look like that harness had the wires for it.
Hello. How did the sound in rear speaker sound? In my Toyota the rear sound from headunit its wery low and Almost no bass.
And amplyfy that weak signal just get louder ?,,, but still no bass ? Right. ??
Will this mess with the DCM and remote start and such?
I just bought this sub with the preinstalled subwoofer but I have an amp that only has 4 ohm and 2 ohm connections, the sub is pre wired to a 1 OHM connection. Is it possible to rewire this to 4 OHM so that way I can use my 5 channel amp and power my doors as well, without having to get a mono amp or a different amp?
Do kicker comp r fit on this enclosure or is it rt
For a JBL equipped Taco, do you know if the Kenwood x802-5 would be able to mount within the factory JBL amp space behind the rear passenger seat? Also, if the HU has already been replaced with an Alpine Halo9 HU, would an Amp Pro LOC be necessary?
Question?
If a amplifier put out say 75 to 100 watts rms iis the factor speaker wire able to handle this power or should we go with a thicker guage wire?
(Lets also say we also upgraded the factory speakers to speakers that also handle 75-100 rms.)
Thanks
Maybe you can help me here I’m trying to do some research and I can’t find anything. I have my amp hooked up to the line input on that same amplifier. How do I add an epicenter since I’m not running RCA to the radio
As of today (11-03-2023) 2023 with JBL is not listed as compatible with any PAC, harness or any other brand converter... or am I missing something?
I did the same as you did but my sub only works in reverse. What do I do?
Would a dual 4 Ohm sub work with this amp? I don't understand the "dual" part.
How do you secure the amp to the plastic panel?
Was any steering wheel or any other functionality lost?
Thank you for sharing this helpful video. Are you sure the T harness is compatible with 2024 Tacoma non-JBL? I'm going to order one if so. Thanks.
Absolutely. If you want want a prebuilt universal amp harness made by me, it's on provobeast.com.
Thank you for the video, love the step by step! One question, that blue signal wire was connected on the out put side via t-tap, and I noticed you said it doesn’t need it on both sides so does that mean on the input side I can just leave off/not connect the blue wire and kinda cap it off? Or does it still need to be connected on that side of the harness to going into the amp. Thanks!
This amp "should" turn itself on without the use of the blue wire as it has a signal sense feature. Some amps don't have that feature, so you'd connect the blue wire to the remote input of the amp and the other end to the manual connection behind the radio for accessory.
@@ProvoBeastAudio i appreciate it, I just got this amp and ready to connect it this weekend!
Great video. Quick question as to how you attached the amp mount to the floor?
At 19:40 it looks like we have a pretty good view of some black sheet metal screws. But I could be wrong.
Great Install! I have a question? do the front dash speakers still remain Functional? do they still get signal from the Factory head Unit or amp ?
Great Question????
How did you mount the ABS to the truck? I want to do the same set up and that’s the only thing I’m not sure of.
I was wondering the same thing. Maybe with sheet metal screws...carefully?
Will that t harness work on my Sony 9500 es head unit? And if so would I still keep the hi res audio from the Sony 9500 if I hook up at 4 channel amp.
I jus want to boost the power
If you have a an aftermarket radio, you won’t need t harness - instead just run rca cables from the radio to the amp, and speaker output from the amp to the radio harness adapter.
Looks great! I just received the same box but purchased the Skar Very Shallow mount sub, however the sub is still too deep. My question, did the comp RT fit without modification to the box? For the Skar VS-10 D2 to fit I would need to add a trim ring around the sub to lift it up about a 3/8''. Would like to find a sub that required no modification. Thanks in advance!
No modification needed with the kicker sub!
I did same thing, but sent them back bc they have the loaded in stock
Hi, thanks for sharing your videos. Question for you. is there a Rockford Fosgate or Kicker Amp that has the same options as the Keenwood 5 channel amp.?
Sure, here you go: amzn.to/44XGY3r
@@ProvoBeastAudio awesome thanks. i can use the same harnesss you used for this amp right?
amazing video and i have a question....I just had a group install a system into my 2023 taco. There is a constant buzzing noise when there is no music playing. I'm assuming you did not have any buzzing when you were done with your build. they keep blaming it on the fact that it is a factory radio. I'm calling bullshit but idk enough about it to question, hence, why i had a "professional " install it. Is there really anything that i can do? already tried a ground loup isolator. You can slightly hear a higher pitch when accelerating and when the windshield wipers are on, you can hear an amplified squeel sound. Ik its probably impossible to diagnose without actually seeing the truck, but, any ideas i may be able to look at would be a great help. The only thing thats a major difference is i have a 4 channel amp for the doors and the sub is an 8 inch sub amp combo.
Did you use an Amp with high level inputs? Or a separate converter ? What amp did you go with?
I have a 2023 taco with the original speakers and radio and I hear a buzzing noise when there’s no music playing so there’s a chance it could just be the factory radio
i have a jbl club 5501 and i need too know which two 12inch subwoofers would work best pls help
That amp does 550 Watts @ 2 ohms, so if you wanted two 12" subs, you'd want a pair that will wire to a final impedance of 2 ohms, and around 300 watts RMS each. It just depends on what vehicle, subwoofer box, etc is being used to know what sub combination would be best for your amp.
I have a 23 trd pro tacoma with the standard jbl. So there is a built in amp somewhere? What if I just want to replace all the door speakers and do nothing else, what is one of the best speakers to buy?
Quad fathers
I’m thinking about getting into installing car audio systems… I’ve installed a few radios and really enjoy that sort of stuff.
Any tips on how to start that as a career?
Reach out to me on facebook / instagram
@@ProvoBeastAudioI did on Instagram!
Thanks for the video! I installed this amp yesterday. I just have one weird thing - the sub only works if I switch the sub/ab switch to ab. If I switch it to sub it cuts the cub off completely. Any idea what could cause this?
Yes because you are not supplying the amplifier a dedicated sub input signal. Since this is a high level input consisting of only 4 channels of input, we still need to generate an input for the sub, so that switch tells the amp to pull that sub signal from the other 4 channels A/B.
@@ProvoBeastAudio thanks for the reply! Okay yeah I thought that may be the case but just wanted to make sure. Thanks!
If my new head unit has RCA jacks can I use those instead of speaker wires
Of course
I havent seen anyone ask how much something like this will cost???
Does that subwoofer slap the back of the seat when closed? Does one only use the sub when the rear seat is pulled forward?
Nope, all clears fine when seat is closed.
I wanna hear what the sub sounds like that comes with the box
Can't the Skar sub that comes with box is 1ohm. The amp isn't 1 ohm stable and would damage amp/sub.
I installed everything just like in this video but only difference is that I bought the harness for the 2016-2020 harness for my 2018 Tacoma, but the radio won’t turn on! What’s happening can someone explain me please!
What was wrong ? I have a 2019 looking to do this install next week . 😅
Did that high level input harness come with the kenwood amplifier? I didn’t see it linked in the description. Thank you.
I have the same question lol.
But i think we need to get 2 T harness connectors so we can use 1 for the amp as well
it does he says it at 6 minutes
What speakers are you using with the amp in the front and rear doors?
Videos with those speakers are linked in the description!
This is a 5 channel amp. Will it also power the tweeters in the front?
Yes
Very nice! Is there any reason why the owner went with the X802-5 as opposed to the XR901-5? Those are the two amps I’ve been looking at myself so I was super stoked to see an install with that amp, especially a new install. 👍
Budget! With speakers, amp, sub, etc, adds up quick. This amp was the right fit for the truck and budget!
@@ProvoBeastAudio ok, cool! Thanks for the response! 👍
Did everything and followed step by step,yet the sub is not powering up or responding. Any idea why?
Same same here just did this exact install
How is that sub and box compared to a JL stealthbox?
About a grand cheaper.
Is an optima battery recommended for this application?
Any healthy battery, and certainly an upgraded AGM would be beneficial. Your factory electrical, on a health battery can support this fine.
Can you please give me some info on how that subwoofer and box are making out? It is sold out but I wanna get it when it comes back in stock
You have to buy them separately. Skar doesn’t make speakers that fit in that box
All that work, my sub not coming on. On the amp there's no negative for the sub it just 2 positives on the terminals
What amp?
I'm looking for help, I talked to a lot of my local audio shops with no solution. I have a 2017 Tacoma and I copied your build in the video. My rear door speakers are still way quieter than the fronts even after having my amp tuned. Did you notice the same thing if so how did you fix it? Thank you and keep up the great videos!
That's odd. Check your balance / fader. Check your gains again on your reach channels. What speakers did you add in the rear doors?
@@ProvoBeastAudio I have kicker ks series for all door speakers
@@ProvoBeastAudio Please please respond to this thread, I know myself and many other Tacoma owners would appreciate it. I have the same kicker ks speakers as @countryboy023 and am having the same issue.
@@ProvoBeastAudio They are like from the factory, not sure why. Would be nice to know the fix (after market head unit or amp/splitter)...?
I just ran a 5 channel amp to my truck but I get a hissing sound from my speakers. Maybe it’s a terrible ground location. I’ll try to tap on to the factory ground you showed. Do you have any hissing?
Try turning your amplifier input gains down.
I have a light hiss, I ended up turning down the gains and it did the trick
That sub enclosure is sold out everywhere. Is there another box that you recommend with all the same components? Thank you in advance.
It's the season timing, but Skar allows you to preorder it and have it shipped in december if you order right through them.
I saw that thanks. One more thing is why did you use a remote wire? the amp has a auto turn on feature.@@ProvoBeastAudio
We try and apply techniques for anyone using any type of amp. Yes, the Kenwood can turn itself on, however, not ever viewer will use that exact amp.@@bbogue4
Thank you so much for the informative videos. I just put my order in for the box. I would love a video on how you tuned the amp.@@ProvoBeastAudio
Is it safe to have 1500 watts going through those stock door wires
Each channel puts out 60-75watt rms. So you’re not putting 1500watts through any one wire.
How did you tack the amp board down to the car?
Yes how??
Looks like he has a couple screws into the floor
You need a pop filter
Is the amp mount plate available?
I build them in house. If you want me to build one for you, I can. Send me a pm. If you want to do one yourself, the sheet of abs is linked in the description
how do you adjust the bass of the subwoofer without a dial
You don't, i mean you could use the bass adjustment on the radio. Outside of that, there is no easy adjustment without the knob. Kenwood sells it for $35 on amazon.
(linked in description)
Thanks, where would you install the bass knob I have the same truck@@ProvoBeastAudio
I did this same setup but my sub isn’t working. Any tips?
Need to switch the sub input selector on the amp to A/B.
@@ProvoBeastAudio thank you!!! That seemed to do the trick
I did this exact install using same parts and equipment. The amp powers on and off without remote power. The seller says it's because of the High level input was used and it's sensing that signal to turn on and off. Also the sub doesn't work. Quote from seller "The amp has signal sensing when you use the speaker level inputs. That is why the amp it turning on with out the remote wire connected. Also since you are using speaker level inputs you have to switch the input selector to AB, since you do not have a sub output connected."
I have front, rear and sub connected only difference was they sent me the marine version of this amp. HELP! LOL
What settings did you set amp to for the sub on the input selector? SUB or AB? Forgive me I'm no expert.
Found the answer down in the comments. Except for the remote power that's not needed but is connected in your video.
Anybody know how to power aftermarket doorspeakers from the same amp?
With this video? Not sure what you are asking in your question as this video is exactly that.
Thank you fornyour prompt response. Let me rephrase that. Meant if i just wanted to amplify door speakers i would just use a 4 channel amp correct@ProvoBeastAudio
@@yezkaholicwith a 5 channel amp you use 4 channels for your 4 speakers and 1 channel for your sub
@davidbell3939 thank you, still learning
I don't see the link for the parts needed for the JBL system, just has an asterisk!!
Added!
@@ProvoBeastAudio Thanks, for some reason my installer says the AMP PRO would work on the 23 as its a transition to the 24 year model ( maybe an upsell to aftermarket radio). As mine has the JBL system. I prefer to keep the HU.
I also asked PAC audio tech guys, and they weren't 100% sure that the amp pro would work on the 22-23 as they have not tested it.
It hasn't been tested yet by Pac with the newest year, but the radio hasn't changed which is why Pac won't confirm or deny if it works or not. Thats the issue you run into with a brand new model year vehicle. I don't see any reason why it wouldn't work considering nothing has changed between years. @@jiriza84641
Why to much work when you can but the add a amp kit and bypass all them little wires you had to mess with
Because I don't like to half-ass the job.