Rotary Tool Repair - Replacing the Switch (Dremel Part # 2610013852)
Vložit
- čas přidán 28. 12. 2017
- Click here for more information on this part, installation instructions and more. www.ereplacementparts.com/swit...
This particular Switch is specific to Dremel. To find a Switch specific to your model, visit www.ereplacementparts.com
If your Rotary Tool is having any of these symptoms, then replacing the Switch could solve your appliance problem.
1) Worn
2) Not turning on
OEM Part Number: 2610013852
Tools used for this repair:
• Torx drivers
• Utility knife (razor)
• Flat-blade screwdriver
• Long-nosed pliers
• Small pick
Get model-specific repair help from eReplacementParts.com. Learn how to troubleshoot, diagnose and repair your household products with customer repair stories and step-by-step repair videos. - Jak na to + styl
Got my tool in 2016. Last week, I was cutting a screw when it suddenly died. Repair the Dremel 3000 took a bit of tinkering. Took me 4 hours to get it working again. First, the stator coil wires on both of the contacts were broken. Had to unwind a full turn of wire to repair one and the other had to be joined by soldering. Next the switch thumb clip came off. Had to pry open the switch casing to push thumb clip back onto the switch. Assembly was a nightmare. Took me 6 attempts to get it right. Can't fasten the screws too tight, just enough to keep the parts in place. Finally when I turned it on, the SWEET sound of spinning rotor turned on, setting it to lowest and highest speed as it should. Everything worked out finally. No parts required to repair this time. Hope this tool could last me for another 5 years. I really love this tool for light grinding works. Polishing rust, knife sharpening, fishing hooks, drill holes and crafting works.
I took the switch apart, cleaned the contacts, bend the copper contacts a bit and saved money and time not buying a new switch. Works great.
Wish you had taken a video of that!! So my contacts look okay... Which makes me think switch. Watched this video hoping to see how to diagnose the switch. I'm not having a good go at this....
When I took the tool apart things kinda fell out... The wires connecting to my power cord aren't held in place with a circuit board... I guess it's made only for the U.S.🤷🤷 I'm not sure if I'm putting them back in the wrong place.
I think I need to tighten those "trap doors" do you know how to do that?? My wires just came out way tooo easy...
where did you buy it the switch please
Is there a way to test if a switch is good? Cause I'm getting tired of replacing parts only hopeing that it works
Yes. You can use a voltmeter. You will be checking ohms for continuity. Type in your search engine " test a 110v power switch " . You'll find lots to read or videos on it.
Thank you ive owned a dremel since the early 80s never had an issue replacing the brushes ever till today . Both sides jammed and springs pulled free. Upon going to the switch i couldnt remove the switch over the bearing then because of your instruction saw the brushes were extended in preventing it to slip off. Easy once i saw a small screwdriver inserted from the side both brushes freed and slipped out . then back to re assembly . Sometimes you just need to see the normal way to figure out the flubs. But something to add wipe out the housing while its disassembled mine had heavy red dust inside no idea from what but cleaned up easily. Why leave grit inside to cause future issues Great help thank you
Brilliant video and easy to under stand,
You sir are a god send I had to open my 3000 due to an issue an couldn't remember how the wires went to the switch it's under warranty but I opened it so it was voided no biggie called Dremel they refused to tell me seeing your video I now have it going again ty
I can not find spare parts. Is there a way to connect the electricity directly to the motor and rely on one speed only
Where can I find this switch please send me a link.
Good evening, sir, I have a question, is this switch match with the dremel multipro 275 rotatory tool model? If my english is bad, I apologize fot it, but I do not know if you speak spanish, well, thank you for your possible help and greeting from Caracas-Venezuela, have a nice day/night.
what size screws? M 1.5 and M2 don't fit
How much money does the piece basket? Is it good for Aldi's mini drill? Thanks a lot
Hi there. Where can I buy this switch please.
Thanks easy to understand.
But no sure the correct installation of wires cause it was reinstall in different way ,
Can a two speed dremel be converted to a 5 speed by replacing a two speed switch with a variable speed switch?
Nice!! Thank you!!
Do you sell replacement lock shaft pin for a Dremel Micro 8050 ?
Hi Nikki. Here's a list of replacement parts for the Dremel Micro 8050.
www.ereplacementparts.com/dremel-8050-f013805000-micro-tool-parts-c-15440_15478_459129.html
I hope you find the part you're looking for!
Did it work??
Buena noche amigos,cómo puedo adquirir este control de Dremel,por favor nesecito para mí Dremel 3000,soy de Venezuela,gracias.
En mercado libre lo compre
envían a Perú?
Wish you had covered how to tell if the switch is the problem
Weon por la rexuxa, me levente a ver la puerta quien era
Dremel 3000 se estropean cada 30 horas de uso, me he cansado de reparar, de enviar al servicio técnico, etc. No he tenido peor herramienta en mi vida.
My advise :throw it away and buy a new one.
it will happend the same and with a new one. This is the problem with this device