How to Use Every Dremel Bit
Vložit
- čas přidán 2. 06. 2024
- What are the different Dremel bits and burrs for? How do you use different Dremel bits? Hopefully in this Dremel bit guide, I’ll answer those questions. If you need different Dremel bit tutorials and demos that I didn’t get to, please comment below. I’m hoping though that this is the most complete Dremel bit guide out there to-date. Please comment below if you think I missed anything - thanks for watching!
Like what I share and want to support the channel? Get me a coffee at the link below:
ko-fi.com/logscarvingclub
Thank you!
NEW Second Channel: / @logscarvingclubplus
LINKS AND TIMESTAMPS BELOW
I get a commission if you use the links below, at NO further cost to you. Thanks!
00:00 - Intro
My Dremel: amzn.to/479etiP
My Flex Shaft: amzn.to/3GSCdgu
00:31 - Collets & Keyless Chuck
Collet Set: amzn.to/48tY7SZ
Keyless Chuck: amzn.to/3v1GDPc
01:07 - Mandrels
401: amzn.to/48rH5EO
402: amzn.to/3v1GWtk
EZ402: amzn.to/485kpKK
01:49 - Routing Bits
Routing Bits: amzn.to/3HaGnAx
02:08 - Wood Engraving Bits
Ball Engraver: amzn.to/4awN3X5
Cylinder: amzn.to/4aslttM
02:23 - Kutzall Flame Burr
Flame: amzn.to/4aqoU4j
Ball: amzn.to/3NCvZoK
Taper: amzn.to/3RyOM5z
02:49 - NEW Dremel Bits
Flame: amzn.to/471l9PS
Ball: amzn.to/48maP67
Taper: amzn.to/48rKl32
03:30 - Sanding Drums
Drum: amzn.to/3GTGOPr
Off-brand Replacements: amzn.to/472SU3b
04:13 - EZ Drum Mandrel
Drum: amzn.to/48rHGGy
04:24 - Max Life Sanding Drum
60 Grit: amzn.to/48qCVNG
04:47 - Dremel Flap Wheel
80 Grit: amzn.to/3tiP8oO
Off-Brand: amzn.to/486niej
05:17 - Sanding Disc
Old Style: amzn.to/3TyZGea
EZ Style: amzn.to/3tA2ZXE
05:51 - Thin Abrasive Wheel
Fine/Coarse: amzn.to/4ar0XK9
06:15 - Metal Cutting Discs/Wheels
402 Kit: amzn.to/3NEQTn1
EZ456: amzn.to/3tvHsiQ
Premium Metal: amzn.to/3NA460C
07:37 - Diamond Cutting Disc/Wheel
EZ Style: amzn.to/47bNymi
07:54 - Multipurpose Cutting Wheel
Max Life: amzn.to/3v9i9Ut
08:11 - Thin Cut Cutting Wheel
Thin: amzn.to/4alnmse
08:33 - Plastic Cutting Wheel
Plastic: amzn.to/3Ryp8h0
08:51 - Serrated Saw Blade
Don’t buy this didn’t you watch the video
09:06 - Wood Cutting Wheel
EZ Style: amzn.to/3GVOYqg
09:56 - Wood Shaping Disc
Disc: amzn.to/3RxpeFD
10:23 - Grinding Stones
Aluminum Oxide: amzn.to/48s2UEy
Silicon Carbide: amzn.to/4asZxyM
10:58 - Dremel Grinding Wheel
This one might be discontinued…
11:17 - Other Dremel Grinding Wheel
amzn.to/3v33Twe
11:38 - Tungsten Carbide Burrs
Single cut: amzn.to/4asmsKB
Double cut: amzn.to/3NBsYos
12:19 - Drill Bits
Set: amzn.to/3GSBDiM
12:49 - Leather Burnishing Bits
2 Pack: amzn.to/3NwQ3c8
12:54 - Polishing Pads/Buffs
402 One: amzn.to/3RvK3l4
EZ twist: amzn.to/3v9sdwG
Impregnated polishing wheel: amzn.to/3tojAhf
14:14 - Nylon Bristle Brush
Dremel: amzn.to/3RQdC1T
14:23 - Metal Brush
Different sizes: amzn.to/3RQiZhw
14:43 - Abrasive Buffs
Dremel: amzn.to/3Tzsva9
Off-brand: amzn.to/3GSnfH3
15:36 - Diamond Bits
Dremel: amzn.to/3NwPezJ
Off-brand: amzn.to/4ay8cjF
16:22 - Multipurpose Cutting Bit
One: amzn.to/3v6Geeu
16:57 - Please be careful and responsible
17:18 - RPM
17:57 - Drywall Cutting Bit
One: amzn.to/4atfIw4
18:32 - Tile Cutting Bit
One: amzn.to/3NwRzuQ
19:19 - Thanks for watching
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Kutzall Affiliate Link:
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/collections/flame...
I make these videos for people who want to do Dremel projects, Dremel arts and crafts, rotary woodworking, learn how to use Dremel accessories, find power carving ideas, et cetera, without investing in a lot of large tools. You don’t need to buy all the bits in this video to have a good time. Check out my channel for wood carving designs, Dremel hacks, power carving ideas, wood and epoxy carving, small wood carvings, and more!
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety.
of me making a magnetic bottle opener, and have a good weekend. Links for the products I used below. - Jak na to + styl
⬅⬅⬅For RPM video and changing bits/troubleshooting video🥰🥰🥰
Feel free to check out my second channel! I'd appreciate it greatly.
Excellent. Beautiful work
Thank you for being straight to the point and not spending 15 min rambling about Gloves, pets, and other bullshit like 90% of youtube hosts do.
dont be so picky man , most tutorials out there are made by normal people who is not good at shooting video and editting, be more tolerant to the quality of tutorials or you wont be happy most of the time
😂
Thank God there are others like me, so annoyed by useless content, videos can be 50 percent shorter and less time consuming if everyone is too the point
I did a little rambling for sure but thank you! I'm happy you enjoyed my video style. I'm also not a huge fan of filler when I'm trying to learn something.
@@helloguys6946I think this is an unfortunate side effect of having everything at the top of our fingers nearly instantaneously. Thank you for reminding me that a lot of this information that is available so quickly and rather freely, is brought to us from people that just have a passion and a joy of doing what they are Sharing, that they aren’t professionals, paid researchers, partnered information providers, etc. thank you for that. I am known to be impatient myself, so this is something that I need to work on my self. Appreciated!
There might be one part you don't have yet! I found it recently when someone close passed away and left a Dremel set. It contained an original Dremel mount that had LED lights embedded and doesn't use a battery, but the rotation of the shaft to power the LED's. It's genius. You place a special ring on the shaft with a magnet that's polarized in such a way that the LED housing inside coil can generate power for the LEDs like a dynamo with induction.
I've got one of those. It uses magnetic induction to power the LEDs. You're right it is genius.
That's interesting! I have a couple LM1 LED Light Attachments, but I believe those have batteries. I don't really use them just because my work station is well lit. I'm curious why I haven't seen your version with the newer models!
@@LogsCarvingClub I expect them to be discontinued. I found an Amazon listing where people complained about the LED tool addition because the magnetic ring that is used to generate the power for the LEDs sometimes came loose while working and started to heat up by friction. I haven't noticed this myself but I think that there were too many issues with it. It's called the "Dremel 677 Dremelite Rotary Tool Work Light". If you Google that, you'll find some info on it :)
@@LogsCarvingClubProbably because nowadays batteries and LED's have become so cheap. Any supplier can get you parts for a battery-operated light, but a dynamo-type system requires custom parts (and engineering). Shame that such elegant solutions are not considered cost effective anymore.
That's pretty rad, MarinusMakesStuff, thanks for sharing that! I'm definitely going to run that by my significant other..
I own just about every dremel bit imaginable.
What I use 99% of the time....whatever bit was in there from the last time...and make it work.
Fair enough! I think I change bits too often for my own good thinking one may have an edge over the others.
@@LogsCarvingClubyour logic is sound, you must be analytical aswell, hahaha.
@@APinTheAK lol
I have no need for this information (for now), but I still watched the vid in its entirety. Very nicely presented, I like your narration.
Thank you for watching anyways!
Same!
Top Video!
A tip regarding the black (brown) exploding discs that are intended for cutting and are always included. If you use two discs at the same time instead of one, you will get a wider cut, but the pieces will break much less often. Nevertheless, you should let the disc cut and not try to speed it up by applying pressure. This tip should be worth its weight in gold, especially for people with little sensitivity.
you got me scared at 8:06 when you were cutting towards yourself haha
Totally agree I should have been using a vise.
Your voice is the cure to insomnia
I'm gonna assume that's a compliment so thank you, Doctor!
@@LogsCarvingClub yes it is... from those of us who suffer from it... [tinnitus is my excuse... lol] I hope I didn't miss your...birthday, but here I am... plz make some really long videos... for ''medicinal purposes'' only lol [and btw, nothing in your video was ''boring''... too much info and too fast... is just frequencies... the tone of your voice is soothing... has even ''healing properties''... perfect to relax us to ''edgy'' for our own good...]
It is until,you real toe thumbs; then you can’t sleep again.
🤣🤣
@@LogsCarvingClub there's a certain kind of insomniac that really likes videos like these. You're well spoken, the subject matter rides a line between interesting and dry, and you don't use a bunch of vocal intonation or distracting memes. There's like 6 channels I'm subscribed to just because I need something to listen to while going to sleep, and white noise never really worked for me.
Nice Lock Picking Lawyer name drop.
Excellent explanatory video!
Thank you, Tim! I'm happy you appreciated that.
Was looking for this comment 👍
Dremel said nearly 100 years ago: We make a thing, that spins things. Great. Then they spent 100 years inventing stuff, they can spin really fast.
Spinning things real fast really was a marvelous development.
No crappy music. Just the facts. Nicely done. New subscriber.
Thanks so much! I'm happy you like the style.
I don't even own a dremel and just watched this. Pretty damn good video
Huge compliment haha. Thank you!
Thank you for this video. The 20 minutes of video time most likely took several hours of work. Your efforts are appreciated.
I'll admit this took me way longer than it should have. Thank you!
Clear, informative, succinct, thorough, no overwhelming background music, and a smattering of humor and personality - excellent video! You are appreciated.
Thank you so much! I'm happy you enjoy the style.
Agreed. Someone actually wanting to inform in place of just make a video (music background, joke images flashing on the screen, etc etc).
@@LogsCarvingClub what about all the other attachments that dremel makes such as 90 degree head and flex shaft and so on.
@@woodwizard259 Working on those currently - after work I’m usually too lazy to edit.
You said "every" and by God you meant it. Thanks.
Thank you…. For existing.
Good stuff and a no nonsense presentation.
One of the best and simplest guides on YT on this subject, which is so important to know exactly what is possible with this type of tool.
No embellishments, just the information. I congratulate you on this and hope that you continue to do good work.
Macedo Pinto
Portugal
Thank you Macedo! I appreciate your support.
The CZcams algorithm does strange things to recommend me a video like this, but I still thought it was really cool
I’m glad you clicked on it!
Amazing really struggle to find dreamel bit explanations on youtube and very few kits come with a guide thumbs up
Thank you for your support! I'm happy this was helpful.
Thanks for the info about 3rd party burs and sanding circle repair.
No problem!
thank you, I've been waiting for a video like this for a LONG time....
People making fun of your fingers are just jealous that if you ever play piano or guitar, you will shred like a pro with your reach.
I did not realize I needed this video until I watched the whole thing. Thanks for this information I’m inspired to get out my dremel and play.
Thank you for your kind words. I've actually tried to learn each, they just didn't click for me. I'd rather have a hobby that makes a massive mess haha.
Huh. A very educational video, i normally blow off videos like this that pop up because you tubes Algorithm is torturing me, but i never fast forwarded and learned something, thank you. I bough a box of this stuff at a garage sale and have only used the sand drum, i think i have that router attachment too, cool.
Thank you for watching! I appreciate your support.
This is a top 3 videos of the year entry for me- learning a ton, thank you!
Thank you!
Growing up watching kipkay, hacksmith and loads of other crafting youtubers i always thought i would use a dremel almost everyday. I havent used mine in about two years but after this video i think im going to get some new bits and use it more often
That's great to hear! I haven't heard of those channels so I'll have to check them out.
Try using it first and then buy bits based on the needs that arise. Buying tools in hopes that the tools will motivate you to start a project is a trap.
I bought it for my gourd crafts, woodworking and anything else I can find. It comes in handy for many different types of crafts!
Great! I also use it for all sorts of hobbies.
such a great in-depth overview of all the bits, i learned a lot. i also appreciate the humor! well done!
Glad it was helpful! Thank you so much!
Your tone of voice is perfect for this type of video. And your sense of humor and editing style are also perfectly suited to this content. I'm not a carver, but I do appreciate the algorithm serving this up! Wish you all the best.
That's fantastic to hear! Thank you for your support!
Those abrasive buffs are amazing for smoothing out casted resin
Interesting! How do you polish it after?
@@LogsCarvingClub I use a vibration tumbler full of 3mm ceramic beads and scratch/swirl remover. If I leave it running for a few days I can get a pretty consistent shine. Before I would hand polish using zona papers down to 30 micron which gives me a pretty good shine but it’s hell on my fingers
I love the tempo of the video and especially the witty jokes. Subbed for more :D
Vielen Dank für den Überblick über so viele Dremel Werkzeuge.
Für mich war die Abfolge der Bits etwas zu schnell. Aber es ist trotzdem mit Abstand das beste Video zu diesem Thema das ich kenne.
Vielen Dank dafür.
Thank you! Sorry about the speed, I didn’t want the video to be too long. I’ll work on it! All the best.
@@LogsCarvingClub
Für mich persönlich wäre ein längeres Video besser.
Die Länge würde mich angesichts der Vielzahl der enthaltenen Informationen nicht stören.
- Aber Menschen sind ja unterschiedlich .
@@urmelausdemeis3495 Thank you for letting me know - future videos should be less rushed. Have a nice weekend!
@@urmelausdemeis3495, use the "settings" icon (a gear) to access the playback speed adjustment. You can play the video at 50% (half) or 75% ( 3/4ths) of the original speed.
Thanks for making a video that's both a useful reference and algorithm bait. Now I've learned a thing and found a new video backlog to binge.
wasn't expecting to learn so much about dremel bits today but i guess here we are, my paper be damned
I have never heard that saying but I think I strongly relate.
very informative. owned a dremel for over 10 years and only used it when there was no other option. this opened my mind to the possibilities.
That's great to hear! It really can do a lot of different jobs, and sometimes pretty well. Thank you for watching.
Yo no lie your like a person that really watched a bunch of CZcams videos and said you guys suck watch this
This has been the best CZcams video overall like I enjoyed and laughed and learned thanks guy
I don't want any rivalries, but I'm happy you liked my video style! Thank you for your support.
@@LogsCarvingClub I like where your coming from you right now rivalries thank you 🙏🏽 for the great video tho
Appreciate the info as well as your witty commentary!
Glad you enjoyed! Thank you!
Guitar builder here, thank you for pointing out some of these cause I would've never known as someone that mostly uses a combo of CNC and hand tools.
Also, Filipino food is the best.
Guitar building sounds so tough. Thank you for watching!
Started this video thinking that when you said Dremel that you meant any rotary tool not the actual brand. The brand specific stuff I doubt I'll ever get but all the standard bits are why I started watching the video.
Thank you for watching anyways! I'm hoping this video is still helpful for other similar rotary tools.
Extremely helpful video. Thank you.
Thank you Jim!
Watched this vid once and thought... "What a great reference tool"... I haven't started yet, but I want to give a go at carvng small cobble stones... Thanks!
Thank you for watching! I'm glad this was helpful.
This was so incredibly helpful. Really generous of you to take the time to make something that could be seen as "reference" and not "content". Super, super useful for me. I really appreciate it.
I try to have a mix of both, some for referencing and some for inspiration. Thank you for watching!
This video is FANTASTIC! Finally I know what these are each designed for instead of just guessing. 😬 Thanks for making this! 👍🏼
That's fantastic to hear! Sometimes it is difficult to find information about them, especially if you don't know what they're called. Thanks for watching!
holy crap this is a useful video. this is getting saved and referenced many times thanks a ton for this dude! seriously, kudos!!
also, are you aware of any taller sanding drums? id love to find a 1 or even 1.5 inch tall drum that can be used on a dremel.
Thank you for your support! Unfortunately no, I don't know of taller sanding drums. Maybe a third party makes them? Let me know if you find any.
Great video, thanks! Definitely keeping this one aside for quick access
That's great to hear! Thank you for your support!
Feel fortunate I was able to see the original lineup of AIC when they opened for Van Halen on tour.
I don't remember mentioning AIC in this video haha.
@@LogsCarvingClub LOL! Nope you sure didn’t. That comment was supposed to be on a completely different CZcams video. So weird that it showed up on this one.
Good to have another video back from your channel! And this is a video I'm sure I'll keep coming back to when I get more bits
Great to hear! Thank you for being a regular here!
Amazing video, extremely informative. Thank you.
Thank you for being here!
very good coverage. Thank you. All the best
Thank you for your support, Rob!
Nice. Lots of great info. Thank you.
Thank you for commenting!
so many people can benefit from this video. fantastic.
Thank you for watching!
you put way more effort on that video than we deserve plus you made me laugh honestly more than one time. subscribed
Thank you so much! I'm glad you liked this.
I've been to their site and this is ssoooooooooo much better! I'm coming back to this again!
That's great! Thank you for your support. I'm happy this was helpful for you.
This video is phenomenal
I tried to use a nylon polishing wheel only once, I melted it almost instantly...
Super informative and to the point, thanks a lot!
That's interesting, I haven't had that happen to me. How were you using it?
Man, this is so helpful! I have been using the sanding drums all wrong. I think it is time to upgrade to an actual Dremel instead of my generic rotary tools.
Brilliant video...which shows i have not been making full use of my dremel....great stuff.
I need to go shopping now...
You’re a great teacher thank you
The best video I’ve ever seen about Dremel bits . I’ve had the same one for over twenty years’
I was just looking up videos to learn and i saw a different video from you and now you just uploaded 18 mins ago!!! Thats amazing lol ty
Funny! I hope it was helpful - thanks for commenting!
Happy birthday, for whenever it is/was. Your birthday present was my subscribing on the first video of yours that I watched. Best wishes!
Thank you so much! I appreciate it!
First time watching this channel and would definitely give you a thumbs up. Very nicely presented and full of information.
I'm now a subscriber.
Thank you for your support!
So much effort! this is awesome
Thank you so much!
I just got into woodworking.
I've got one of these tiny drills / carving tools, a bunch of different bits for it and a lot of other tools as well that I just received from my father, since he likes working with metal more than wood. I've been trying to figure out some simple and easy projects to get started with and your channel has provided me with a lot of ideas and concepts for possible projects I might do.
Thank you! Keep the awesome videos
coming! +1 subscriber!
Thank you! It's a nice hobby to have.
Love this stuff. I gotta make some timestamps for all the bits that are good for wood carving.
Thank you! I also have a video on carving bits from a while ago.
@@LogsCarvingClub I saw that just recently. its very helpful.
Thanks for making this video
Thank you for watching this video!
Excellent video. I needed this.
I'm happy this was helpful! Thank you for commenting.
Outstanding video sir! I have some of these objects and wasn’t quite sure what their proper use was!
I'm happy this was helpful! Thank you for watching.
That's quite the extensive list! So sure, have a sub and thanks for putting all the effort in!
Thanks for the sub!
Great video! Thanks for it!
Thank you! Useful information!
Didn't know i wanted this video
I'm glad you found it!
you definitely don't waste your time [or ours] mate!... too much info, too fast, without losing your sense of humor... nice!
Definitely struggled to fit this into a reasonable amount of time, may have rushed it!
@@LogsCarvingClub Nah it wasn't too fast, I just had to make sure I wasn't distracted by anything else when watching, and skip back a couple of times :)
This was a fun experiment
I think you're the first to mention that!
Don't take this the wrong way please. Great video. I have several dremels and they do have a place. That being said, there is nothing the proper tool can't do faster or better. The cost of the bits alone can buy a much nicer purpose built tool.
I absolutely agree to an extent, but for people like me, a Dremel is a great start. For example, I don't need to buy a whole band saw when I can just spend a little extra time roughing out a carving with the 561. My projects would be much easier to do and faster if I had a workshop packed with big tools, but I don't need them. I think the Dremel (and other rotary tools) makes some hobbies much more accessible for people with limited space or budgets.
Bro had me cracking up while watching dremel bits
When's Netflix gonna give me a special?
Thanks for the effort you put into this, so many of these attachments are suck it and see and they just don't perform how one would expect.
This post is a super time saver, thanks so much for sharing your expertise.
Thank you for watching!
Thank you for this!
Awesome job, keep it ip!
Thank you! I’ll try!
This video deserves way more likes!
Thank you! I appreciate that.
Great overview, thanks!
Thank you for watching!
Thanks for an excellent video chief!
great video. ive always wondered what they all did.
I'm glad this was helpful! Thank you!
Great video!
Thank you!
Thanks. A lot of good info. Cheers.
Thanks for the demos.
No problem! Thanks for commenting.
Loved this whole video, came to comment, I hope you get 30,000. I'm +1
Keep this shit up. You're making amazing content
Thank you for your support!
Happy 😃 birthday 🎂
Thank you!!
Had this recommended while watching tool vids, figured eh, why not? I was mildly surprised! Had lots of good info and I like the little jokes sprinkled in :]
I’m glad you liked those! Makes it more fun for me to write. Thanks for watching!
10/10 would watch again
After editing this I'm sick of watching it haha
This is a great video. Thanks for making it. I have a Dremel Tool and nearly every add-on, but I've never known what all the bits are for.
Awesome mate.
Thank you!
Awesome video!
Thank you!
Neat, I always wondered what some of those "mystery bits" were. And here I am with a Dremel that's old enough that it was made in Racine Wisconsin. (Dunno if the new ones off-shored, but I figured if they may have.)
I'm glad this video was helpful! I think they're made in Mexico now.
This video showed up in my feed and got my attention. Very helpful guide, thorough but to the point. I watched a couple of your other videos and subscribed. I would love to see you demonstrate some of the metal bits the way you have with the wood bits. Your wonderful woodworking videos do a great job of showing how and when to use them.
I definitely work with wood more than with metal, because I enjoy wood carving in my spare time, but I'll try and get some more metal-focused videos out. Thank you for your support!
This video is exactly what I needed to finish up a current project. Bless up
Great to hear! What are you working on?
😮 B R A V O 😮 Well done...
Thank you!
thanks this was super helpful! subbed. happy birthday!
Awesome!
Awesome vid, Thanks!
Thanks for commenting!