Do you know how to set up your Tilton bearing?
Vložit
- čas přidán 24. 01. 2017
- Thorough instructions on how to set up your Tilton Hydraulic Release Bearing. Watch Craig explain step by step how to go through this process of setting up your Tilton hydraulic release bearing for your tremec manual transmission. For more details go to www.bowlertransmissions.com or give us a call 618-943-4856
Instagram: / bowlertransmissions
Facebook: / bowlerperformance
Website: www.bowlertransmissions.com/ - Auta a dopravní prostředky
Using the same straight edge (or one with the same thickness) is key. Also, it DOES matter which line has the bleeder - it should be the one that exits the HRB at the highest point, so that the air can rise from that port in the HRB out to the bleeder.
Do we subtract for the straight edge thickness since we’re dealing with thousands of an inch?? 🤔
Yes we recommend that you zero your calipers after the thickness of your straight edge.
Have you used this setup on a t5 foxbody?
@Craig Meyer definitely will! Thanks!
Will that work with a Bobot.adapter with the Ar5
@Craig Meyer thank you for your reply