I have the same engine. I also removed all the markings on it. It looks great solid black! They are just stickers you can peel off. Engine pushes my 12 ft. aluminum boat real nice.
I just received mine today I plan on breaking it in tomorrow, I bought Lucas marine grease and a grease gun and filled the grease plugs full of grease and popped off the propeller and greased the shaft all I have to do now is add the gear oil and run it..
I have been meaning to post an updated video. I used it for two summers now. Runs pretty good, but the rubber components are absolute trash, falling apart and staining skin. I am also seeing some minor rust issues. I would not trust running this item in saltwater. I hope you have a good experience!
I have a 6hp one. Did you do the rest of the break-in in the lake? I tried to follow the instruction of breaking in slowly at home, however, when 50% throttle was applied, all the water gushed out of the trash can. I ended up doing an hour of 25% throttle, then took it out to the lake to do the rest. But, it's brutal to run 50% throttle for 2 hours followed up by 80% throttle for 3 hours! I want to fish not running around the lake in the loud engine. Am I breaking-in my hearing or the motor???
I wonder if you noticed the transom clamp is not manufactured at 90 degrees. I do not understand this. Any ideas? What happened to the Hangkai logos on the engine cover?
I cannot say why the transom clamp was designed that way. However, I can say that it does not pose a problem. I removed the decals (easily removable stickers) in order to help deter theft of this highly sought after gem of marine power.
Can you tell me what fuel plug did you use for the external tank. I can't seem to find one that fits correctly to the motor. I've tried so many and they don't snap in place properly. Would love your feedback. I have the 6hp 2 stroke
Glad it is working out for you! Ethanol attracts water, which can cause problems. So either using all the fuel quickly or stabilizing the fuel with an additive to deal with the moisture is recommended when using ethanol. I prefer just using the premium gas, which around me does not contain ethanol. (a product like this czcams.com/video/cHNe9Aok6MQ/video.html )
@@mikeford7870 I know that ethanol can attract water, but a Swedish CZcamsr have done a test about that, he let the ethanol sit in the tank for a couple of months and when he tested the fuel, no water was in there
That’s great! I wish I would’ve bought one a couple weeks ago when they were still available they’re all out of stock now he’s like a great little motor will be perfect for me when I get one thank you for the video.
I only ran it for a short time like this out of gear. The rest of the break-in period was done while using it in gear. I have had the rubber handles degrade quickly. Otherwise, it still runs great!
I have an updated video that shows the rubber disintegrating. The engine still runs good. I see some rust and have only run it in freshwater. Salt water would probably kill this engine fast
It is put away for winter, but this outboard has been running fantastic! No complaints, really. We are well powered now and so dang light! I would buy again.
These are actually very good engines!! Just keep them clean and serviced and they will last a long time!!!
The metal seems cheap. I'm seeing some rust and I've only used it in freshwater. I do believe salt water would kill this engine pretty fast
I am very satisfy with my hangkai12hp and did some upgrades to her. I have some videos in my channel.
Hahaha I love the fact you removed Hangkai 2 stroke decals from the cowling :)
I have the same engine. I also removed all the markings on it. It looks great solid black! They are just stickers you can peel off. Engine pushes my 12 ft. aluminum boat real nice.
@dannyrusso8279 hows the engine holding up? Any updates?
The first 10 hours 25:1 fuel oil mixture? A lot of hours with a lot of smoke.
I just received mine today I plan on breaking it in tomorrow, I bought Lucas marine grease and a grease gun and filled the grease plugs full of grease and popped off the propeller and greased the shaft all I have to do now is add the gear oil and run it..
I have been meaning to post an updated video. I used it for two summers now. Runs pretty good, but the rubber components are absolute trash, falling apart and staining skin. I am also seeing some minor rust issues. I would not trust running this item in saltwater. I hope you have a good experience!
Thanks for the video.
I have a 6hp one. Did you do the rest of the break-in in the lake? I tried to follow the instruction of breaking in slowly at home, however, when 50% throttle was applied, all the water gushed out of the trash can. I ended up doing an hour of 25% throttle, then took it out to the lake to do the rest. But, it's brutal to run 50% throttle for 2 hours followed up by 80% throttle for 3 hours! I want to fish not running around the lake in the loud engine. Am I breaking-in my hearing or the motor???
I think the main point is to not run it wide open brand new. Some people do that anyway have had no issues, at least right away.
I wonder if you noticed the transom clamp is not manufactured at 90 degrees. I do not understand this. Any ideas? What happened to the Hangkai logos on the engine cover?
I cannot say why the transom clamp was designed that way. However, I can say that it does not pose a problem. I removed the decals (easily removable stickers) in order to help deter theft of this highly sought after gem of marine power.
How’s it holding up?
Can you tell me what fuel plug did you use for the external tank. I can't seem to find one that fits correctly to the motor. I've tried so many and they don't snap in place properly. Would love your feedback. I have the 6hp 2 stroke
My engine, fuel line, and fuel tank came as a set. I purchased off of Amazon.
I have no problems with ethanol, so I think that you can use it to
Glad it is working out for you! Ethanol attracts water, which can cause problems. So either using all the fuel quickly or stabilizing the fuel with an additive to deal with the moisture is recommended when using ethanol. I prefer just using the premium gas, which around me does not contain ethanol. (a product like this czcams.com/video/cHNe9Aok6MQ/video.html )
@@mikeford7870 I know that ethanol can attract water, but a Swedish CZcamsr have done a test about that, he let the ethanol sit in the tank for a couple of months and when he tested the fuel, no water was in there
That’s great! I wish I would’ve bought one a couple weeks ago when they were still available they’re all out of stock now he’s like a great little motor will be perfect for me when I get one thank you for the video.
Where you guys buy them at?
@@ElVeteran44 I haven't got this outboard but I have overall no problem with ethanol content in the gasoline
My manual (4 stroke 8) said it does need to be in gear for breakin period does the 2 stroke not?
I only ran it for a short time like this out of gear. The rest of the break-in period was done while using it in gear. I have had the rubber handles degrade quickly. Otherwise, it still runs great!
Are these engines worth it or do they start having problems?
I have an updated video that shows the rubber disintegrating. The engine still runs good. I see some rust and have only run it in freshwater. Salt water would probably kill this engine fast
Avoid saltwater and only use gasoline that does not have ethanol, usually premium blends do not.
Is the total break in period 2hrs ?
Any update on this motor? How's she running?
I have had the rubber handles degrade quickly. Otherwise, it still runs great!
Where can you get parts for the Hangkai 12hp?
I have never looked, but I would not be surprised if parts are hard to find. I bet a lot of tohatsu parts would fit.
How many weight for macine.
About 58 lbs (26.3 kg) - light!
@@mikeford7870 Thank you🙏
Where did you get the stand?
II made it using 2x4s cut to size and sawhorse brackets
@@mikeford7870Outboard stands are overpriced. This is a very smart design. Thank you very much for sharing the idea!
Where you buy yours at?
Amazon
What's the weight?
59/68 lbs
I believe it is 34kg
How she running?
It is put away for winter, but this outboard has been running fantastic! No complaints, really. We are well powered now and so dang light! I would buy again.
I have one too. Going to my second season with it. I was worried about parts but apparently you can use Tohatsu parts.