- 31
- 77 164
Mike Ford
Registrace 24. 10. 2011
Diving down to work on the pennant line for Indigo, our 17ft SunCat.
I used the Blu3 Nemo to get underwater. That thing rocks! I was also able to cut off a shackle that was jamming on the center board case. Good stuff!!!
zhlédnutí: 8
Video
Drysuit paddleboarding in early Feb in Upper Michigan 2024 (crazy warm weather for this season)
zhlédnutí 20Před 5 měsíci
Drysuit paddleboarding in early Feb in Upper Michigan 2024 (crazy warm weather for this season) I highly recommend an inflatable paddleboard with electric pump (Amazon, etc) They are crazy cheap and convenient ($100-300 range). They do not paddle as well as hard paddleboards, but the trade-offs are well worth it for the average family.
Solo Mesa XL with heat deflector - wood pellets
zhlédnutí 9KPřed 5 měsíci
winter 2024, playing with a Mesa XL solo stove with heat deflector. I am burning wood pellets this burn. Having the heat without the smoke is pretty great. The use of the heat deflector is quite noticeable. Just using pellets is perfect for having a 30-50 minute fire. You can add more pellets and enjoy the fire longer, you just need to add rather slowly as to not snuff the fire out too much and...
Shoulder Mount Virb Elite CT200U Minibike
zhlédnutí 50Před 5 měsíci
Testing out shoulder mount for Virb Elite
6-inch hand chainsaw. I feel like a bionic man with this thing!
zhlédnutí 27Před 5 měsíci
clearing very small brush (not pictured) is a breeze as you can hold the stem taught and cut with one hand. I feel powerful!!!
6 inch electric hand chainsaw from Amazon - Cheap - works pretty good! Brand LICORNE
zhlédnutí 111Před 6 měsíci
I am not using oil on purpose, as IMHO it does not need it on such a small unit and it will keep it cleaner when stored. From my research, oil is used on chainsaws so that the chain does not get too hot. I am simply not worried about, but I will update here if I end up changing my mind. Overall - good buy. Pretty dangerous tool, so watch those fingys! Product: www.amazon.com/dp/B0C2ZHM6PZ?psc=1...
14x16 wall tent with floor made from pallets and 1/2in OSB
zhlédnutí 908Před 7 měsíci
I am not builder, but I left this up for over a year and so far, it is holding up like a champ!
Hangkai 12HP Outboard - rubber bad-otherwise runs great second year in
zhlédnutí 1,7KPřed 7 měsíci
Pretty happy with this outboard, mainly due to it being light for the power provided. 12HP? Hmm. Maybe as much power as a 9.9. It gets me up on plane - good enough!
Nov 1st sailing in a Drascombe Longboat 2022
zhlédnutí 511Před 7 měsíci
Nov 1st sailing in a Drascombe Longboat 2022
Hangkai 12hp outboard - Initial break in period - up on plane!
zhlédnutí 28KPřed 2 lety
Hangkai 12hp outboard - Initial break in period - up on plane!
unboxing new 12hp short shaft outboard from Hangkai
zhlédnutí 929Před 2 lety
unboxing new 12hp short shaft outboard from Hangkai
Boating to Washington Island with cousins
zhlédnutí 45Před 3 lety
Boating to Washington Island with cousins
Ct200u improved throttle return spring
zhlédnutí 10KPřed 6 lety
Ct200u improved throttle return spring
WEN 40-Volt Max Lithium Ion 16 in. Brushless Chainsaw w/ 4Ah Battery and Charger (Model # 40417)
zhlédnutí 5KPřed 6 lety
WEN 40-Volt Max Lithium Ion 16 in. Brushless Chainsaw w/ 4Ah Battery and Charger (Model # 40417)
Seat Springs version 2 Coleman mini bike ct200u
zhlédnutí 19KPřed 6 lety
Seat Springs version 2 Coleman mini bike ct200u
2017 04 23 hiking stonington peninsula
zhlédnutí 121Před 7 lety
2017 04 23 hiking stonington peninsula
Coleman CT200U mini bike, virb elite, chin mount
zhlédnutí 1,4KPřed 7 lety
Coleman CT200U mini bike, virb elite, chin mount
explained it perfectly, part is on the way and i’m stoked to finally have an easier throttle. edit: i’ve had it on for about a week and a half, it’s felt much better and i’m stoked to not have to deal with that shitty stock coleman spring anymore
Very cool. Nice to get the centerboard fixed.
In Beavis voice “ played around with his unit 😂
Such a beautiful spot.
How many weight for macine.
About 58 lbs (26.3 kg) - light!
@@mikeford7870 Thank you🙏
Yeah those pallets will rot sitting on the ground. Next time place pallets on well placed cinder blocks for a more permanent setup.
Thanks! I'll give that a shot if I ever do have an issue. So far, so good. I do have sandy soil and maybe that good drainage makes a difference. We shall see!
What happened to the Hangkai logo?
I wonder if you noticed the transom clamp is not manufactured at 90 degrees. I do not understand this. Any ideas? What happened to the Hangkai logos on the engine cover?
I cannot say why the transom clamp was designed that way. However, I can say that it does not pose a problem. I removed the decals (easily removable stickers) in order to help deter theft of this highly sought after gem of marine power.
We have a Mesa XL on our RV for smoke "less" fires and some ambience at happy hour. We use hardwood pellets, which burn a bit cleaner and hotter than the much cheaper softwood pellets. Alcohol hand sanitizer gel makes a great pellet starter. I was contemplating adding the heat diffuser, but from your video I see it greatly expands the storage space requirements, which would be a no-go for our little RV. Presumably you could disassemble the diffuser, but that could be annoying and messy if it's coated with soot.
Beautiful video. I really liked the camera angles of the landscape and fog as well as the sailboarder. Great job
Hey Mike,j ust got my Mesa XL with the heat deflector. I seem to have a decent amount of smoke with the deflector on it. None with it off. Did you have to burn yours in several times before it stopped smoking or did yours not smoke from the start?
What are you burning? I have only burned pellets so far. The instructions state that the flame should not be touching the bottom of the deflector, as it impacts performance. I have found this hard to achieve and the bottom gets a lot of soot on it as a result. However, I have not had any issue with smoke when burning pellets. I suspects burning sticks will contain more moisture and will smoke more. It does seem a bit odd that it would smoke more with the deflector on. With or without, both use a top ring that helps pull in preheated air, which helps burn the fuel entirely, eliminating smoke (in most cases, anyway)
I think this convinced me. Do you think with the heat deflector you could sit multiple people around it in the spring time? I'm thinking of places that a big firepit would probably be told no, but something like this could probably be alright.
Yes, especially with no wind.
@mikeford7870 perfect. Sounds like a way I can grill a couple hot dogs and marshmallows on a cool spring night. I will say I like the look of the Mesa XL a lot more than the Ozark. That colored coating looks good. Thanks for the response.
Where did you get the crosspieces shown at the very end?
We got them on Amazon. I think they were like $14
Thanks! @@mikeford7870
Thanks for the info. Wouldn't stop me from buying it.
Cool
Are these engines worth it or do they start having problems?
I have an updated video that shows the rubber disintegrating. The engine still runs good. I see some rust and have only run it in freshwater. Salt water would probably kill this engine fast
Avoid saltwater and only use gasoline that does not have ethanol, usually premium blends do not.
Keep going!
Great video
Where did you get the stand?
II made it using 2x4s cut to size and sawhorse brackets
@@mikeford7870Outboard stands are overpriced. This is a very smart design. Thank you very much for sharing the idea!
My manual (4 stroke 8) said it does need to be in gear for breakin period does the 2 stroke not?
I only ran it for a short time like this out of gear. The rest of the break-in period was done while using it in gear. I have had the rubber handles degrade quickly. Otherwise, it still runs great!
First to see you crash
Where did u get the springs
Is that a short shaft im gona by one off Amazon but theres no option for short shaft or long shaft
I just received mine today I plan on breaking it in tomorrow, I bought Lucas marine grease and a grease gun and filled the grease plugs full of grease and popped off the propeller and greased the shaft all I have to do now is add the gear oil and run it..
I have been meaning to post an updated video. I used it for two summers now. Runs pretty good, but the rubber components are absolute trash, falling apart and staining skin. I am also seeing some minor rust issues. I would not trust running this item in saltwater. I hope you have a good experience!
Very nice video. I enjoyed watching you and your family. Having fun with number five.
Thanks for the video.
Is the total break in period 2hrs ?
These are actually very good engines!! Just keep them clean and serviced and they will last a long time!!!
The metal seems cheap. I'm seeing some rust and I've only used it in freshwater. I do believe salt water would kill this engine pretty fast
Where can you get parts for the Hangkai 12hp?
I have never looked, but I would not be surprised if parts are hard to find. I bet a lot of tohatsu parts would fit.
Can you tell me what fuel plug did you use for the external tank. I can't seem to find one that fits correctly to the motor. I've tried so many and they don't snap in place properly. Would love your feedback. I have the 6hp 2 stroke
My engine, fuel line, and fuel tank came as a set. I purchased off of Amazon.
The first 10 hours 25:1 fuel oil mixture? A lot of hours with a lot of smoke.
Any update on this motor? How's she running?
I have had the rubber handles degrade quickly. Otherwise, it still runs great!
How about your new Hangkai 12?
Haha! That was actually purchased at the end of this past season. So, it was not in my hands on this trip. Hope to get it out soon! Ice just left the lake
@@mikeford7870 I have the same Chinese outboard motor, but produced by the Parsun brand. I use it on a 14 foot cathedral hull boat.
How has your motor treated you? I'm thinking of getting one when they're back in stock
How she running?
It is put away for winter, but this outboard has been running fantastic! No complaints, really. We are well powered now and so dang light! I would buy again.
I have one too. Going to my second season with it. I was worried about parts but apparently you can use Tohatsu parts.
Where you buy yours at?
Amazon
I have a 6hp one. Did you do the rest of the break-in in the lake? I tried to follow the instruction of breaking in slowly at home, however, when 50% throttle was applied, all the water gushed out of the trash can. I ended up doing an hour of 25% throttle, then took it out to the lake to do the rest. But, it's brutal to run 50% throttle for 2 hours followed up by 80% throttle for 3 hours! I want to fish not running around the lake in the loud engine. Am I breaking-in my hearing or the motor???
I think the main point is to not run it wide open brand new. Some people do that anyway have had no issues, at least right away.
What's the weight?
59/68 lbs
I believe it is 34kg
I am very satisfy with my hangkai12hp and did some upgrades to her. I have some videos in my channel.
Hahaha I love the fact you removed Hangkai 2 stroke decals from the cowling :)
I have the same engine. I also removed all the markings on it. It looks great solid black! They are just stickers you can peel off. Engine pushes my 12 ft. aluminum boat real nice.
@dannyrusso8279 hows the engine holding up? Any updates?
I have no problems with ethanol, so I think that you can use it to
Glad it is working out for you! Ethanol attracts water, which can cause problems. So either using all the fuel quickly or stabilizing the fuel with an additive to deal with the moisture is recommended when using ethanol. I prefer just using the premium gas, which around me does not contain ethanol. (a product like this czcams.com/video/cHNe9Aok6MQ/video.html )
@@mikeford7870 I know that ethanol can attract water, but a Swedish CZcamsr have done a test about that, he let the ethanol sit in the tank for a couple of months and when he tested the fuel, no water was in there
That’s great! I wish I would’ve bought one a couple weeks ago when they were still available they’re all out of stock now he’s like a great little motor will be perfect for me when I get one thank you for the video.
Where you guys buy them at?
@@ElVeteran44 I haven't got this outboard but I have overall no problem with ethanol content in the gasoline
Great video
Excellent info- just curious when I remove the stock spring will I have to make sure that I don’t loosen the throttle cable when I turn that screw to get it off? Does that make sense? I’m new to engines.
Dude! Loving that spring seat. How’s you manage that???
Honda 16592-ZE1-810 SPRING, CABLE RETURN That is the part number for that small return spring. Snagged it off eBay for around $5
Nice video what size of screw did u use to attach the toe buttom frame and how did u secure d spring?ty
You forgot the part number my friend, but with me it is the exact opposite. I upgraded my 4.0 engine on my Manco Thunderbird to a 212cc predator and I have the 60 tooth sprocket and just finished the stage one performance upgrade today, BUT my throttle will not return all the way. Why? They took out the return spring that you just pointed to so it won't return all the way. Result: I have two broken ribs as the throttle stuck and this is un-Godly power. It shot me off the back and beings the only brake I have is a foot brake I was in trouble. It was my 1st test and after starting it seemed ok, but once I opened it up it was like a fire breathing dragon. I am 71 and have 4 other mini's. This one is going up for sale or trade. The extra pull on the throttle is well worth it as this is a big safety issue. Especially on the older Manco's with a scrub brake. Whomever buys it I do have another brand new scrub pad that can be bolted on or welded and it will give double stopping power to the rear wheel, but with this kind of power you need hand controlled brakes. My email if anyone is interested: SnuffyLL96@gmail.com. I will also post it on Offerup.com and Letgo.com and San Antonio Craigs list.
Where can I get that wooden base
You can get a plank of wood from a home improvement store. Cut it and sand it. Call it a day!
Man, from a tree !
Great build. Good video with good instructions.
i dont really understand the chain brake for a electric chainsaw as the saw immediately stops when you cut off the power. A gas chainsaw does not and that's why the brake is needed. My only reasoning for the brake for electric is for people who are accustomed to both types of saws. it's good practice to engage the brake as you may forget what type of saw you are currently operating.
@Michael Myers i know how to use them. I am stating that a gas and electric chainsaws are different when stopping. My gas saw chain still travels when i cut the gas. My electric (battery) saw stops immediately. So there is no point in a brake for electric from my experience. So i am saying having a hand brake is really aesthetic for electruc but may be a good idea for safety when going from electric to gas.
@Michael Myers When i was young and this is based on a gas saw. I was instructed when cutting limbs, the saw would pass through the timber and naturally move towards the operator while the chain is still spinning. So I let off the gas and applied the brake once the limb was cut. I have never heard of falling safety theory. Well you learn something new.