I Bought A Supercharged Ford Bronco - Lets Take A Look - Part 1

Sdílet
Vložit
  • čas přidán 8. 07. 2024
  • ‪@BroncosandPartsGarage‬
    I’ve recently purchased a 1995 Ford Bronco Eddie Bauer 5.8L equipped with a Paxton Supercharger. Please enjoy this walk around video covering some of the issues with purchasing a 27 year old vehicle. We will make a multi-part video series showing the tuning, repairs and a DYNO session to see what type of power the supercharger creates. Please follow along!!! #bronco #supercharged #supercharger
    PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
    PayPal: n2kpi@yahoo.com
    Venmo: @broncosandparts
    Cashapp: $broncosandparts
    It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks. Thanks!!
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Please Like and Subscribe.
    Follow along on:
    / broncosandparts
    @broncos.and.parts.Garage on Instagram
    Email : n2kpi@yahoo.com
    We sell used Ford Bronco and Truck Parts
    ---------------
    If you've enjoyed the content and feel like supporting the channel, it won't cost you a cent, as you can simply just donate some of your time by allowing the ads to play through. Doing this will help out a lot and that’s how I make a tiny bit of revenue. More revenue means more How To Videos!! 👊🏻😄....... Please don’t ever feel as though you need to watch the ads if you don’t want to. Simply skip them and move on to the video- it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻 Thanks again for your support!!
    --------------
    ****Reference Videos****
    Ford Bronco Top Removal and Hardware Upgrade | Daily Driven Broncos EP 9
    • Ford Bronco Top Remova...
    How To Install and Repair Door Felts (Sweeps) & Window Channel Seals - Ford Bronco OBS Ford Trucks
    • How To Install and Rep...
    ****TOOL & EQUIPMENT LINKS****
    New Milwaukee 2352-20 M18 3 Led Design Stick Work Light Pivots Cordless Sale
    amzn.to/3xcjarU
    ************************************
    MilwaukeeTool 2846 50 M18 18 Volt 175 Watt Lithium Ion Powered Compact Inverter with 5.0 Ah Battery
    amzn.to/3MM289Y
    Video Filmed With:
    GoPro HERO9 Black - Waterproof Action Camera with Front LCD and Touch Rear Screens, 5K Ultra HD Video, 20MP Photos, 1080p Live Streaming, Webcam, Stabilization
    amzn.to/3rucwuA
  • Auta a dopravní prostředky

Komentáře • 76

  • @joshcummings6642
    @joshcummings6642 Před 2 lety +1

    This is beyond awesome. Subscribed

  • @troyt6006
    @troyt6006 Před rokem +3

    michigan man here and yes the rust is horrable.. looking at a 1980 bronco now... and where can i get one of those superchargers.. i looked for them online... didnt see eactly same one.. more like turbos.. . looking for gt 40 upper and lowers and gt40 heads to go on 96 f150.. need more power.... lmk ill subscribe. just cause ur a michigan man .. DETROIT

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před rokem

      Sadly, Stopped making them 20+ years ago. The bracket is the $$ part. Head units are easy to find. I sell the GT40 upper and lowers. $165 plus ship. Your stock truck intake flow is good for 350hp. Going with gt40 (explorer intake) really ads problems as throttle body is moved and single v twin. Good luck either way

  • @betotrokas
    @betotrokas Před 2 lety +1

    Sweet project!!!

  • @jeffnkaylee
    @jeffnkaylee Před 2 lety +1

    Congrats Chris, Looks nice I'll have to check it out

  • @FSBroRaptorBurban
    @FSBroRaptorBurban Před 6 měsíci +1

    Sick!

  • @fordmuscleluis9710
    @fordmuscleluis9710 Před 7 měsíci +1

    Wow that supercharger sounds phenomenal

  • @crazycaseyscustoms
    @crazycaseyscustoms Před 2 lety +4

    The fuel regulator is a boost referenced fuel pressure regulator. Paxton, Vortech, and Kenne Belle all used a similar system. Basic but functional. I would assume a MAF conversion would make a HUGE difference. Great channel!

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 2 lety +1

      Thank you. I been digging thru the web gathering info on it. I’ll switch to maf. I have the harnesses. Thx

  • @YammiePro
    @YammiePro Před 2 lety +1

    Very nice! That top just wants to come off one more time!

  • @eleftherios7398
    @eleftherios7398 Před 2 lety +1

    Subscribed!

  • @stephenfranco964
    @stephenfranco964 Před 7 měsíci +1

    Those doors still sound good when you shut em. Sounds tight.

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 7 měsíci

      The truck has typical body rust but is solid. We restored the frame and lifted it.

  • @poorbronco
    @poorbronco Před 2 lety +1

    My daughter's 96 came with that style air intake.

  • @bobbywren123
    @bobbywren123 Před rokem +1

    I need that on my 95 SWB 2wd

  • @benreifhardt4471
    @benreifhardt4471 Před 5 měsíci +1

    Fun fact the 4.9 straight 6 has that cold air inlet too.

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 5 měsíci

      Yup. We had a full video on those Oem cai. This needed it due to SC bracket!!

  • @justfloat1
    @justfloat1 Před rokem

    Ill take you CB, mine has been removed, i would love to add it back for my 1996 F-250 Diesel 🤷🏻‍♂️

  • @carlofernandez9506
    @carlofernandez9506 Před 2 lety +1

    I want one so bad😭

  • @jordysund9986
    @jordysund9986 Před 2 lety +1

    i looked at the same bronco

  • @T04E
    @T04E Před 2 lety +3

    Nice truck... I have the same rear driveshaft, it's been decent.
    How much boost is she running?

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 2 lety

      Thank. Total brain fart on the drive shaft. Lol. It’s common. Gauge isn’t showing any boost. Will replace it this week.

  • @videocre1
    @videocre1 Před 2 lety +1

    Can anyone confirm if the splitting at the rain guards/run channels above the doors is what leads to water leaking into the cab through the rear ashtrays?

  • @justfloat1
    @justfloat1 Před rokem

    Please replace them headlights, using glass if possible 🤪👌

  • @felixrican86
    @felixrican86 Před 2 měsíci +1

    Hey brother, I'm looking for a Paxton kit now for my 5.0. How many pounds of boost are you running through this? Is this running on 91/93 octane? And is the fueling done via FMU? Thanks for any info...

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 2 měsíci

      Max you can really get is 5lbs. It’s clutch based. They slip. Belts slip. This is on my 351 with alum heads. On a 305 maybe slightly better. Call Paradise Wheels. They sell the parts.

  • @johnmcdougald1238
    @johnmcdougald1238 Před rokem +1

    Sounds fun, until you realize you're now only getting 2mpg. I really wish they'd made a serious one for the 300 to go into my 92 4.9L. I could only imagine the extra torque it would make with just a little boost. Also, any chance of throwing out some pointers on removing the ECM? Mine burned out and the bolt holding the firewall wire harness in just spins inside the case.

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před rokem

      Actually still get 12-16 when my not beating in it. They make a fantastic turbo kit for the 300 4.9. It’s on our project list. Very easy to get to 350hp with cam, offy intake and heads/exhaust. Great platform

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před rokem

      Pull ur kick panel and ebrake out of the way, pry down ur fender liner and tap it out

  • @judsonthurgood5203
    @judsonthurgood5203 Před 2 lety +1

    Are you gonna do some rust repair DIY? I've got the same rust spots.

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 2 lety +2

      We are going to fix all the suspension and mechanical so we can thrash on this, this summer. In the fall, we will address the rust.

    • @judsonthurgood5203
      @judsonthurgood5203 Před 2 lety +1

      @@BroncosandPartsGarage Sick! Cause I'm stuck between just repairing the rust with a new wheel well or bondo repair or just replacing the whole 1/4 fender.

  • @yordimora7038
    @yordimora7038 Před rokem +1

    Second part?

  • @FSBroRaptorBurban
    @FSBroRaptorBurban Před 6 měsíci +1

    Do you sell instrument bezels?

  • @ballz6211
    @ballz6211 Před rokem +1

    Wish I didn’t have this 302 in my 95

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před rokem +1

      They are great motors. Tons of aftermarket. And only about 15 hp less and 25 foot pounds less torque than the bigger V-8

    • @ballz6211
      @ballz6211 Před rokem

      @@BroncosandPartsGarage do you have any experience with the rampage soft top?

  • @parkerlovell1675
    @parkerlovell1675 Před 2 lety +1

    I want to run some type of boost in my bronco but i daily it :(

  • @user-pc1oe2kw7k
    @user-pc1oe2kw7k Před 8 měsíci +1

    Is this a paxton SN93??

  • @anthonykujawa4654
    @anthonykujawa4654 Před 10 měsíci +1

    How often do you go to US AUTO in sterling heights?

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 10 měsíci

      Not to often.

    • @anthonykujawa4654
      @anthonykujawa4654 Před 10 měsíci

      @@BroncosandPartsGarage I stumbled across this page looking for the other video for when you replaced cab bushings. Haven't been able to locate it yet. Just wondered if you made it yet. I also see you on marketplace. Looks like you've got a lot of cool stuff.

  • @FSBroRaptorBurban
    @FSBroRaptorBurban Před 6 měsíci +1

    How can I buy a bezel? Website? I don’t do Facebook

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 6 měsíci

      Email me. It’s in the video description. Click on title. Click more. Then scroll down.

  • @FK-Jaja
    @FK-Jaja Před rokem +1

    this model has airbags?

  • @jacksonharris7490
    @jacksonharris7490 Před rokem +2

    I have a 96 that I want to restore.... any suggestions?

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před rokem +1

      Make a solid plan. Stock to one issue at a time. Don’t tear anything apart you cannot reassemble within a day or two. I sell used parts. Jeffs Bronco Graveyard sells new.

    • @QUEST-IN_Everything
      @QUEST-IN_Everything Před rokem

      @@BroncosandPartsGarage Hey man, I have a 96 Eddie Bauer that we are restoring, as we speak... just hit 59k miles... Imma check you out. Could possibly use some help, but can definitely use some parts ... thank you

    • @QUEST-IN_Everything
      @QUEST-IN_Everything Před rokem

      @@BroncosandPartsGarage Also, in a few months I’m gonna need someone who knows the paint ... any ideas or recommendations? I would really prefer someone who specializes with Broncos or at least has a unique artistic, Foosey kinda touch .... 👊🤓👨‍🎨

  • @Michael_3b
    @Michael_3b Před 7 měsíci +1

    sold yet

  • @thisbuckinbronco
    @thisbuckinbronco Před rokem +1

    That’s the bronco oj meant to take

  • @1DjScarface
    @1DjScarface Před 2 lety +3

    My wallet hates you… dose it still have A/C, the charger is where The A/C compressor go? What transmission can do burnouts?

    • @BroncosandPartsGarage
      @BroncosandPartsGarage  Před 2 lety +3

      Lol. Yes the A/c is relocated under the supercharger. E4OD automatic - roasted those 32x12.5 tires!!! The limited slip is worn out.