Ezcad2 operation: Hatch or reverse Hatch I Fiber 2d laser deep engraving on brass coin Bogong laser
Vložit
- čas přidán 28. 08. 2024
- Hatch or reverse Hatch? How to do? If you want to make deep engraving on brass coin with fiber laser engraving machine, 2d laser is fine. But better use 50w, 60w or more high power. When we engrave on coin, it always mentioned how to hatch. So we made this video to show you different results of hatch and reverse hatch. With Ezcad2, the operation also is very easy, you just need to add one extra circle on outer or delete one circle, then you can do reverse hatch. Fiber laser engraving machine can engrave on brass, Aluminum, stainless steel, carbon steel etc., if you want to make any test, pls contact us. And pls do not forget that we are laser engraving machine supplier, and our brand is Bogong.
Email: sales@bogongcnc.com
Wechat/whatsapp: 0086 15990901252
Website: www.bogongcnc.com
CNC machine, laser machine supplier!
#laserengraving #brasscoindeepengraving #2dfiberlaserengraving
We love our Bogong 50w JPT split fiber laser and run a lot of challenge coins. We're doing deep engrave on brass and copper. We started out with the 100 lens but moved to the 70mm and cut the engrave time in almost 1/2 (50 fewer passes with the same power and freq). Our Bogong fiber has been flawless since the very first time we turned it on. Thank you Sherry and the Bongong team for empowering us to make great things.
Thank you for your valued information, Todd. We will consider 70mm lens. Hope it keeps created the value for your business.
Hi Todd. I'm just starting with a 50W to deep engrave brass. Would you mind sharing some starting parameters? I'm learning to be sure, but some start settings would be very helpful. All the best.
@@christinefoate8786 Hi Christine -- we switched back to the 100 lens and are running 60 passes at 1000 speed, 80 power, 40 freq, .0252 hatch, auto rotate at 17.173 degrees. Depending on how deep we want we'll vary the speed (down to 800) or the number of passes. The slower speed push more heat into the coins so we tend to stick at 1000 and just run 80 passes for deeper. It also depends on the material - we do copper, brass, and stainless steel. Copper is the softest and engraves quicker than brass and stainless. We Key is to experiment but hopefully our settings give you a good starting point.
@@toddltomlinson Hi Todd. Thank you so much for replying (I didn't think you would). I've only been doing this for 2 days, but I'm thinking you went with the 110 because of the depth of field. I got all excited when I saw you went to a 70 which is what I've been using. It goes out of focus pretty quickly though. I purchased a 110 as well so I think I'll start with that one and not waste any more time on the 70. Definitely need to learn everything inside and out, but your settings certainly give me a starting point and I am very grateful.
i went with this company when i bought a laser. and am 100% satisfied.. i see other companies from China with tons of problems after its delivered to the USA but no worries with this Bogong. if you go with this company you wont regret it.
Great video so many machine providers fail on the “how to use” side of the sales. A laser provider with good ezcad training and customer service will be more successful.
Thank you Nick. We will keep updated!
Hola, se puede realizar con fibra láser 30w? Cual sería la configuración?
Muchas gracias
i hv some question..
1) how many cycle to do this deep laser?
2) for 2nd & 3rd hatch setting, is it need to disable?
i am using 50w fiber..but still not get the deep engrave like you did..
can u advice me? thank you very much
Hi, using time around 30-40mins, sorry I forgot how many passes. I only use hatch 1, disable 2 and 3. And I am using 100x100mm lens, are you using same lens ?
@@BGCNCfiberlaser alright noted..yup i am using same 100x100mm lens also..now i can do slightly deep engrave..thanks for your advice..
Ma'am. How many hours got to finish that engrave?
Around40 mins
Thank you for the amazing video, can a 30w fiber laser do this?
yes, 30w also can do, just take longer time than 50w
Even I have chosen Pen 2 and the same hatch setting as you did, the appearance does not look the same as you. what I want i do is reverse hatching.
For reverse hatch, you need add a circle or delate a circle. It depends on your drawing.
Why you not tell speed and power??
power 80 speed 200, hatch 0.04 deep engraving
power 20 speed 1200 hatch 0.05 cleaning
Hi I have this machine from you.. will the settings work on silver 925? 50w machine
yes, you can try with this parameter, almost same.
Hey! Why did the second coin was filled diffrently ? what did you do?
reverse hatch
delete one circle
Greetings friends, where can I get that vector file to practice that engraving, and if you can tell me how many watts is that laser machine ?
It’s 50w. You can send me email sales@bogongcnc.com
Hai.. how long to create that deep laser?
What are the hatch settings, and pen settings?
Line distance:0.03mm, auto rotate 36 degrees. Speed 1500, power 99, frequency: 50; cleaning parameters: power 30, other parameters keep same. Machine power: 50w.
If you draw a circle and clean the whole drawing, line distance set to 0.05-0.07mm
@@BGCNCfiberlaser thank you. I usually use much smaller hatch, which must be why it doesn't work
possible to share the files ?
Yes, send me email sales@bogongcnc.com
Could you please send me the file too
@@mikeasa4573 yes sue, pls send me email or tell me how to send it to you
May I have this file .. and its possible to create with 20w laser ?
Pls send it to my email candra70@gmail.com.
Thx for your kindness.
@@candra70a oh okay, I just saw your message. I will send it to you by email.
السعر مع التوصيل الجزائر
هل يمكنك الاتصال عبر whatsapp: 008615990901252
التواصل لمعرفة المزيد وطرق الشحن لمصر
my whatsapp: 0086 15990901252 or directly click below link
wa.me/message/YDILPYWHVB6OH1
Price
Hi Hafiz, sorry for the delayed response, do you still need price?
Please remove the music
you can turn music off