Fiber laser 50W Raycus engraving and cutting machine for 1mm silver cutting
Vložit
- čas přidán 20. 04. 2021
- We tested with 50w Raycus fiber laser engraving machine for cutting 1mm silver, the result turns good. Material size: 23.9x9.7mm, and it uses around 7mins. If you want a fiber laser engraving&cutting machine for your jewelry, then pls contact us freely. It is a good choice for enlarge your business.
To get our latest videos, pls subscribe to our channel. For more info., you also can contact us as below:
Email: sales@bogongcnc.com
Wechat/whatsapp: 0086 15990901252
wa.me/message/YDILPYWHVB6OH1
Website: www.bogongcnc.com
CNC machine, laser machine supplier!
#fiberlaser50wRaycus #fiberlaserforcuttingsilver #1mmsilvercutting - Věda a technologie
Hi daughter, thank you for sharing your expierence and expertise. ❤
I need your advice. Which 50W fiber laser is better for cutting and engraving silver sheets: JPT or Raycus, or is there no significant difference for silver? Also, what lenses are preferable: a 110 x 110 mm lens or a lens with a smaller working area? Thanks for your answer.
What parameters did you use for 50W Raycus cleaning and cutting?
Hi! Thanks for the video! Can I ask you wich lens did you use here?
100mm x 100mm
Im new to this so one question, if a want to cut a thickness of 2.0 mm of silver, i need a more powerfull laser or the same one but more time to cut the piece??? Also can i cut gold on this machine?
2mm is a little hard to cut by fiber laser. Laser has focus depth, if material is 2mm, the cutting edge is not straight. I can explain to you if you message me on WhatsApp:008615990901252
Hi, thank you for your video. one question if i want to upgrade from for example Raycus to JPT , can i just replace the module , or do i have to buy the full machine ? thanks
If same power, you need to change the laser source. If power is different, you need to check power supply also.
@@BGCNCfiberlaser thank you. one last question , for JPT they have 2 different model the LP and the M7 which model can cut better and what is the main deferent between them.
@@erumaithi LP is Q switched laser source; M7 is mopa laser source: www.bogongcnc.com/blog/The-difference-between-Q-swtiched-laser-source-and-mopa-laser-source-.html
What lens do you use on the cutting machine?
I have the 300x300 and it doesn't cut.
110*110
@@mkutsavvlogs2799 your video shows how many millimeters to cut metal?
How much time did it take and did it need any post processing (cleaning, deburring, etc)?
yes, need to be polished after cutting
What Wobble configuration did you use?
0.2x0.02mm
Hello what material was that and where did you purchase it??
this is 925 silver.
Hi what are the parameter settings for cuting and cleaning? Did you used wobble?
yes, i use wobble. Your machine power? Could you contact me by whatsapp? 008615990901252
@@BGCNCfiberlaser 50w JPT
@@endred.1600 cutting P98 S 200, wobble 0.2x0.02; cleaning Hatch 0.05, power 20, speed 1000, cancel wobble when you cleaning it.
@@BGCNCfiberlaser Thanks.
@@BGCNCfiberlaser How many layers do you use for 1.0 mm?
i want to buy a 50w machine
please can you give me details?????
yes, sure, pls contact whatsapp: 008615990901252
Can you give me any of your contact in India who purchased your laser, please
We have agent in India , pls contact by whatsapp: wa.me/message/YDILPYWHVB6OH1
Hai, Do you have agent in indonesia ?
Hi, what's the price of the machine
around USD3000-USD4000
Price of the machine plz..
under 4K USD, you can contact me: sherry@bogongcnc.com
Iska price kya hai hamko chiy
USD3650, pls contact us by whatsapp: 008615990901252
كم ثمن مكنة فيبر ليزر ٥٠ واط
تحت USD4000 ، الرجاء الاتصال بنا عن طريق whatsapp أو البريد الإلكتروني. ال WhatsApp: 008615990901252 ؛ البريد الإلكتروني: sherry@bogongcnc.com
@@BGCNCfiberlaser مرحبا اريد سعر مكنة ٥٠ واط مع مواصفات الفنية
@@user-op2mi7io2i من فضلك قل لي بريدك الإلكتروني؟ ثم يمكنني أن أرسل لك. يمكنك تكلم الإنجليزية؟
لا يمكنني كلام انكليزي
يوجد واي شات
Price kya hai
around USD3000