Make A Statement With Laser Cut Copper Jewelry | xTool D1 Pro
Vložit
- čas přidán 17. 04. 2023
- Someone broke his wrist, so I need to do a project without the use of my large stationary power tools. Hello Mr. Laser.
Want To Make this Project?
xTool D1 Pro 20W:
www.xtool.com/products/portab...
xTool Enclosure:
www.xtool.com/collections/all...
xTool Honeycomb:
www.xtool.com/collections/all...
Spring Sale - Save Up to $1380 and Get Free SVG Files! - Ends on Apr 20th. (PT Time)
www.xtool.com/pages/spring-sa...
xTool P2: Smart Desktop 55W CO2 Laser Cutter:
www.xtool.com/products/xtool-...
Copper Electroforming Kit:
enchantedleaves.com/
Artsy Fartsy:
www.joann.com/patina-solution...
Please like and share!
Instagram: / peterbrownwastaken
Facebook: / kludge1977
Twitter: / kludge1977
Website: shop-time.net
music by Jason Shaw@ audionautix.com - Jak na to + styl
So you're not going to tell us how you broke it?
Yes. It was super brave of me!
twitter.com/kludge1977/status/1645908681018720256
Man, and I thought it was gonna be the lathe! 😆
@@peterbrownwastaken such a brave act! That bear might have done worse than the socks did!!😂
@@peterbrownwastaken Peter sounds like a good dad. I still respect you!
Professional and amateur laser guy here: so another possibility for misalignment is skipping a tooth on the timing belts for the laser axes. If it catches as you were thinking, the piece may not slide, but instead it jumps a tooth and gets off by a step on the stepper motor, so features get shifted. This can also happen if there is too much slack in the belts or sometimes with too much jerk or acceleration in the settings, or if you get gunk in the teeth of the timing belt or pulley.
i am so serious and mean this in the best way possible, but i watch your videos to be able to sleep and they work so well. i have insomnia caused by paranoia and your videos help me just focus on your crafts and projects so i’m able to fall asleep. Thank you Peter Brown!
I have intrusive thoughts when I try to sleep, so Peter’s vids help me conk out, too.
In case you haven’t heard of him, Olivier Gomis’ woodturning vids are also suuuuuper relaxing.
Good luck with the insomnia. I know how much it sucks.
I have also fallen asleep watching him... which I am told is less creepy than watching him fall asleep.
His voice is just sooo soothing!😅 I've been watching him for years and I swear his voice always lulls me to sleep.😅 I loves when Peter sings randomly too! He's a great singer.
Same thing for me! I always watch his vids when I’m trying to sleep and especially when i have something the next day that makes me anxious. Very soothing :)
His videos help me sleep too
Hopefully your wrist heals well. Artist kinda need their wrists to make projects
Not just projects, building Lego and most anything. I had a triple sprain about this time two years ago. Still constant problems with muscle spasms in wrist that causes it too lock up and fingers too partially close and lock, whole arm will lock well into shoulder and part of back. Or complete opposite and even worse, whole left arm will go completely limp. Have full feeling but muscles will not respond. That was from heavy vibration using a palm nailer for assembly operation at my work. Now have too avoid heavy vibration or makes it worse.
If its misaligning randomly in one axis, you might have a loose pulley/setscrew on the motor. If the motor has a D shaft, the setscrew can back off just enough to allow it to rock a bit each way before it starts moving in the other direction which would cause the cuts to misalign after direction changes, or it could also jam to one side and seem to be working fine again until it loosens up again.
If you want to test it, try and engrave an evenly spaced grid of repeating squares(not a grid of lines that make squares) and when the laser follows the vector lines, it'll draw each individual square at a time with a lot of direction changes rather than straight lines down and across. If there's anything loose causing backlash, you'll be able to see if the squares ever misalign or don't appear to be spaced evenly with each other down each column or row.
That makes sense! Thank you!
@@peterbrownwastaken I have the Same machine looks like you are losing steps on the X directions between to outside and inside cuts, you can add more tension to the x axes there is a tensioner on the left hand side on the x Carriage.
Are you saying Peter has a,screw loose
@@Dman0001 This is one of those times where Yes and No are simultaneously correct
I usually use a sacrificial piece under my intricate cuts so the bits can't fall. Blue Tape on the back would probably help too
Separate your cutting paths by changing colors in your image editor so you can choose to have the inner designs cut before the outer path is cut to drop the earing.
Definitely definitely do this! Also from my experience with water jets always be ready to hit stop to fish out cutouts lol
A larger copper-plated, resin-filled sun catcher would be absolutely cool to see once the wrist is healed. Speedy recovery, bud!
That patina formula you used seemed to be liver of sulfur. If so, primarily, it'll give a nice brown/black patina, which can darken with time, but the sulphur compound acts as an oxidative inhibitor, so it's unlikely they'll turn green. However, I'd hazard a guess that if you made a solution using vinegar, table salt, calcium chloride, and magnesium chloride (make sure its not sulphate) and made an enclosure where you could put a small fan; hang the earrings and spray the solution into the enclosure with an atomizer with the fan on low to keep the vapor suspended for as long as possible, you'd probably succeed at getting a decent green that's not too far off of Statue of Liberty Green. Patina chemistry is very fickle. I recommend looking up The Science Company's patina formula list. It's a useful document that gives insight into the colors you get from certain chemicals.
Use some stand off material to lift the plywood up above honeycomb. This allows the small peices to fall under. Also helps prevent back flash of the laser.
Good to know. Thanks!
I was thinking the same, something for the parts too fall.
I love that so many of your projects are just for sh*ts and giggles, like the dip it series, but then you also make a ton of projects that end up being for Mrs. Brown, due to them being jewelry or hair pieces. Lol it's really sweet. Like your practicing with a media or trying something new and then the end product turns into something for your wife.
I was so glad to see this video at the top of my feed right when I needed it. My boss passed last night, but he was much more of a friend. Your videos have always been so calming to me, and I’ve been watching them in times of stress for quite a while.
Seeing this super-sized to say stained glass or a sun catcher with the resin would be the ultimate project! Please Peter Do it!!!! Please Please Please!
It's going to happen!
@@peterbrownwastaken YAY!!!
I haven't watched in awhile Peter. Amazing video as ever! I love that you have kept the old intro. So many memories! Well wishes and I hope your wrist gets better and isn't too impeding! As a drummer and painter, wrist injuries SUCK.
This video has tickled my noggin quite a bit!
For the laser, you may look into a weighted stand to minimize vibrations and check the belt tightness.
An easier way I've found to polish the copper coating is a little bit of lemon juice diluted in water, it allows you to polish off the patina without worrying about taking too much off and going to the base material.
You should also look into the blue or green "shipwreck" copper patinas. I used to make them by putting salt or salt water on a freshly coated copper piece, then putting it in a container with ammonia fumes until it patinas, then quickly wash it off with distilled water. Makes a beautiful blue patina.
I love that box/shield thing. Aww, we can't see as well, but at least we can keep seeing! We, in this instance, being you, of course.
Hope you feel better soon, mate.
😊 thank you. It’s definitely an improvement on the fumes!
@@peterbrownwastakenspeaking of fumes, when doing any kind of plating, including the "fart" solution, make sure too mention have plenty of ventilation. I worked chrome plate and made sure plenty of ventilation. Also if notice any itching or rash, stop using immediately! I developed a very bad allergy while doing chrome plate called Nickosis. It's along the same lines as poison ivy of which I am very allergic too. Mine got too the point one arm locked up having that severe of a reaction. Now if in the air nearbye, have very bad reactions, of which nothing will work. Also black locust is no fun. I cut down a small one and then ran through a chipper. Itched like hell for a few months after that no matter what. If used for anything, make sure very dried out!
Every peter brown video is the best peter brown video
My day is already made and I just woke up. Love seeing new Peter Brown videos!
My sympathies on the broken wrist. I had my hands casted three times in four years and it is no fun. (Broken left wrist, broken right wrist [both from falls] and three bones broken in left hand [car crash]). It put a major crimp in my crafting and ended my motorcycling journey.
Your wrist! Poor thing.
Love watching laser cutting, so this was awesome. Imagine when they first invented lasers....it was an absolute impossibility that you could have one in your house to do stuff like this. Love, love, love it.
Having 2 laser cutters for 8 years, never have I ever thought of copper plating a part! Love it 💪
Now you need to copper plate your face prints!
@@peterbrownwastaken 🤩
MAKE AN AMULET OF MARA AND GIVE IT TO YOUR WIFE
Yes!!
“Got to thinking, maybe I’m the Dragonborn and I just don’t know it yet.”
I just bought skyrim AE so I found this extra funny
@@peterbrownwastaken if you have the aptitude you should join the mages college in winterhold
I used to be an adventurer till i took a fus ro dah to the nutz
@@skeleton_craftGaming AE? They've released another one?
Happy healing, Peter!
I really enjoy your content; I'm not sure there's a single video of yours I haven't watched!
As a jewelry hobbyist (and aspiring jeweler) I do have some tips for this video, such as:
-- Please, please never open jump rings that way. Not only does this make them harder to close snugly and securely, but it also puts the metal under a lot of stress, which will make it brittle and much more prone to wear and tear. Instead, they should be gently twisted open and shut.
-- When using a sulfur-based patina, make sure to rinse your pieces in a baking soda and water solution before drying them to neutralize the solution. Not neutralizing the pieces won't hurt them, but it will cause them to continue to rapidly patina. This is especially important if you plan to polish or seal the piece afterward.
-- I don't recommend using a wire brush to polish anything that's been plated. Plated metal is very thin (usually less than even a tenth of a millimeter) and a wire brush will wear through it extremely quickly. Also, in cases where you're electroplating something like wood, you can even risk catching an edge and tearing the plated metal off the piece entirely.
Your videos make me so happy, thank you for everything you do, and thank you for being you Peter.
To stop the loose parts from popping up, Put some double sided sticky tape on the back side of the material. It should keep it stuck to the honeycomb but still be easy to remove once the cut is done.
You look like you're from the movie Spy Kids in your thumbnail. That's awesome dude I love you
You really tackled that project single-handedly.
This was so interesting! Thank you, I didn’t know you can electroplate just any material. Brilliant 👍🏻
It is a truly creative approach. Electroplating metallic paint so we can electroplate wood, kinda.
Sorry to see you are injured Mr. Brown!
Thanks for the video!
Have a good week!
Whoa, that's really cool!
Sorry, that you broke your wrist, Peter!
They look really cool! Especially the backlit resin one. Reminds me of a sunflower.
This vid is a refreshing change. I hope you heal well.
I just broke my collar bone and a vertebra in a car accident. Thanks for inspiring me to take on projects that only need one arm and let me sit down!
Hope you heal soon, Peter! Personally I'd love to see more of the laser cutting and plating. I just got my first 3D printer, so perhaps plating some 3D printed stuff too. Stay safe, stop fighting with bears! 😉
Nice. About half a century ago I tried to electroplate wood. I attempted to make a Van Der Graaf generator. I never got my wooden top smooth enough of spherical enough to actually work. But since I took lots of Polaroid pictures of the project and because I explained why it failed I still got an A on my Science experiment.
Whoa! I love how dainty they are, if you make more of these I’d love to see them!
Sometimes challenges force us to grow creatively. So glad you have decided the broken arm will be one of those times! Can’t wait to see where your new explorations take you!
I hope you get a full recovery! Any plans on casting the cast after?
Perfect timing sir, I also just broke my left wrist. Broken left wrist club
Oh dear on the broken wrist. I hope it heals fast and with no lingering issues.
I loved the earrings you made - very nice.
Ouch! Get better soon and thanks for gracing us with content in spite of your injury!
Hopefully mrs brown likes the earrings if you gave em to her, if i may suggest something, maybe make a pare of Glasses out of the same material and copper plate it and put some resin in the eye holes, preferably a galaxy style with black purple and white spots. I think that would be cool
I'm so glad you have a new toy!! That means more videos lol.
Thank you , Peter .
🐺
Wishing you a speedy recovery Peter. No more wrestling bears or running in socks in the future please. Love to you and Mrs Brown
I was just thinking how much I wanted to learn electroplating. And then you upload this. 😁
Thank you Peter for teaching me that all good things take time💯
FYI, my favorite (Blue) copper patina process is a salt and ammonia method: 1) polish copper or brass, 2) spritz copper surface with NaCl salty water (you want LOTS of salt on the surface of the copper), 3) suspend your salty parts over a bath of ammonia with a plastic bag covering the bath and parts so the ammonia vapor does not escape, 4) place bath out in the sun to get the ammonia vapor to evaporate and react with the salty copper surfaces. Over the course of 30 minutes, it produces a lovely blue patina like what you see on antique bronze statues.
Wishing you a speedy recovery. Thanks for finding something you could share with us even with your war wounds XD
This is so cool, I didn't know this is how this is done!! Best wishes for a speedy recovery :)
I used to have to gold plate pcb for an electronic manufacturer. To do that; since I couldn't submerge the board, I had to use a little bottle with a dropper and hold the electrodes in my hand to add the current. You get used to the smell but I always enjoyed watching the copper board turn to gold.
I do not understand how this video has under 90k views. Don't a bunch people sleep with this man? I mean fall asleep listening to his videos. Obviously.
Ouch! Hope it heals quickly and completely! Cool project!
Take care of your wrist! We need it as good as new for more videos in the future!
"I stared directly into the trap Ray!" - me watching Peter lift the lid on the laser cutter
I hope you have a quick recovery.
Aww dude! So sorry to hear about the wrist! Thanks for the vid, get well soon!
Hope you heal up quickly! the earrings looked great!
Wishing you a swift and uncomplicated recovery!
Forever glad to have more Mrs. Brown in the videos. Get well soon, bear wrestler.
Sounds like it'll be fun seeing more similar projects
laser cut and assemble a lamp, and use that resin filling technique to shade it. i think that would look really cool
Good vid Pete, you should try sanding the objects smooth before plating and see if it looks like a solid piece of copper.
Get well soon.
Awe the sunflower earrings are so darling!😊 I would love a pair!🌻
i saw the thumbnail and literally assumed they were cut from a sheet of copper lol. super impressive effect.
I bought that same bottle of stuff from Michael’s and I had no luck with it whatsoever. You might want to get a small bottle of liver of sulfur gel, which you dilute into very hot water. It patinas faster and darker, and then you can knock it off with a brass wheel (which, btw you might want to get for your dremel; the brass brushes are less scratchy on the copper). I’ve been trying to figure out how to get the cool verdagris on them (Statue of Liberty green) consistently so that’s what I’m workin’ hard on.
Oh and when working with liver of sulfur or any sulfur-based patina solution, you can stop the reaction best with warm water and baking soda. Rinsing it does mostly stop it, but you could always have sulfur particles left over. The baking soda neutralizes it entirely.
Sorry for the wall of text! LOL
I’m very glad it wasn’t a shop accident! Stay safe, Peter!
These are just beautiful, with or without the resin.
Can't wait until you try to laser cut designs on the cast itself or after your are healed and the cast is removed, make an acrylic lamp or something with a fake hand in that cast holding it.
Really interesting Peter, does open up a lot of possibilities for projects. That sunflower especially was beautiful!
Get well soon with the wrist 👍🏻
Thick double-sided tape (mounting tape) between the honeycomb mesh and the back of the wood prevents it from shifting as it is cut
The butterfly wings turned out beautiful!
Hope your wrist recovers well Peter! Enjoyed the trials and tribulations of this project!
I love the copper platting thing it’s so cool! hope you recover soon. love ur content 😊
"The last time you saw the laser, it didn't have any of the things that makes it safe" MR. BROWN 🤣
Brilliant video as always Peter! Informative, entertaining and a beautiful end product!
On the note of that pseudo stained glass bit, I bet that would make a very cool lamp shade design
anyone else want to see the wrist x-rays?
Thank you for the informative and entertaining content, and I hope you heal fully and swiftly.
You should try a fume box for patina. I just took a plastic container with a lid and made a mesh basket to put my things in that was suspended from the bottom a couple inches. Put a little bit of your patina solution and a little bit of water in the bottom of the container, but whatever you want patina in the basket and put the lid on it. You will start getting a rainbow patina on copper that is really pretty. Blues and purples and eventually it kind of goes to a silvery color. If you're making electroplated earrings I really suggest trying that method out. Just make sure and give the stuff a good rinsing afterwards in some rubbing alcohol or denatured ethyl alcohol to clean off any residual sulfur or they will keep tarnishing and eventually look like an old penny instead of all rainbow and pretty.
Sorry to hear about your wrist hope you heal up quickly.
Maybe you could just do a quick Dye Trying episode while you recover? Get well soon
Feel better, Peter!
Ooh! Ooh! Make micarta from the cast, turn a bowl, then throw that bowl tf away, because used casts are NASTY.
hope you get well soon champ, thanks for the content 👍
You can add bridges which leave the smallest piece of wood between your cut areas. Think the effect how laser cut kits are built and you pop out each piece. Software dependent.
Alternatively, you can also raise the board so that those pieces fall through, being sure to order the cut parts first in the laser software so that the last thing to cutaway is the final part from the stock.
Get well soon Peter!
great videos. love the design.
Peter really WORKING the silver fox vibes
I’d recommend the Midas patina solution by Rio Grande. You don’t have to mix it and it is super effective. Just be sure to only dip the piece for a few seconds at a time, washing between dips in the solution to ensure a really good and even oxidization. Great video!
This was fun, and I hope your wrist feels better soon!
That resin coper plate combo through light, WOW
Awesome video as always! Looking forward to new projects you do, but don’t push yourself too hard and get better! Also always love a Mrs. Brown cameo 😂🎉
Those are so pretty. I hope your wrist gets better soon
They are beautiful
I always wondered about the term “artsy fartsy.” It all makes sense now!
Thank you so much!!!
those are so pretty! Hope your arm heals up soon!
wish your arm a speedy recovery
Great Job!
I'm liking the new thumbnails