Connect Yamaha MG10XU To Powered Speakers or Studio Monitors
Vložit
- čas přidán 7. 08. 2024
- In this video, we show you three ways to connect the Yamaha MG10XU to speakers and/or studio monitors.
PRICING FOR EQUIPMENT FEATURED IN THIS VIDEO:
► Yamaha MG10XU Audio Mixer: currentprice.io/mg10xu
► M-Audio BX-4 A/V Speakers: currentprice.io/maudio_bx4
► Yamaha HS5 Studio Monitor: currentprice.io/hs5_monitor
► Adam Audio T5V Studio Monitor: currentprice.io/adam_t5v
► Rode NT1 Microphone: currentprice.io/rode_nt1
► Option 1: 1/4" TS to RCA Cable (Unbalanced) - currentprice.io/ts_rca
► Option 2: 1/4" TRS Cable (Balanced) - currentprice.io/trs_cable
► Option 3: XLR Cable (Balanced) - currentprice.io/xlr_cable
► Option 4: 1/4" TRS To XLR Cable (Balanced) - currentprice.io/trs_xlr
► Mic Stand: currentprice.io/desk_stand
► Rode PSA1+ Boom Arm: currentprice.io/psa1_plus
► Quality Acoustic Treatment Panels: currentprice.io/soundpanels
These are affiliate links, and I may earn a commission from Amazon (and others) on qualifying purchases.
BLOG POST WITH MORE INFORMATION:
► kettnercreative.com/audio-mix...
XLR CABLE BUYER'S GUIDE: kettnercreative.com/buyers-gu...
BEST SETUP FOR 4 PERSON PODCAST: kettnercreative.com/audio-mix...
CHAPTERS:
0:00 - Introduction
0:35 - Equipment Setup
0:55 - Price & Specs
1:10 - Balanced vs Unbalanced Cables
3:03 - Audio Mixer Outputs
3:37 - Option 1: 1/4" TS to RCA Cable (Unbalanced)
4:46 - Option 2: 1/4" TRS Cable (Balanced)
5:52 - Option 3: XLR Cable (Balanced)
6:40 - Option 4: 1/4" TRS To XLR Cable (Balanced)
7:53 - Final Thoughts
STUDIO EQUIPMENT:
Editing Computer: currentprice.io/16_mpb_m1max
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Headphones: currentprice.io/nth-100
Studio Monitors: currentprice.io/adam_t5v
Studio Subwoofer: currentprice.io/adam_t10s
Video Recorder: currentprice.io/ninja_v
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
SOFTWARE & TOOLS:
Final Cut Pro: geni.us/qW5K
MotionVFX Plugins: geni.us/5SFH6w
Affinity Photo: geni.us/86RLOhZ
Epidemic Sound: geni.us/eiPf1G
Envato Elements: geni.us/ENFErA
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.
All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.
Copyright: 2024 Kettner Creative Inc., All Rights Reserved. - Krátké a kreslené filmy
Great video. thanks for everything :)
thanks for sharing nice video
Nice video.
What if I was to go live using a smartphone, how do I connect it to the mixer
Thank you!
hey kindly help my interface has a problem but i have a yamaha mg166cx mixer i believe i can use it to record music in the studio but how do i record audios with it ? i have a condenser microphone and headphones and studio monitors.whats the best connections i can do and the right settings? your help will be highly appreciated and keep on doing your videos they are really helpful
i just want to ask if tower speakers with 124watts are compatible to the yamaha mg 10xu?
Is there any way to convert my TR speaker cables into TRS or XLR cables so I don’t have to rewire my whole setup?
Nice video bro,, could you upload how to connect audio interface Steinberg UR12 + Yamaha Mgxu12 with yamaha monitor
Why connect the Steinberg? Seems un-necessary with the MG10XU
Thanks!
Thank you!
Would I get better sound quality using this instead of a volt audio interface
What if your PA system has only RCA input and you have to place it far . Can I run XLR from the mlxer to about 3 feet to the speaker then use an adaptor to convert XLR to RCA the rest of the way , which is about 3 ft? Is there a better way to make that work ?
Can I connect my LG LHB725 5.1 home cinema to my Yamaha MG06X mixer? Pls explain what connectors will I need? Thanks in advance
Is there a provision to connect the snake cable?
Hi. How do i connect my mg12xu mixer to my audient id44 mk 2 for studio recording?
What is this? Casual Friday? Where's the KC jacket? 😂
Right? I figured 3 logos in the video was probably too much now that we have the boom arm. We'll see, the jacket might make a comeback.
And the buzz cut? Lol
I have two self-powered speakers And One powered subwoofer. To set up ,will be for karaoke what would you recommend how to set it up.
What is the best Speakers to get for Karaoke Disco
I noticed the xlr connections to my speakers have different volume levels even when I set the speakers at the same volume. Have you had issues with one of the xlr outputs being less powerful than the other?
Good day,
I use a Professional Sound card and a Yamaha MG10X, I have tried to connect it for streaming on facebook and recording, but I have not been able to get the sound from the Mixer into the live stream and recording. I have tried using Vmix and Studio.
I will really appreciate it if you can guide me through the connection.
Thank you
Where are you getting the music signal from . Music to mg10?
Is it possible to output from the XLR and 1/4 inch stereo outputs at the same time to send out two copies of the stereo mix? For example, one to the audio interface, and the other to speakers.
Yes, you can do that.
For some odd reason , I’m getting no audio coming into my mixer , but my pc detects the mixer and even got levels coming into my pc , but no audio output ? I got the same trs balance connections
Can you guys set up a Tspring? The logo looks great.
We had one but never had a single sale in 2 years/9 million views so we took it down.
Nice.Though I Still have a question.Would you mind showing how to connect the mixer to speakers if you have more than 2 speakers?For example,how do I run the mixer to 2 subs and 6 mid-range speakers?Thank you in advance
You should use extra amplifier to power those speakers
@@alp6181 Understood
@@djdashkenya 😂
Sorry which way is better
1 - Yamaha MG10XU monitor out balanced 6.3 jack to XLR RCF AYRA PRO6 monitors or ?
2 - Yamaha MG10XU Stereo out XLR to XLR RCF ART 715 and after from ART 715 to AYRA PRO6 using XLR to XLR ?
Kettner Creative Chanel please help me whit this 🙏
Hi kettner! is 5/6 channel can use both at the same time?
Yes you can!
@@kettnercreative Hello Kettner, i try using both channel 5 is 2 monojack for my DJ controller and 6 RCA for my mobile. if i try using same time it not working maybe next time can make a video also i really appreciate Thank you🌻
Instead of connecting 'powered speakers' could I use two guitar amplifiers (Clean/Line) with the MG10XU?
It’ll work, but guitar amps are built for guitar frequencies. They have quite narrow ranges and won’t sound good by comparison to proper speakers. There is also a risk of damaging the amp with base frequencies.
@@jamesfilms_ Good to know and thank you for the reply. I'm using them in a bedroom so the volume is quite low, just trying to utilize what I have instead of buying more gear.
Do audio mixer work and sound better with powered speakers?
Powered speakers are better than passive speakers for a lot of reasons.
@@kettnercreative I heard that before. Can you explained your version as to why?
@@cristiandiaz6333 1) You have perfect compatibility for specs/wattage. Gone are the days of blown speakers or mismatched amps.
2) The shorter the distance is between the amp and speaker, the better the quality.
3) The whole package is covered by the same warranty.
4) No more loose connections between amp/speaker.
5) Smaller footprint/less outboard gear
6) Burnin/run time is identical for the speaker/amp
@@kettnercreative Thank you so much. Very nice of you to respond.
Why my level meter not bouncing like that.
Couldnt you use rca to rca cable and go tape out of that board?
There isn’t a tape out on the current gen of this mixer. Only the MG102C had that.
@@kettnercreative ohhh. Gotcha. How far can you go with just regular rca cables
@@CadePedersen I wouldn’t go more than 10’
Can I hook up a powered subwoofer?
Yes, you can.
@@kettnercreativehow can i do that ? i have as i have a speedwoofer 12S ,with this mixer
Confusing video - the main outputs are for driving a stand alone amp - from there you go to your unpowered speakers - the monitor drive is to drive your powered speakers. keep it simple.
Thank you!
You're welcome!