I'm sure someone will be coming up with one soon. It's easily replaceable and I hear they are selling a lot of these guns. Just picked mine up this morning, guy at the gun store says he has sold 30 of them since he got them.
the grip extensions are the most common complaint I see on FPC videos. If you could solve that "gap" left by not using the extensions, I think a LOT of us would be highly appreciative :) I was already on your site about to buy a magwell to mitigate the gap :)
@@floydscustomshop2157 I saw that after posting! :D I'm planning to do some experimenting with your extensions/magazines because my hands/wrists are on the smaller side, I think I might be able to get away with the +6 on the 23s in the stock >_>
Yes, I have been looking for a mag well spacer. I have a full size m&p pistol. And do not plan to get a compact. I do not like the spacers on the magazines. Please make a mag well spacer to fit the 17 round mags. I will buy one. Frank
Canadian here. If you made a grip adapter to full sized grip to get rid of the loose spacer on the magazine, you would make a killing in Canada. Everyone would buy one. The only reason I haven’t bought one yet is because I hate that it’s a compact grip and not a full size grip
We make spacers t go with our extensions to fill the gap. They are tight to the mag so they don’t slide off. Unfortunately we don’t have the licenses required to sell or ship outside the USA
@@floydscustomshop2157 maybe look into IRUNGUNS. Canadians use them as a middle man to import. I think you could do that avenue. I just really want to be able to use the mags in my MP9 and the FPC without worrying about that spacer and fit all the same in the full size grips
I’m interested in a mag well that will accept the full size mags on this gun since I have 4 mags for a comp spec m&p 2.0 I’d rather have mags that work in both guns compared to having to take spacers off a mag to fit in the other
im also finding that the 23rd magazines are a bit heavy in the stock. so i bought two 17rd mags that seemed to make me more happier of the weight savings. i think a 3rd plate would be more ideal. that way you can get 20rd and 25rd for most people are inclined to remember.
@@floydscustomshop2157 okay. Thanks for the reply. The one you make for the compact grip now is a definite improvement. I can live with that. If the other one was right around the corner I would wait, but the compact will work. Thanks again
Yes just remove the spacer sleeve. There is a slight chance of over insertion though if you slam a mag in with the bolt open. We do make extensions and spacers to fill the gap with the Magwell
@@billjamison2877 same... and im a trigger snob. i find this trigger is remarkable. 5-6 pounds is a good pull. you never know if your going to trip over a rock.
The 15rnd mags you will need to use our plates or extensions. For the 17rnd mags that will stick past the Magwell with the stock plates. You can also use our plates or extensions and our spaces to fill the gap and prevent over insertion
is there a way on your next magwell. that you can just take off the adapters of the mag and build around the original stripped mag rather buying all these other mag plates from you? i mean i really do want to buy this. but then again. as a budget bug out rifle/truck gun. you want use that extra money on ammo. and where maybe people could just cut off the curve on the oem baseplate to fit the custom magwell or something? ive done a ton of my rifle on diy adjustments. ive polished both feed ramps. tapped my bolt release and installed a thumb screw with red loktite, pulled out my mag release button and masked it off to epoxy to extend it, found a old magpul butt pad and sanded it down to fit the stock to give it a grippy texture when on hard floors. had to readjust my bolt drop a little. because i think that the gage of metal is too small to hold back the bolt. where it started to go inward rather that outward. now the only things that need to be fixed from stock. was that tension bar. is this still in the works?
I am working on a longer Magwell to turn it into a full-size grip, if I can figure out how to make it compatible with both stock and our plates or extensions I will. The one we make now though you can just remove the spacers to use them, but there is a chance of over insertion, if you slam the mag in with the bolt locked back. The tension release is still in the works
Seems my entire grip and mag well are different than the one showcased in this video? Gonna assume they updated the grip and mag well, and this does not work for that?
you could find a stl for a M&P plate and change the dimensions enough so it would fit, and if you don't have a printer there are companies that will print it for you, or if you have a local makerspace that's an option, too
The 23 round mags will stick past the compact or FPC Magwell, they are the same 23 round mags that come with the FPC. You will need to modify or change the plates in order to run our 2.0 metal Magwell for the Green metal spec series. If it’s the grey one that has the compact frame. Then just remove the spacer
@@floydscustomshop2157 its actually the bull shark 4.46 spec ops i believe and thanks for the timely response , is there any way you can me what to order for the job. Thanks and God bless a kind stranger like yourself
I would like to see how a full-size 17 round magazine fits in after this Maxwell is installed. I want to eliminate the stupid little biscuits we need to have at the bottom of our full-size magazines.
We make a spacer sleeve that matches up with our plates and extensions to fill the gap on the full-size mags. They are nice and tight so they don’t flop around like the ones that come with the mags
If they are for the full-size. Using the spacers on the mags to make it make it the full grip.. if they are for the compact we do make plates for the ten round mags
@@floydscustomshop2157 Im unsure of the difference between a compact and full size. I'm in Canada so our magazines are restricted to 10 rounds. In addition to the 10 round magazine there is a plastic sleeve that slides over my magazines to fix the gap that came with my gun. I'm unsure which I would need at this point. I'm new to Smith and Wesson.
@@JG-ze7md No problem, yes if it is also using the spacer then it’s the full-size mag version. Just removing the spacer will make them stick past our Magwell and work fine but with a chance to over insert with the bolt locked back. You can also get our ten round plates for the compact, then they will mach up to our Magwell and not be able to over insert. We don’t have the licenses required to sell or ship outside the USA however, hopefully you have a connection that is able to ship to you.
@@JG-ze7md the low pro or the competition size. Low pro will only stick out a little from the magwell. The competition size will have a little more length to give you a better pad for insertion
Please make it possible not to have to use these stupid spacers that I've been dealing with ever since I bought my shield 1.0 and my m&p compact 1.0 . Many will appreciate and buy it. TY
Got mine today 7/20/2024 easy to install, grip feels great. Thanks Floyds…
@@lenstage3982 thank you!
How about someone jumping on making bolt release extensions?
agreed
I'm sure someone will be coming up with one soon. It's easily replaceable and I hear they are selling a lot of these guns. Just picked mine up this morning, guy at the gun store says he has sold 30 of them since he got them.
the grip extensions are the most common complaint I see on FPC videos. If you could solve that "gap" left by not using the extensions, I think a LOT of us would be highly appreciative :) I was already on your site about to buy a magwell to mitigate the gap :)
We make spacer peace’s to fill the gap when running our plates or extensions. They are nice and tight so they don’t slide around like the stock ones
@@floydscustomshop2157 I saw that after posting! :D I'm planning to do some experimenting with your extensions/magazines because my hands/wrists are on the smaller side, I think I might be able to get away with the +6 on the 23s in the stock >_>
you should make extended mag release buttons for these and the 2.0 metal
got mine today, installed very easy, great fit, makes the grip feel lots better. same high quality as always from Floyd's
How does the mag look? The video doesn't show!
Yes, I have been looking for a mag well spacer. I have a full size m&p pistol. And do not plan to get a compact. I do not like the spacers on the magazines. Please make a mag well spacer to fit the 17 round mags. I will buy one.
Frank
Stay tuned
Same here!!!! I would definitely buy one! Just checked the website, nothing yet….
Canadian here. If you made a grip adapter to full sized grip to get rid of the loose spacer on the magazine, you would make a killing in Canada. Everyone would buy one.
The only reason I haven’t bought one yet is because I hate that it’s a compact grip and not a full size grip
We make spacers t go with our extensions to fill the gap. They are tight to the mag so they don’t slide off.
Unfortunately we don’t have the licenses required to sell or ship outside the USA
@@floydscustomshop2157 maybe look into IRUNGUNS. Canadians use them as a middle man to import. I think you could do that avenue.
I just really want to be able to use the mags in my MP9 and the FPC without worrying about that spacer and fit all the same in the full size grips
I’m interested in a mag well that will accept the full size mags on this gun since I have 4 mags for a comp spec m&p 2.0 I’d rather have mags that work in both guns compared to having to take spacers off a mag to fit in the other
I second that!
im also finding that the 23rd magazines are a bit heavy in the stock. so i bought two 17rd mags that seemed to make me more happier of the weight savings. i think a 3rd plate would be more ideal. that way you can get 20rd and 25rd for most people are inclined to remember.
need a better bolt release... :(
Are you any closer to developing the extended or 'competition' as you said style mag well to flush-fit full size mags?
It’s on my project list, but hasn’t been requested enough to make it a priority
@@floydscustomshop2157 okay. Thanks for the reply. The one you make for the compact grip now is a definite improvement. I can live with that. If the other one was right around the corner I would wait, but the compact will work. Thanks again
Does that locking pin come with your kit or is that a stock part? I'm looking at getting into this platform. Cheers.
Our Magwell comes with our locking pin
i noticed a flare not being very tight on the tolerance on the front of the grip. are you planning to fix that for the next batch?
Flare not being tight? What are you referring to?
Will the 17rd magazine that the FPC comes with work with the mag well.
Yes just remove the spacer sleeve. There is a slight chance of over insertion though if you slam a mag in with the bolt open. We do make extensions and spacers to fill the gap with the Magwell
Cool! Do they make aftermarket triggers for the FPC yet?
Not that I have seen yet
I really like the stock trigger. One of the better ones I've come across. Just my opinion. What do you think?
@@billjamison2877 same... and im a trigger snob. i find this trigger is remarkable. 5-6 pounds is a good pull. you never know if your going to trip over a rock.
With this magwell, can I use 15rd and 17rd magazines with non-OEM baseplates (UTG)? Thanks.
The 15rnd mags you will need to use our plates or extensions. For the 17rnd mags that will stick past the Magwell with the stock plates. You can also use our plates or extensions and our spaces to fill the gap and prevent over insertion
is there a way on your next magwell. that you can just take off the adapters of the mag and build around the original stripped mag rather buying all these other mag plates from you? i mean i really do want to buy this. but then again. as a budget bug out rifle/truck gun. you want use that extra money on ammo. and where maybe people could just cut off the curve on the oem baseplate to fit the custom magwell or something?
ive done a ton of my rifle on diy adjustments. ive polished both feed ramps. tapped my bolt release and installed a thumb screw with red loktite, pulled out my mag release button and masked it off to epoxy to extend it, found a old magpul butt pad and sanded it down to fit the stock to give it a grippy texture when on hard floors. had to readjust my bolt drop a little. because i think that the gage of metal is too small to hold back the bolt. where it started to go inward rather that outward.
now the only things that need to be fixed from stock. was that tension bar. is this still in the works?
I am working on a longer Magwell to turn it into a full-size grip, if I can figure out how to make it compatible with both stock and our plates or extensions I will. The one we make now though you can just remove the spacers to use them, but there is a chance of over insertion, if you slam the mag in with the bolt locked back. The tension release is still in the works
@@floydscustomshop2157 thats sweet. i look forward on the magwell upgrade. did you quit on the mag tention bar for now?
Seems my entire grip and mag well are different than the one showcased in this video? Gonna assume they updated the grip and mag well, and this does not work for that?
Can you message us on instagram or facebook and send me some pictures of your grip? H have not seenor heard of any changes on the FPC
would love to get one
I wish they made a magwell that runs oem magazines. I have the set on my regular M&p 2.0.
you could find a stl for a M&P plate and change the dimensions enough so it would fit, and if you don't have a printer there are companies that will print it for you, or if you have a local makerspace that's an option, too
On these Carbines you know what grip and or Trigger the FPC replicates on the MP pistol line model /shield?
The grip is the same as the M&p compact, but the trigger system is completely different
@@floydscustomshop2157 I’m thinking getting Talon grips So Compact should fit.🤔
Might sound stupid or late got class but will the 23 round spec opps mags work with this mag well. Thank you for letting me know 🙏
The 23 round mags will stick past the compact or FPC Magwell, they are the same 23 round mags that come with the FPC. You will need to modify or change the plates in order to run our 2.0 metal Magwell for the Green metal spec series. If it’s the grey one that has the compact frame. Then just remove the spacer
@@floydscustomshop2157 its actually the bull shark 4.46 spec ops i believe and thanks for the timely response , is there any way you can me what to order for the job. Thanks and God bless a kind stranger like yourself
@@RobertJones-nf9ve if you can message me on Facebook or instagram I can send you some links
I would like to see how a full-size 17 round magazine fits in after this Maxwell is installed. I want to eliminate the stupid little biscuits we need to have at the bottom of our full-size magazines.
We make a spacer sleeve that matches up with our plates and extensions to fill the gap on the full-size mags. They are nice and tight so they don’t flop around like the ones that come with the mags
@@floydscustomshop2157Instead of a sleeve, I wish the grip was 17 round length. Eliminating the need for a sleeve!
Trying to order one of these would rather have the competition size
Email the office if you want this version. Will be on the website soon
Will this flared magwell work with the factory 10 round magazinea correct? There will just be a slight gap at bottom?
If they are for the full-size. Using the spacers on the mags to make it make it the full grip.. if they are for the compact we do make plates for the ten round mags
@@floydscustomshop2157 Im unsure of the difference between a compact and full size. I'm in Canada so our magazines are restricted to 10 rounds. In addition to the 10 round magazine there is a plastic sleeve that slides over my magazines to fix the gap that came with my gun. I'm unsure which I would need at this point. I'm new to Smith and Wesson.
@@JG-ze7md No problem, yes if it is also using the spacer then it’s the full-size mag version. Just removing the spacer will make them stick past our Magwell and work fine but with a chance to over insert with the bolt locked back. You can also get our ten round plates for the compact, then they will mach up to our Magwell and not be able to over insert. We don’t have the licenses required to sell or ship outside the USA however, hopefully you have a connection that is able to ship to you.
@@floydscustomshop2157 all good! I have a connection in the US. Is this what I need? S&W M&P 10RD COMPACT Low Pro 9MM MAG PLATE
@@JG-ze7md the low pro or the competition size. Low pro will only stick out a little from the magwell. The competition size will have a little more length to give you a better pad for insertion
Please make it possible not to have to use these stupid spacers that I've been dealing with ever since I bought my shield 1.0 and my m&p compact 1.0 . Many will appreciate and buy it. TY
It is a shame you didn't show it with the mag.
M&Ps are incomplete without Floyds and Apex....
Change my mind.