RTV X1100C With Hydraulic V-Blade and Rear Sander!
Vložit
- čas přidán 10. 07. 2024
- An all in one package by Kubota for your snow removal and sanding need! This Kubota RTV-X1100C is equipped with a front fully articulating v-blade plow and rear sander!
Content provided by Huckabones Equipment, Cobden Ontario Canada.
Find us online: www.huckabones.com
Contact us by e-mail: youtube@huckabonesonline.com
Call us: 1-613-646-2708
Content edited by Mainville Media:
/ mainvilleatvandoutdoors
#Kubota #RTV #X1100C - Auta a dopravní prostředky
Find us online at www.huckabones.com or give us a call at 1-613-646-2708 for any of your Kubota and equipment needs!
Ahhhh rear sander I got it now
I am considering getting the kubota v snow plow for a rtv x1100c , without the pto system. can you remove the hydraulic compartment on the front bumper easily to be able to have the wench?? or you lose the option of having a wench at all? Thank kyou
What is a rear sander . Guess I'm gonna learn
What is the total cost of this set up please? Thank you.
If you don't use all your sand/salt, what are the options to empty the spreader?
Shovel out all you can, then either use a small scoop to remove, excess not gotten by the shovel, then use a shop vac to get the rest. Run the spinner and auger to remove the rest. The Kabota x1100C has a hydraulic dump for the box to get the angle as well, using the vibrator to agitate the box. I find course JetBlue salt, and HomeDepot bags of course gravel run through spreader well. Keep your cover in good repair, as holes allow water to get at the salt and it will over time become concrete in the box.
Really Cool too bad you cant get one.
yes it is, really hoping this Spring everything is back to normal inventory
Can you use this sander on the 850?
Cant see why not but we haven't attempted it to know 100%
Confirmed. Went to my local Kubota retail store, and 850’s can as well.
Going on next week
If the holes for the tiedown attachment points in the box bed, are spaced out, where I worked, we transfered the salt spreader from our X900 to the X1100C. We did have to modify the electrical harness in doing so. But the harness maybe more compatible to the 850 from an X900.