How to fix Yamaha Blaster 200 bogging problem
Vložit
- čas přidán 22. 03. 2019
- Make sure the carburetor is getting plenty of air and fuel to keep the engine running make sure the carburetor is clean and has all the crap cleared out of it make sure the exhaust fits tightly to the engine and doesn't have any holes or cracks in it make sure the wiring is all top shape and get rid of the tors if you have any questions put them in the comments
Bra I just got a blaster and didn’t know a lot about but heard good things so I sold my dirtbike and got one and when I got it there was a box on the top didn’t know what it was but thanks to you I now know what it is and I need to take it off and mine was also bogging
Very informative great video
Thanks for the info good job. 👍
Nice vid
Try the valve reeds take them out and see if u can see through them
Would this work for a Yamaha blaster 2006?
I'd like to mention after rebuilding a blaster that sat in pieces for 8 or 9 years , I had a serious bogging problem, did everything I could think of to fix it without success, until eventually I discovered no exhaust fumes coming out the tail pipe, turns out some critter built a nest in there and I didn't realise, after a clean out she's running like a top
Does it have a battery
What year is/was it?
I’m looking to buy a blaster. Guy has a aftermarket pipe on it and says if not staying on gas in 1st it will bog out. Sounds like jets need to be clean or just carb in general! Should I buy it? Supper clear blaster 2000
if it at least runs that is a good sign maybe he changed the gear ration on the sprocket to a higher gear so its a little boggy. or the original tires (the balloon looking ones) are harder for the low torque engine to spin that can happen maybe get shorter tires. also is it made in the year 2000 or priced at 2000 if that is the price that is at the top of the price range and should be perfect
This is my dream quad
Same dude but i have one
Same
Y'all can buy mine. 😂
I want a banshee
@@chadtastic6587 same😂
I had to drill holes in the air box lid to make mine run better
What throttle cable do you use (with carb that on the blaster) and where can I find it PLEASE
It depends on if you have the tors seystom or if you dont
The one I have I got off Amazon
i use a motion pro throttle cable just go on amazon and look up motion pro throttle cable and heres the link, www.amazon.com/Motion-Pro-01-0390-Eliminator-Throttle/dp/B000GZJAZU/ref=sr_1_2?keywords=motion+pro+yamaha+blaster+throttle+cable&qid=1585170578&sr=8-2
I picked up a motion pro also it should be in the mail tomorrow along with new air filter new carburetor and throttle cable
World of wheels
I just bought a blaster and its very difficult to start but it idles fine and it’ll rev when idling but when in gear it’ll putter very bad and almost like back fire and rev up and down like nuts.
does it have tors
Jason Bowser I removed my tors and it have the same problem he is having
@@jacksonyork6433 same
Jordyn Martinez sounds super lean likes it almost out of gas
Did you figure it out Im having the same problem
Heres a tricky one i just boought a blaster and it gots spark compression fuel and air i cleaned the carb and only bump start will sometimes work then itll either 1. Kill itself or 2. Bog itself down and like i said only bump start works from time to time with choke wide open
look into carb jetting make sure its not flooding or running lean and quality of spark. or maybe your idle is just to low. Check your reeds make sure they are tight with no gaps.
So I was in fourth gear on my blaster in the woods and then I’m on the throttle and then it just bogs bad is it reeds or does it need to be rejetted??
Probably reeds
I just got a blaster
I got a 2000 yamaha blaster yfs200 start but as soon I hit the gas shut off I put new piston new carburetor new spark plug and wire and still bogging out I don't know what else I can do any suggestion
clutch prolly or not enough gas but if it revs and idels fine id say clutch issue
@ropeyzkittlez9703 would the clutch just need readjusted or new clutch pack? Trying to diagnose my buddy's blaster and I've noticed his clutch isn't always engaging and only seems to have power at half throttle..
Yo I need your help the my blaster
What's up with it?
Jack Theisen My 95 blaster bogging it turns on well just brought a spark plug
@@isaiahgiles251 seems likie a real common issue on theese wonder what it is i bet its something dumb i was thinking clutch issue but i dont think it is maybe not enough gas
@@jacktheisen dude I need help my blaster was running good and after run out gas know don’t want start up and make like a explosion
Alguien Podria ayudar mi blaster queda acelerado cuando me detengo . Saben como solucionar el problema
Ur bro need for vforces haha n you saying modded with pipe aluminum air box uni oversized filter n u sayin 240 or 250 jet? Lol I live in Maine not to hot in summer right now and I have a 290 jet in my 04 lol
I Dont really think I have a bogging down issue but could use some advice.
So, The story goes
I bought a blaster a few days ago, because I used to ride them about 15 years ago. And this one has the same issue one of the brand new 2003's had I used to ride.
When Reving out any gear, it feels like there is a HARD Rev limiter kicking in Like 1k rpm's short of where the engine should easily rev out to.
Its Really strange because a friend had 2 brand new 2003's back when they were new, and 1 of them had the exact same issue, it just would not rev out like the other one did. and it was a very noticeable "rev limiter" like feeling.
TheOnlyTwitch.R6 hey man, I have a 2001 Yamaha blaster and it has about the same issue, you hold the throttle wide open and it will just putt and not put out the correct power, if you hold the throttle for long enough it will hit powerband and go a little faster.
It might be a tors problem
I have a 200blaster bored 80 over top shape super fast 2 stroke any one interested
How much. Where your from
I need help with mine if you still have this account
What do you need help with?
Jack Theisen do you think we can contact each other on something else I can send vids
or please watch me video
You trade your blaster for a YAMAHA
400cc 4 by 4
Color: red whine
Not automatic
Big bike
Are you asking if I would?