FASTACE FORK SEAL REPLACEMENT FOR SURRON & TALARIA
Vložit
- čas přidán 7. 11. 2023
- Installing new skf seals in the fast ace 2.0 fork alx13rc on my surron light bee. This also works for talaria , same forks. Hope this helps ! Links below to helpful products and discount codes!
electrixebikes.com
Discount code : HAWK5 for 5% off
Pickup skf fork seals here : link soon - Auta a dopravní prostředky
I had my fastace axl13 seals replaced by a professional using the same seals and they’re still leaking. Do you know what that could be? They’re also a lot stiffer now and painful on my wrist off road
@@loopholeculture sounds like the professional wasn’t so professional. Possibly installed seals upside down , or cut the seal upon install. As far as stiff maybe messed with the clickers a bit , or too much oil in the forks. Few possibilities there. Good luck !
Hey bro, love the video. Is the part number KITG-37S?
Yessir I believe so. It’s in this vid somewhere I think that’s what it was
Worked Great !
🔥🔥🔥🔥
great how to.
Perfect vids !!!
Thank you!
is it the same for the other side?
Did you notice any difference in feel when using the 7wt vs 5w oil?
Yeah slower stroke. Would recommend if your a little heavier & do larger jumps , 180+lbs
did u end up liking the 7w oil more than 5w.?
From factory they come with 0wt , yes I prefer 7 or 10 depending on how aggressive of a rider you are.
Nice!! need to get off my lazy ass and do it lol.. Bikes look good!! is that bike set up with 16 19 ?
Yessir it is
How are they holding up compared to stock seals? I just noticed mine leaking and I’ve barely rode it
Holding up great have built 4 sets zero issues over 2000 miles combined. Maybe you put the seals in upside down or cut the seal when installing the stancion tube ? Not sure. Maybe you just got a bad seal. But I’ve had amazing luck out of them !
@@JUSTINHAWKSMITH no I bought the forks new, installed, rode on the street for about 30 km and they leak.
@@wheelie._.b I’m assuming your saying the stock form seals are leaking ? I’m advising you to install the SKF seals I’ve never had a set leak within atleast 1000 miles minimum. Usually they last longer than that. The stock ones are trash
Will this work for 1.0s?
Yes it’s the same I’ve seen other vids of the 1.0’s getting rebuilt. As far as I could tell there’s really not much of a difference in the 1.0 & 2.0
@JUSTINHAWKSMITH cool, thank you!
Welke SKF dichtingen zijn dit ? Afmetingen ? Link ?
If you watch the video I show part number in video