Instagram: progressive__e?... Facebook: / progressivee Sur Ron Mod & Fix Playlist: czcams.com/play/PL-.html... KO MOTO Playlist: czcams.com/play/PL-.html...
Yo brooo got a question. Im planning on getting a pair might go for the 1.0 38-60 progressive because I want to be able to change it from stiff to light whenever. Or should I go for the 2.0 60 pound so it’s stiff 24/7.
What is the exact cane creek headset that is the correct size for these? I just received my forks with the 60lb spring however, I do not have the correct size headset yet.
What parts did you use. I currently have the spring, and replacing the seals while I’m at it. What else will I need besides a heat gun or blow torch? Ex. Shims w/link to where I can buy or find something similar for my region.
was it a 60lbs spring that you put in it after? as you can get this with 60lbs spring from factory. I just bought it. is it any good the 60lbs spring, not used it yet
@@miguel360kmc I literally installed the 2.0 fastace forks right now and I’m running stock wheels and rotors, rippin moto is 250mm tho right? Warp 9 won’t fit fastace forks?
@@brodienelson380 The best stuff ain't cheap but I also would rather spend that and have something that is made for the application than spend half as much for a Marzzochi/fox fork that is basically a paper weight after a month when the bushings get clapped out.
Can’t wait for the next video. Keep up the great content!
I have the 60lbs version of these and they are great! if you are looking to get these forks make sure to get the 60lbs ones.
Best sur ron content. I'm watching all your stuff. Super informative.
Thanks mate 😝💪
🎉
Love the footage at the track, you almost sounded like a 2-banger! 😂
I ordered mine with a stiffer spring and have been super stoked with them over the Volcanoes 🤙🏽
Yo brooo got a question. Im planning on getting a pair might go for the 1.0 38-60 progressive because I want to be able to change it from stiff to light whenever. Or should I go for the 2.0 60 pound so it’s stiff 24/7.
@@Shortyzworldtv I got a 50 pound spring installed from Charged Cycle Works, I’m 165 pounds works great for me👍🏽
@@effinhaoli808 can you adjust the pre load and rebound?. Also what model 1.0 or 2.0 Im 140 pounds and ride 50/50 street and trails
What is the exact cane creek headset that is the correct size for these? I just received my forks with the 60lb spring however, I do not have the correct size headset yet.
What parts did you use. I currently have the spring, and replacing the seals while I’m at it. What else will I need besides a heat gun or blow torch? Ex. Shims w/link to where I can buy or find something similar for my region.
Sickkkkk
was it a 60lbs spring that you put in it after? as you can get this with 60lbs spring from factory. I just bought it. is it any good the 60lbs spring, not used it yet
To the point, Informative and honest!! Bloody epic!! What was the price point in Aus? $1200?
Thanks mate, they were just over a grand $1084.69 🤘
Do you know if there’s a significant difference between the ALX13RC 1.0 and the 2.0s?
I believe it's just steel vs aluminium construction
Anyone know of a rotor adapter that fits the fastace forks?? 250mm or 220mm
Warp 9 sells the spacers to go from 203 to 220
@@Danielxperez14 I found what I needed which was 250mm adapter and the wrap 9 didn't fit my fast ace forks didn't line up rippen moto is the way to go
@@miguel360kmc I literally installed the 2.0 fastace forks right now and I’m running stock wheels and rotors, rippin moto is 250mm tho right? Warp 9 won’t fit fastace forks?
@@miguel360kmc can u send the link to the rippin moto rotor? Id probably only get the front and get warp 9 on the rear since rippin is pricy
What spring did you have in it during testing?
Stock 35 LBS spring
Save your money for the EXT fork. It is worth it.
How much and when?
@@marrzie467 about a month and right around 2k
@@mixmastamikal 💀 i ain’t got that money
@@brodienelson380 The best stuff ain't cheap but I also would rather spend that and have something that is made for the application than spend half as much for a Marzzochi/fox fork that is basically a paper weight after a month when the bushings get clapped out.
@@mixmastamikal understandable, but for some of us, we don’t have that luxury. We make due with what we have. 🤙
Made me sad to see someone swap out bombers for crapAce forks.... A well tuned bomber fork is so much better, than anything from fa
The bushings get clapped out super fast though.
Are they stronger though?
@@brodienelson380 I'm stoked on mine. Running semi hard off road 👌 had them for 50% off, that have something to say aswell
Seen load of them leaking after 2/3 months lol
If that does happen we will definitely run a update video mate.
@@progressive_e think now u have upgraded seals they should be fine 👍💪