Video

The LBX is for children and it needs a gear box. czcams.com/users/clipUgkxc8M0EuFsA4gbFFZ0L52aC0m9cw2ClTYe?si=fSG0GChS5f1hzTGh

Are you still running the progressive spring you installed in the last video? or did you change out for the 60lb?

Buddy, can you open the Motor? I want to see how the rotor and stator are built. Please consider my request.

Do you have a link to the grip damper, my son's can apart and needs replacing and I can't find the part anywhere on the internet.

This is killing me 😂😂

I'm going to loose my mind watching every single video I can find 😮

You guys are not funny

where you got a skin ?

Can i get a link to this specific connector pretty please

what would a 22s and a 24s be in voltage?

We need a "ventus one" ultra bee. Full moded from factory.

I have the 60lbs version of these and they are great! if you are looking to get these forks make sure to get the 60lbs ones.

I know it’s English but can’t understand a word this guy says

What exactly is a cottroller mate?

Droppin those bars💥🐉

@Progressive E, Trying my luck here bro… got a 72v ko nano stock motor… randomly started getting throttle loss when landing a dirt jump… its causing me to case the following jump and have gnarly wipeouts 😂 all tilt/break sensors turned off ect… do you have a clue?

I’m trying to figure out how everyone is able to keep the stock lid with the aftermarket battery as I have my 81v on the way

Which KO controller? Would be helpful if you clarified this!

Not sure how anyone can sit through a video from these muppets

Have you got a tune for a NANO on a mx3 sting with stock bypassed battery on the android APP ?

how many pole have the surron stock motor ?

Bingo Ringo!

How tall are you? And how much are all the upgrades worth on this build?

Probably it's bcuz of extended swing arm

Link to the connectors?

Heres an actual video on the proper way to rebuild fastace forks - czcams.com/video/462Ib7F_ddQ/video.htmlsi=jc6Z7o6Bv2WWyHoD

Um you realize theres a giant nut at one end of each tube right?

Interesting the Sur Ron motor is leaving performance on the table. (1) the retention of the magnets using a screw is somewhat cheap. Not sure if I have seen that with other frameless motor designs. This is replacing magnetic material, hence you are losing performance. (2) The electrical steel that holds the magnet to the rotor is also poor design. Fundamentally, you want all the magnetic flux passing from the magnet to the stator. However putting electrical steel between the north and south poles of the magnet 'short circuits' the fields and reduces the field crossing into the stator. The issue with just swapping motors is that the tuning of the controller gains will be completely different. Not sure if people are given access to these controls.

Hi mate what colour was wire from the harness was for the DRL please ?

Sweet video guys! I am rocking the Sotion/Fardriver ST721000 (500line/1000phase) on my new build paired with the FW01 and I am super excited to see how it performs. They also have a 96v coming out soon and I am most DEFINITELY throwing that on there when it does. Thanks for these videos! Btw, great song choices during the montages! Got me adding some new guys to my library!

Talaria has a 6 pin connector coming from the power cable that connects to 4 pins of the BMS- if you use just a 2 pin QS8 how do you bypass those extra wires/ pins?

And you have dumbasses saying their 85 would destroy a modded surron

what version vesc tool is this? i have 6.02 i like your layout much better

wrecked some bomber 58s the brace split i have to get new lowers this is the only video that shows you how to do that thanks for the good video!

I've "bee,n" using a Surron L1E around town for three years now, Your take on the electric bikes is spot on. The maintenance (or lack thereof) is a massive bonus to the electric movement. After the initial cost I've had very little to fork out other than yearly rego ($216) and replacing the tires. I have had hundreds of people asking about the Surron, basically every time I take it out, and I tell them it was the best investment I ever made. I will only sell it after the Ultra arrives!

I think your chain is too tight. when your suspension wears out, your chain becomes much tighter and jerks in the shaft of the gear = kaput

LHRB is a must go! 💪

🚀⚡💪🔝

The qs 165 60h just came out. You can get it immediately if you want. It's about 900$. The xub 80 is a fantastic motor but going to require alot of work since you have to design a jackshaft. Although your pretty handy you might be able to do it.

Good Video man!!

I sold my electric conversion parts and went gas for my crf450x build. Electric is clearly better for what I need except milage. The closet town with a charging port is 15 miles. I'm quite rural here so the closet any town with gas station is. In my home village lol, 5 miles away and then 9. A gallon of gas is about 40 miles of range (I have a 3.2gallon tank) Thats the range on a full battery that will fit in the frame. I have a razor mx350 I modified with some lifepo4 batteries for my kids. It does 22mph and I'm not for sure on the range. My butt goes numb before I get even half. That in my CRF450 with 100 mile range and at least highway speeds would of worked for me. Hopefully in a few years, the battery tech will be better and I WILL switch!

Great effort, great share, love the humility…we all keep learning when we drop the ego. Keep enjoying the ride 👊🏽🧔🏻‍♂️

Is it worth it?

Change ya sprockets my boy

Hall or encorder?

Where did you get the stickers? I need it!

Why would there ever be a time when you don’t have breaks? I feel that was a bad take as you would never ride with dead brakes. That’s not a thing

installing the motor did you need KO's own motor mount for the gearbox?

That was Toria with the KO F spec and the KO Rush controller with the 72 V 56ah EDMX battery. I’ve hit 101 miles an hour. I can hold 80 miles an hour for a while, none of my sur Ron buddies can keep up but I keep hearing that Ko is not really reliable. Probably going to go to the EBMX 9000 controller. They’re running 72 V 43 ah batteries With the Thorpe 1000 controller and motor. Think he’s only getting up about 60 miles an hour maybe just a little over

Wat Size front Sprocket you run