How To Replace A Worn Front End Cv Axle Joint & Cv Axle Seal In Your Car! : G20 Cv Axle Replacement!
Vložit
- čas přidán 20. 08. 2024
- Hey guys! In this week I show you how to replace front end Cv Axles on your car. This process shown in the video is similar to most front end setups so I hope it helps you out when you are ready to tackles this job. Also make sure to watch the whole video as I show you two different ways you can remove the front end Cv Axles on your car. If you found the content helpful please make sure to give me a thumbs up and consider subscribing to my channel for more videos like this! I hope everyone has an awesome day, I will see you all in the next video!
If you wish to contact me for any reason you may do so at earaujorojas@gmail.com. You can also follow me on Instagram @ericsdiygarage to stay update and to get sneak peaks of upcoming videos!
www.instagram....
Parts from rock auto
CV Axles
Front Left; without Touring Package #391017J110
Front Right; without Touring Package #391007J110
Seals Used
Trans. code RE4F03A; Converter Housing #3834231X01
Trans. code RE4F03A; Differential Housing; Exc. Non-Slip Differential #3834231X00
Links to some of the tools used in this video
Front End Axle Nut Socket Kit
www.harborfrei...
1/2 Breaker Bar
www.harborfrei...
Music By
Joakim Karud Made in 5
• Made in 5 by Joakim Ka...
I hope everyone has an awesome day!
check out this video if you want to replace your steering wheel!
czcams.com/video/E4fFN9zSXa4/video.html
ERICSDIYGARAGE hey , did you add gear oil after change cv axle ? if you change where spot , can you tell me . this my email so easy to ask you more detail . muhammadshahfiez@live.com
i didn't add any since not a lot of fluid leaked out. you can top it off though the transmission dip stick hole
ERICSDIYGARAGE but if you know can you tell me where the spot gear oil , because i think i want to change the oil
muhammad shahfiez is your car automatic
ERICSDIYGARAGE manual
My 2000 G20t was a gift from my grandpa, and she's been a great daily driver. Thanks Eric for helping me keep her in shape!
This video was presented perfectly, right to the point with very clear and easy to follow instructions. Absolutely NO music, if I'm watching a tutorial video the last thing I want to hear is damn music playing. He's not on TV hosting of the Oscars, he's doing a tutorial video. If I want to listen to music I'll turn on my radio. You did a great job, I need to replace my passenger side and I to have a 2000 G20. Thank you for listing the part numbers and for sharing.
You just made my life easier. I've been wanting to replace the CV axle on my 2000 Infiniti G20. Now with your video, I felt like an instant expert. Thank you!
My feelings exactly! (fellow 2000 G20 owner)
thank you so much for watching!
Thank you so much - your video is the only one I found online showing me a similar model to my 1998 Nissan Primera - brilliant!!! You are a delight to follow, clear narrative, clear images, nice logical plain language - excellent!
thank you so much!
Wow, what a great video! Excellent lighting and camera work/placement, great editing, great voice-over. Clear, concise, to the point. I wish all automotive how-to's were this good. Well done and keep it up!
thank you!
Bro... great video! Clear and detailed. thank you for helping the DIY community out. Cheers.
Got both sides done this week.. Thanks for the help!
awesome glad it helped you out!
Dude I just changed my CV axle like two weeks on my G20.i watched a Maxima tutorial
@ERICSDIYGARAGE Man😃 I'm glad you did This video it helped me so much to do both my CV axle now I have my G back on the road 😎
that's awesome bro I'm glad they helped you out 👍
Hey Eric great video, I was wondering were the axle seals the same for driver and passenger side axles? Thanks.
Very informative 👍
I know this is an older video but hoping you could help. Going to change the cv axles on my 02 G20. Trans code REF03B. I can't find the correct axle seals for that code.
i love this video. im a female with the same car and same color
thank you for watching glad it helped you out 👍🏻
Awesome videos. I appreciate that you don’t have music. Where do you suggest getting the cv joints?
thank you for watching! When I was looking for rebuild kit I had a hard time finding any that included the CV joints, if it help my vehicle was driving like this for months maybe years and the joint never made and clicking noises.
ERICSDIYGARAGE Mine aren’t making any noise. I did an oil change tonight and noticed that the cv boots on both sides of the car are broken, and grease has flung everywhere. So I’m guessing I should just replace the whole joint instead of just the boots.
@@BikesandBriar if they are not making any noise I wouldn't replace them, just change the boot and add fresh grease it should be fine. In my opinion I would replace the whole unit
dude im almost buy the same axle for driver side luckly i see your video 😍 , what the length for passenger side axle ?
good job please show me how to change rear mount engine
I will re-make the engine mount video this week and I will show you how to replace all 3 mounts.
thnx brather you chanel good and best
ERICSDIYGARAGE aren’t there 4 mounts? Also, if you do the bottom 2 mounts, I recommend changing the crossmember bushings while you’re down there
Thank you for that video. Now that I have replaced the CV axle, I have to top up the transmission oil. Do you know how to do that if the top-up-screw is not possible to be removed anymore? I hard I could do it via the speedometer access point? Thanks!
Hey Eric, thanks for this great video! Love the straight-to-the-point approach and keep it up man!
One question: the two seal part numbers you provided in the description, is one simply for driver side and the other for passenger side, or are both driver and passenger side use the same seal and the two you provided are for different variants of the transmission?
they are different types this was for a non vlsd the g20t uses a different seal
@@ERICSDIYGARAGE so which one should I use for just the base G20?
the one in the video bio is for the g20 base
@@ERICSDIYGARAGE In other words, Trans. code RE4F03A; Converter Housing #3834231X01 for g20 base?
@@jiaweizhang4103 I am having the same problem. What did you end up using? I have an 02 G20 with trans code RE4F03B.
Once you had the old ones out, did you notice which side the clunking or grinding noises were probably coming from?
it was my driver side without a doubt
I need a driveshafe axle nissan primera 1999 2.0 benzin automatic . on both the right and the left. Which part of the car can I use? Because I could not earn it in my country, help me pleas
Great video as usual man! How does it drive now?
xWR3KTx All the grinding and clunking noises went away and it drives & runs smoother as well
What symptoms you were experiening with the condition of your old axles?
a grinding metallic noise
What's the torque for the axle nut?
I've found Cardone, SurTrack, YMX, QWP, Generic, GSP, TrakMotive and Omniparts brand axles on ebay. Which replacement brand axle(s) did you go with?
cardone
Will this be similar process on a q50
totally different vehicles if your doing the front it won't have cv axles unless it's all wheel drive. the rear won't be similar it will actually be easier though compared to this the cv axles bolt up to the diff so all you have to do is unbolt them and they come off.
Yo Eric I have a question bro, my driver side cv axle recently popped off it still looks intact tho it didn’t pop off while I was driving I was parked and moved my wheel all the way to the left and I heard a pop so I looked under my car and my axle was hanging. It looks like maybe it loosened over time and popped off? It dosent looked damaged or anything so I was wondering if I was able to just pop it back in?
Yes you can pop it back in and it will be fine. Under normal conditions it should never pop off. I would probably check to make sure that nothing is loose
It would be the same for g20t 2000
yes
What wheels are those bro and what’s the specs on it?!?
they are xxr 4x114 17x8.25 +25 offset
ERICSDIYGARAGE thanks man!!
ERICSDIYGARAGE just started following u on IG just recently got a G20 as a daily lol sick content bro 🔥
Is this the same way to change a rear tire axel ? I think mine bent
the doesn't have a axle it's just a soild piece
@@ERICSDIYGARAGE oh ok I'm learning due to I hit a curb 2 nights ago , and bent my right rear tire \\
I'm going to the impound today to see a better look at my car , what could it possibly be that I messed up , I know I'm going to have to get an alignment
Man I’m not looking forward to this
Not bad but I think u can do way better bro your content is a bit dry
thanks for your feedback, I am open to any suggestions.
ERICSDIYGARAGE maybe some music idk but keep up the good work
I have to disagree man...Eric is straight to the point and wastes no time. I always watch every second since he usually throws in some nice tips!
thanks for having my back! It means alot!
These instructional repair videos needs less flash and more informative content. EricDIYGARAGE is doing a fine job by revealing tips and tricks, which is crucial for making the repair job more effective (work smarter not harder). Constructive criticism from me: the video should have torque wrench values. Too many vids and backyard mechanics just go by the tighten down until is hard to turn rule and that doesn't fly with me. That's how people strip threads or have things come off (or hear clunking noises).