Fix RTX 4080/4090 Crashing & Instability
Vložit
- čas přidán 27. 01. 2023
- Have you been experiencing games crashing or blue screen of death while using an RTX 40 series card? In this video I provide some solutions that you can try to fix those issues and what worked for me!
- Hry
After 2 years of owning a 4090 and 50+ hours of troubleshooting I found a random reddit board that mentioned plugging it directly to the wall. I haven't had a game crash since 😂🔫
Nevermind, still crashing. Doing a warranty claim.
Hello Everyone!
Thanks for all the suggestions.
In my case, the power management mode was normal. I changed it to the max performance and it worked.
Got a 4090 OC today, I spent hours uninstalling, reinstalling Destiny 2, DDU to different versions of nvidia drivers, going on forums and what not, nothing worked until the power management thing, thank you brother, I super appreciate it!
Yessir!
Ah thank good, it worked for me too.
I had terrible stuttering since i upgraded to my 4080 in Destiny. I thought about bios, res bar,…
The power Management made it better, but i will also Plug my pc right into the Wall.
My destiny keep crash with my 4090 so will try this would love if it works
It took me a whole week. I tried changing settings and hardware (PCI-E 1 from 4 to 3, GPU pwr cables, G-Sync ON/OFF, changing RAM, changing nVidia drivers). In the end, the trick that worked for my 4080 was putting the Power Management mode to max performance. IMO most of Z690 motherboards (like my ASRock Z690 Taichi) have Bios' still not totally compatible with the 40XX series. Anyway, thank you for your proposed solutions.
Was your GPU going from normal operations 90%-100% to all the way to 0% for like a good 10-30 seconds or was it a different issue that you were having?
@@precursor3688I have this issue with my 4080 and run out of solutions. It stutter in the loading screens and middle of games and in cutscenes. Did you solve it bro ? If you do I really appreciate sharing .
@lgtv915 I completely wiped my computer off windows, even going as far as to install Linux to test it beforehand to make sure it wasn't just the components. Everything was solved after that. Before that I installed all drivers I could find to make sure it also wasn't the drivers.
@@precursor3688 You mean you solved it with reinstalling the OS?
@@precursor3688 so you mean after reinstalling the OS everything went fine ? Did you install win10 pro or win11 pro ? . thanks in advance
i try the power management thanks to you and now my PC stop crashing! it even crashed on the desk idling giving the watchdog error and now it goes smooth with no crashing until now and have been at least a month!
thanks for the video!
After 8 days of stress testing in various configurations, I’ve finally had some repeated passes of all tests after swapping out the CPU for a new one. Everything in this system was purchased new from Micro Center about 6 months ago. I finally got Intel to agree to an RMA so lets hope they don’t send me another faulty cpu or a refurb. I also changed my RAM from 4 dimm to 2 dimm and completely reinstalled Windows on a clean drive. I used DDU to uninstall all the nvidia drivers and then did a clean reinstall of that as well.
I can run games but when I run cyberpunk with raytracing my game always crashes
How did you decide to change cpu? Which test i have done to find problem on cpu ? My system still crashing
Just wanted to say thanks for this video. I had the same issues as you and had already tried the wall plug fix but it didn't work. Tried the power management and full screen fix and still no joy. It wasn't until I turned off xmp that my games stopped crashing. Fingers crossed that it stays fixed.
Does this work for laptop versions, just bought one with this problem.
HAd similar problem recently, and in my case I fixed it slightly upping RAM voltage and turning off security features via BIOS. Don't sure what helped, but it helped me.
Wanted to thank you. I was having issues and thought it was ram issues but I connected it to the wall and it’s been steady so far so good
I did everything but the last power step and I think it is resolved, champion
Thank you for your videos!
Running a RTX 4080 and have been dealing with this for a few months now, just switched the power management mode over to max performance. Hope this will help as I really do not want to plug it directly into the wall outlet due to power going out here on a regular basis. Fingers crossed this helps or fixes my issue completely.
As of the maximum performance option in NV panel - I assume nVidia is going to pay my electricity bills because my graphics card pulls more power than it should have in idle.
Exacly i think its really stupid that 800+ euro gpus not working properly out of box we must do things like this to fix it lol
Thanks for the video, It helped me to resolve my problem
Thank you so much, I had to change power management plan to “prefer maximum performance” and all works. But is this a driver problem or hardware issue? Is there any software fix?
If you hear or get any answers about hardware or software plz help a brotha out. Thx
@@edmina284 I heard that in the 90% of the cases it’s motherboard bios fault that hasn’t rtx 4000 compatibility
@@edmina284 2 days ago I returned my TUF 4070 ti because of one clicking fan. The new that I got is fine, doesn’t need “prefer maximum performance” etc… so I think it’s an hardware issue
im having the issue that my pc is randomly freezing and then rebooting after some seconds, i was clean installing windows and testing numerous things, its still happening. im out of ideas whats up, 4090 is 2 month old ... is it damaged already?!
Amazed at how many 4090 owners, myself included, are having issues. I've tried all sorts but it continues. Definitely going to try some of the things in this video. Funny enough, the computer's plugged into an adapter sharing power with several devices, so that'll be the first thing I try! Thanks for making this video and sharing what worked for you etc.
Have a friend that got a 3080 in his rig and have the sort of same problem.
The thing is that it always shuts down the PC and reboots instantly.
Tried reseating the RAM,s and at first that seemed to work. He said they felt kind of loose.
But the problem has appeared again sadly.
I know he have had problems with the card before and the solution is to underclock/undervolt it.
But maby the "maximum performance" is the way to go?
We tried benchmarking (3DMark) to test out and try to fabricate a shutdown/reboot.
He managed sometimes to get a shutdown but it seems to crash less (?!) somehow in benchmark than in games?
Altho if he runs the same benchmark several times he gets different results, and not a small difference either.
Everything feels "off" and "odd" of the way it behaves.
And when hearing/seeing that some have the sort of same problems with the 40 series, may it be that Nvidia have a few problems they cannot seem to sort out?
okay i did. ALL the fixes and now it’s working, now onto reverting every single setting to see what i can get away with and what not.
How did it go?
Hey mate how about you put good custom wires on gpu because those connectors that come stock junk thats why you all jump around whit it Swap Wires and see connectors are bad they expand and no connection
After few minutes of gameplay or sometimes even browsing, my screen goes black and GPU fans ramps up to the max. I've reinstall drivers with DDU in Safe Mode, updated the BiOS.. nothing worked so far. But I guess the plug straight to the wall socket will work.. I have a extension cord with those "safe brakes" on electricity spikes so I'm guessing when the GPU spikes the Power Draw, that trigers a safety "break" from the extension. Can't wait to try this when I get back from work... Maybe that's why some ppl are experiencing an improvement when they change the Power Mode from Maximum Performance to NORMAL.. Thanks for the video, great idea ❤
Let me know if that fixes it for you
I have the same issue, did you fix it? And how
@@ScarfaceXVI I think its a RAM issue.. I've moved my DDR5 RAM on different slots and switched off XMP and that issue became a very rare event. I think that overall its a software issue, not a hardware. I also switched in the Nvidia Driver the Power Management from Max Performance to NORMAL.
@@4kPcGaming Hi - I'm having the exact same thing with the screen going black and the fans going crazy. I feel like I've tried everything. Anyways, if you figure out what it is I hop you'll let us know.
I too feel like it is a software issue since it is a recent thing that it has started happening, but when I change back to an old driver and use DDU to uninstall the old driver, I still have the same issue. Is is infuriation 🤪🤬😢
@@4kPcGamingIf your screen goes black and fans ramp to the max this is known issue with sense pins in 12vhpwr cable. Sense pins are very fragile and can lose connection to the connector. You should try to use more force to and plug it more firmly so you cant see visible gap between connector. If that doesnt help try with different cable.
So plugging my psu directly into the wall outlet seems to stop my crashing.
Question is!...
Is this faulty hardware or a software issue?
I am still in my return period and I'd rather do an exchange than go through and Rma process.
Also will a simple driver update be able to fix this?
Anu help and advice for a noob like me will be appreciated.
Aloha😊
I have no idea its just what worked I don’t know why it worked lol
Tganks for yoyr video, interesting moment with plug in PC directly into wall socket. Before this I've set Maximum perfomance and it helped me to avoid stuttering in the games, also error with drivers appears more rare now, but sometimes I stll see it and I also see, that after video diver restarts GPU works not with Max perfomance settings, I see low frequencies and power consumption again. Restart OS helps.
I can't check all the methods now, because my PC not with me now, but thanks, I will try anotger methods.
Asus rtx 4090 tuf gaming, r9 3950x, 64 gb kingston RAM and asus x570 tuf gaming plus wifi.
You saved my life! Thank you :)
I just purchased CPU- I9 14th Gen 1400KS with MSI Z790 edge ti max mainboard, MSI 4070 TI Super 16GB GPU, 1250 Watts PSU, 64GB RAM 6000 Mhz, 500GB nvme samsung 980 pro, cabinet td500 cooler mater, coolent rgb for cpu with win 10 pro original OS- but till my system is getting crashed in after effects software & sometime blue screen, I tried everything again new RAM/SSD replacing reinstalling OS but till same issue comimg what should I do Pls suggest
🙏🙏🙏🙏
This video worked for me my card don't like sharing power with other appliances in a 6 socket extension lead it crushes
can you list pc specs like psu?
i had a 1080, replaced it for a 4070 ti. since then i got issues. when i play certain games, my mouse and keyboard stops working randomly. the RGB freezes and then shuts down. doesnt do it with all games. tried changing the settings that your showing here and it seemed to help but i still get the issue. im thinking of changing my power supply from 850watt to 1200w since i have a shit load of RGB. i really hope it fixes my issues.
Sounds like a motherboard issue did you try updating your motherboard.
bro im using rtx 4080 + 750w thermaltake gold , all good)
Ya i updated the bios and same issue so i also tried updating the chipset and that fixed the issue. I no longer have any problems. Purchased a 1200w for no reason XD
Blessed, that power management solved the issue thank you mann, my rtx4060ti restart problem when on idle
I’m going to have to give these a try. Cause I’m still unsure if it’s my GPU or CPU. Updated bios to the latest that is out. Turned off XMP and still have black screen of death. Rebooted and everything goes back to normal tried to stress test my CPU nothing happens runs normally. So I’m more thinking it could be my 4090 gaming x trio but I’ll give these all a try and see what’s up. My PC is also connected to a surge protector so I’ll try that first.
Update: for me it was 100% a power delivery issue. I was using custom cablemod PCIe cables and after replacing them with the factory adapter and my 3 PCIe cables it worked flawlessly. (Using MSI 4090 gaming x trio)
I really hoping it's not the cablemod adapter. That was the only way I was able to close my case :/
@@jco281 be careful with it. I remembered trying to get the cable through tiny holes and I’m pretty sure I pulled pretty hard and unevenly on the cable itself which most likely damaged the cable to not give my 4090 enough power when it needed it on certain spikes. Was able to replace it through cablemod for free and my issue was resolve!
@@JoshTheFlyGuy yeah mine only started after using the cable mod. I spent a good amount of time originally making sure it was plugged in safety but I just added a M2 and may of bumped or something. It black screens sometimes doing nothing but browsing the web.
@@jco281 yeah very possible it could’ve been damaged during transit as well. That’s what they had also mentioned to me when I had reached out to them.
Man i hope it aint this. I am using the Lian Li strimer, specifically made for 4080 and 4090. Would suck if that turned out to be the issue
This is some fucked up bios or voltage controller issue with the 4090. My 4090 Strix has the same issue and I’ve seen a lot of similiars posts on the internet with the exact same problem. The card crashes in idle, during loading screen/custcene or after closing the game. It just loses the stability after going from load into idle. Makes no fucking sense how this works when the card can run maxed out control with RT while drawing 450W for the whole day with no issue but once the cutscene plays or you leave the game the card just fucking dies and bsods the entire PC. Setting the „prefer maximum performance” in Nvidia panel seems to fix this because core clock stays locked and so does the PCIE x16 4.0 but this makes the card draw 50-70W when it’s absolutely unnecessary. I will try contact ASUS support maybe there is a bios update or something that fixes this. If not I’ll just sell this card and go back to my perfectly fine and stable 3090. Similiarly stupid issues like on AMDs 5700XT
I bought a new power supply as i thought that may fix it. As it powered om and posted at the computerstore . Xmp was def causing crashes as it was happening with my old card too. Ram is quite new fury ram one thing i havent done is plugged directly into the wall. Also going to update my bios first as i think its running on one which was ewlease before the 40 series came out. Thanks for thevtips
I had an issue when PC got randomly frozen, which was followed by a forced reboot. I had been looking for a solution for about 2 years trying all sorts of suggestions. In my case, the power management mode set to Prefer Maximum Performance completely eliminated the issue. I have RTX 4080. I think this is either a PSU or, more likely, a motherboard issue.
edit: I finally caught the bsod error and it was a memory management, and I didn't notice I had a loose ram stick
will still update after a while since I can't tell if my other crashes were also for the same reason
-----------------------
god I've had more random crashes since I installed my 4090 than I did in the last 6 years
Impossible for me to figure out if this is the gpu or not because it happens when I afk and I don't see the bsod error, and windows only throws me generic power loss error warnings
I hope this fixes it, will update later
Where the update tho
did you fixed ? tell me solution
I already updated my comment
it was dead ram sticks(somehow started after installing my new gpu??)
I have not had any issue with my 4090 :) wish you goodluck fixing yours
i got a 4080 i9 790z nothing but issues. tried so many things losing hope. games and program crashes. idk if nvidia just has terrible optimizing issues or what.
That is an awesome case! One of my favorite!
Thank you so much plugged right into wall now good to go
Mine crashes even if I’m just browsing
mine aswell, no matter what im doing its just constantly crashing since 3 days, was running perfectly for month. i just cant fix it -.- have you found a solution?
amazing, i have no wall outlet in like 4m range of my setup
I got this exact same setup and Im having gpu problems even in league of legends. My gpu’s powerdraw stutters, ie: I can literally hear the coil whine stuttering 😵💫
I have rtx 4090 sometimes all my game run at 10 fps .. i need make restart to work normally .. shoud I return my gpu and replace to new one ?
did u fixed ? issue please tell me solution
I returned an asus rog strix 4080 because it was crashing on most of the games I play, even world of tanks, forza horizon 5 etc... I play at 2k ultrawide. I have an asus tuf z690 motherboard, i5 13600k 64gb of ddr5 6000 ram. 1000 watt evga psu. I should have done more testing on it but got frustrated. Also did driver utility uninstall. I replaced it with asus tuf rtx 4080 and will see so far crashing but not as much, will go back to my 3090 if it happens. Also have a 7900 xtx (might sell)no crashing but ray tracing is minimal.
CPU: AMD Ryzen 5 7600X
VGA: Gigabyte GeForce RTX 4070Ti Eagle OC 12G
RAM: G.Skill Trident Z5 RGB 6400MHz 32GB 2X16
SSD: Gigabyte Aorus Gen4 5000E M.2 NVMe 1TB
Dissipatore: Antec Symphony 360 ARGB White
MOBO: Gigabyte B650 Gaming X AX
PSU: Antec NE850G 850W Gold
Case: Antec DF700 Flux White
I have this configuration and all drivers installed but my games are still crashing ,and idk why ready or not it performs not good,idk if it's need a better config or the game is bad optimized, i'm having a problem too with r6 it goes very good with fps but after 30 minus to 2 hours it crashes,idk what to do it,i'll try the bio stuff and the boosting performance pf my gpu
thx for the tips bro , I will let you know how it goes
same problem happend with me but the wall trick didnt work , what worked was removing the motherbord battery ( small round one located under the gpu slot ) and returning it after few mints and started my pc normaly and no more crashing
you just saved my life! almost returned my msi ventus 4080 haha *actually it still crashes, but putting the hdmi on motherboard does work for awhile.
In my case it was enabled check mark in "change ECC state" checkbox in the 3D settings. Games were crashing and freezing, I was almost on the way of returnal, but when I uncheck this option, everything became normal.
Had mine plugged into a surge protector from 5 below, was turning off every 5 minutes. Plugged it into the wall and never turned off after that, also got a higher surge protector and it works fine had no problems
Nice
it was more unstable for me with the 3080 and its rock solid with the 4090.
hi quite strange that plugging in directly reduced the number of crashes. maybe it has more power from the main or what you plugged in alongside took too much power
If it was drawing too much power the breaker should have tripped?
I thought that weird too.
If that is the case i would instead switch that extension cord out. It does something trippy if that is causing a problem.
@@TheFredrickKling not necessarily for example some plug hubs (not sure of the word) have like 2500w max allowance if you put more the breaker won't trip but you can encounter problems and even fire it's even a frequent cause of fire...for example if you plug a 2000w heater as well ..i had boot issues with an ups
@@yussef961 Well yes ofc :)
If the cords and/or "hub" is not suited for anything "over" a certain att, and the circuit/breaker allows you to draw more, it will become a problem for sure.
I live in Sweden tho so we probably have different systems/wiring, but basically, over here, "most" of the stuff is a sort of standard to what you can "draw" from the breaker.
la suède mmm @@TheFredrickKling
Like, I don't understand. I'm trying to play Black Flag and it just keeps freezing up with my 4090. I have to open Task Manager and go back into the game for it to work normally again
I have the same problem with my 4080, have to alt-tab to get a display output back. Card also only runs on PCIe 3, auto and gen 4 prevent the card from even functioning or result in BSOD. bah
Thank you thankyou. It solved my issues. By simply plug in wall 😊😊😊😊
all the games that run in dx12 crash my pc, any idea how to fix this ? reinstall drivers etc do nothing..... RTX 4070 win11
Same, did you fix it?
nop...and i even changed my graphic card...i start to think that the problem becomes from my hdd.....@@sipanalbakri6193
Nothing works. Nvidia vbios update, Win 11 fresh install, performance management max, pcie 3.0 change in the bios, HAGS on/off, then on again. Nothing! Like another person here said, the moment a user has to do all of this stuff it means the GPU isn't good. Period.
Did you try to update your motherboard or see if a component in your system is bad? I had 2 other 4080’s and a 4090 that I tried with the same issues before I resold them and this one I have now got fixed by changing my ram and plugging straight into the wall.
@@FilledWithChi11 My 4090 prebuilt pc is brand new and works fine until i put all setting to MAX on cos. Any idea why?
The first PC I got had an EVGA dual fan 2070 Super. I've had it for three years and there's literally rust caked onto the screws and parts of the heatsink because of how humid my room is.
The thing still runs like it did in 2019. You can fire a bullet into it and I'm sure it would still run just fine.
The 4070 I have now crashes after an hour and kicks me to my desktop. It's the most FRUSTRATING thing I've dealt with.
my new to do list:
plug into wall
run ddu in safe mode and clean install drivers
set to run on gpu
change fps settings
change scaling setting
turn initial virtualization off in bios
change bios pcie config
delete temp files
uninstall game/delete local game files, reinstall w/ run as admin and disable fullscreen optimization
flash new bios??
This happened to me. Suddenly all games with DX 12 started crashing immediately after start without no changes from my side. I have Zotac RTX 4090 + Intel Core i9 13900K. I solved this problem by reducing Intel's Performance Core Ratio from 55 to 52 using Intel Extreme Tuning Utility.
I've played Starfield for 3 hours with no crashing, and I have a 4090. But I let the program choose the graphics settings.
I'm still within my rog 4090 oc return period
If putting psu cord directly to outlet instead of surge protector the only way to stop crashing? does it make the gpu defective?
Should I return and exchange or do you guys think nvidia will patch this?
Someone plz help!
12900k
Hero 690
V color rog 6400 ddr5
Thor 1200 plat
Ryujin ll 360 aio
Hyperion rog case
980 m.2 samsung
Lian li uni fans and strimmers
Why would that make your GPU defective. That’s the way you should do it.
@@FilledWithChi11 I have it plugged in too a surge protector and one of the fixes recommended to directly plug it to the wall outlet.
I have never had any issues with the rog 3090 being on the surge protector.
Only recently my rog 4090 crashing like crazy and bsod
@@edmina284 Bring your PC to a professional, they will get you sorted out.
@@kenmasters916 I have all rog parts.
I was perfectly fine with the 3090 and all this nonsense started with the 4090 rog.
Everything's on stock and seems to be a common issue.
I feel at this point its hardware or software.
@Ed Mina na, that's the problem. Bring it to a professional and stop guessing. They will fix your problems or at least determine what's the issue without guessing. This is not a common issue, these are isolated issues with very few people that are having complications with everything from improper ram disposition to simple improper bios or drivers combinations. I've even seen people simply remove i cue or certain software that were causing complications. Bring it to a pro and stop guessing. If it was hardware (GPU) odds are your system wouldn't boot or you would see artifacts
Had a 4080, found a 4090 In Stock and swapped it plus some money. Not a single issue
Thanks so much full screen and direct plugging to wall worked. 😂😂😂
Glad to help!
I tried the firt two methods, the first one did do any difference, the second one made an improvement, instead of 10 minutes the game will go for around 30 minutes, then I tried your method of conecting it directly to the wall and went back to 10 minutes, so looks like I still will look for another solution, but another thing I was thinking about was my power supply, I am running the 4070ti with a 750w gold power supply, should I upgrade to a better one? maybe to a 850w or something
I think you should be fine with 750 W. My 4090 takes maximum of 450 W and i5-13600K max 200W. I have 850 W PSU, however under 1 minute of GPU stress test it crashes...
@@mlodyga5 I found mo problem, it was pretty dumb, I just did not enable the DOCP profile in the bios for the raam to run in its full capacity, that was it, but I did conect the pc directly to the wall, I'll try later putting it back to where it was with an extension to see if the problems is still there
I tried all your tips also with no success so far. Edit: Since I switched to maximum performance in the Nvidia Control Panel it did not happen again for 11 days now. 👀
Me too 😭😭😭 my first build I’m losing my mind over here same setup z790h and 4090
My ASUS ROG STRIX OC 4090 seems to never run stable whatever I try. -.-
@@Ohlukei I can’t even get my monitor to display to do it at this point . I’m stuck with the white light and I’ve bios flash . I’m losing my mind with this ish at this point
I think there was at least one manufacturer who addressed this black screen at bootup issue with a bios update@@safetrucker
What worked for me after all the bios and firmware and driver downloads and installs was undervolting the card With MSI Afterburner.
What about reseating the ram?
Good tip 👍🏼
I had a crash, I checked in the viewer, it was hit by nvdllmkm, how about you? I'm on an rtx 4090 too
same and samesies
same here@@chriseich1978
I have a 850 psu sfx and a 4080 and im played bf2042 and it keeps crashing within 6 mins. This is bullshit
Anyone having issues after flashing a different bios to their 4080? My Chrome and Edge got all glitchy and my PC randomly will restart. However, everything works perfectly in games.. I'm stumped
my 4090 msi liquid x is crashing when I start cyberpunk it sucks
Did you find a solution I been getting crashes and artifacifng
@@amarbaghel8717 hello its working perfectly now. I just formated the computer and installed latest drivers.
You saved the day!
Dude you need to put it on maximum performnce in control panel. Your gaming will be maximized
Went from 3080ti to 4070 ti super…didn’t work…new PSU…didn’t work…update bios…didn’t work…max performance…didn’t work….the Gen 3 in bios got it for me….thank you!!
is there a solution? do you have to replace it with a new one?
Any one of these could be the solution but what worked for me was at the end of the video.
@@FilledWithChi11 plug directly into the wall socket”?
@@koriorio Yes and change my ram
@@FilledWithChi11 change ram new?
@@FilledWithChi11 just replace the position or replace the new ram?
3:00 pcie gen 3 will cost a lot of performance though
Not really. Even 4090 only looses like 2-5% performance from PCIe 4 to PCIe 3...
@@Dr.WhetFarts 5% is a lot considering u pay 1800€ for a 4090
Check your event viewer, my 4080fe runs flawless stock settings after intalling some drivers
Well I fixed my crashing issue so no need to check event viewer but good advice for people who have this issue still
What did you check for in event viewer
@@redditmanllegnisthebirdofh9887 In my case the event viewer gave 3-4 different types of error: Windows, drivers, hardware and onlygodknowswhat. Not a great help.
DO NOT PLUG STAIGHT INTO THE WALL. My PC got a power spike and it killed my GPU, had to buy a new card so I went with the 4090.
Is your ram ddr4 or 5
4
Deactivating ULPS did the trick for me
What's ULPS?
4090 yeahh 200 300fps.... does it work no! Fucking hate this card😂 my old build was so much better🤦🏽♂️
You should have just started with changing the cheap Ram. Come on man
I run oloy cas 14 3600 Ram with no issues.
I’m sure it’s fine RAM for the majority of people but I personally had issues with it.
my fucking heaven bench mark is 30 fps dude on my msi suprim x 4090, and i already installed the new drivers, along with 7950x3d... what the fuck gives... ?????
i have same gpu and destiny 2 keeps crashing
I have the same issue for all games. My gpu just came in the mail last week and I built it yesterday, it crashes on all games within 15 minutes
Same problem on my 4080, seems it's stuck in pcie gen 1.1. Have you found a solution?
$2k to troubleshoot
Long sorry short plug your PC directly into the wall not a power strip and its probably bum ass ram. Im gonna swap out my ram with my other PC later and see if that solves anything and will update
swaped out ram and pulled in new outlet. Did not work for me
You have 100% RAM issue.
Hey, I dont know why and dont understand it at all. But the solution with the power directly to the wall has worked XD
Tryed every single step in this video one by one. But only the Power thing fixed the crashes completly it seems.
Thanks very much. Almost tought i buyed a broken pc. But nah its just weird shit happening somehow.
Well anyway it works now, so thanks again
It didn’t make sense for me either but maybe the 40series has better protection built into it or something.
@@FilledWithChi11 Guys, please also keep in mind (or count) how many of you are on 110V outlet - therefore 1600W PSU are max in US and Japan - other regions have 230V 50-60Hz (up to 2000W PSUs). I mean, your installations have more 'electricity' noise as I am not an electrician, but from what I saw, you have a transformer per every house? That is the problem. In other regions you have nearly 400V to the building (house of flats) and one specialized heavy duty transformer to 230V - the sine-wave of electricity is so 'correct' that microwaves does not have its own clock, but rely on power sinusoid (60hz). So max I can draw is 16Amp breaker times 230V = 3680W. But I totally agree, that this is manufacturers fault to create a GPU that when switching from high-to-low or back, flutuates so much that whole system crashes.
That means your surge protector is EXPIRED. They only last 3 to 5 years. Anything longer is hit or miss. They expire. Get a new surge protector & do NOT continue to run your expensive PC direct in the wall!
Omg. It’s not just ME ??? Phew !!! Ok.
Ive tried all of these fixes
When I had my rog 3090 I had no issues.
I put back rog 3090 no issues
But this rog 4090 continues to crash
Do you guys think it's hardware of software?
Has anyone rmad and got it fixed that way?
Bring it to a professional and stop guessing. They will fix your problems or at least determine what's the issue without guessing. This is not a common issue, these are isolated issues with very few people that are having complications with everything from improper ram disposition to simple improper bios or drivers combinations. I've even seen people simply remove i cue or certain software that were causing complications. Bring it to a pro and stop guessing. If it was hardware (GPU) odds are your system wouldn't boot or you would see artifacts
Because of this error I have been suffering with my Gigabyte 4080 AERO graphiccard for two months. This makes my life really depressed and meaningless.
Lmao
did you fixed ?
@AnimeVeriyan I fixed. The mainboard was the problem, so I went to the mainboard service center and got replaced. It works perfectly with my graphic card now.
@@StaLight I m getting random black screen then cpu fan 100% running its happening any time like browsing or watching videos, playing games so I dont know how to fix
@AnimeVeriyan Yeah you probably need to check your motherboard first.
Does your PC okay before replacing the graphic card?
The minute you do "Power Management Mode = Performance" and works for you >> Then you've a bad gpu ... Period
There is a big batch of 4090s/4080s that are bad, and all these tweeks and fixs is just away to delay the inevitable.
The newer replacement gpu that I got needed none of these tweeks and all games ... all games ... running without a single crash.
If you are crashing, and RMA window is open ... get a replacement.
I think what power management performance does is stabilize the card as to not power spike as hard. I don’t think in all cases it’s the cards fault. In my case it was my RAM and outlet I was plugged into.
BS. Prefer Max Performance means the GPU will perform at 100%, if your GPU was defective, your GPU would crash even sooner.
4090 gigabyte oc- help upgrade the gpu bios
Nermal