Front Differential Bushing Replacement | 2007 H3 Hummer 3.7L (Chevy Colorado - GMC Canyon)
Vložit
- čas přidán 4. 01. 2024
- Today we Replace the Front Differential Bushing on the 2007 H3 Hummer AKA REPLACEMENT FRONT FRAME BUSHING. Same on (Chevy Colorado - GMC Canyon). This was definitely a successful project. No more knocking when shifting to reverse and drive and smooth down-shifting.
Just a quick note: if you have a machine shop nearby, you may want to consider bringing it there and do the swap for you.
🛠️🧰👨🔧🔩⚡ TOOLS, PARTS & MATERIAL USED IN THIS PROJECT: 👨🏭⚙️🔧🔨🔦⚡
Sikawai 15773961 Front Differential Support Bracket Mount Frame Brace Axle Bushing Fit for 2006 2007 2008 2009 2010 H3 2009 2010 H3T Replace 25872770: amzn.to/3tr0Qh6
Danti 52-in-1 Custom Bushing Driver Set Transmission Wheel Axle Bearing Race Seal Installer, Remover, Press Tool Kit: amzn.to/47r4xRP
“As an Amazon Associate I earn from qualifying purchases at no extra cost to you.”
If a bushing has failed, the type of noise you hear depends on the location and extent of the failure.
Knocking, clunking, grinding or squeaking noises.
Complete loss of the bushing will cause metal-to-metal contact; you might hear clunking or grinding. If the bushing has dried out and is hard, you might hear squeaking.
• Visible physical damage. On visual inspection, the rubber of the bushings may be cut, abraded, dislodged, loose, or even missing.
Also Shifting from park to reverse an drive will have the same noise.
Torque Specs: NOTES
Crossmember Bolt
First Pass 70 N.m 52 lb ft
Second Pass Plus 200 Degrees
Engine Shield Bolt 20 N.m 15 lb ft
Frame Cushion/Insulator Bolt 115 N.m 85 lb ft
Front Differential Assembly Bolt 100 N.m 74 lb ft
Differential Carrier Assembly Mounting Bracket to Frame Bolts: 155 N.m or 114 lb ft
Oil Pan Skid Plate Bolt 20 N.m 15 lb ft
2004-2006 GMC Canyon, 2006 Isuzu i-350
Look up Similarities of H3 hummer, Chevrolet Canyon Chevrolet Colorado
Music:
Remember The Heroes by Audionautix is licensed under a Creative Commons Attribution 4.0 license.
creativecommons.org/licenses/...
ハマーh3
See HUMMER H3 Playlist for more; • HOW TO REPLACE DOOR LO...
I assume no liability for anything you choose to do to your own vehicle. Due to factors beyond my control, All Repairs you perform to your car are performed at your own risk. I assume no liability for property damage or injury incurred as a result of any information contained in this video. You can use Use this information at your own risk but Do your own research. - Jak na to + styl
Today we Replace the Front Differential Bushing on the 2007 H3 Hummer AKA REPLACEMENT FRONT FRAME BUSHING. This was definitely a successful project. No more knocking when shifting to reverse and drive and smooth down-shifting.
Just a quick note: if you have a machine shop nearby, you may want to consider bringing it there and do the swap for you.
Not a job I'd take on, but great to know how just in case I ever needed to. Well done.
Thanks Dennis! I had some help getting the tools and the rest was pretty easy. have a great weekend!
Great work! Cheers from Palma de Mallorca!
Thanks a lot!
Very useful video. Work well done! 🙂
Thank you. Glad it was helpful!
Extremely well presented, excellent voice, clear and precise, and perfectly shot video. That’s the cleanest undercarriage I’ve ever seen. Lots of pre video preparation. After watching this, I’ve gone from “er…I don’t know, this looks daunting…” to “hey, I can do that!” Thanks for the tutorial!
Glad it helped! We like keeping the engine and undercarriage as clean as possible,, it helps spotting any leaks or broken parts as well... Glad the video gave you the confidence. Thank you for the feedback!
Always wanted a Humme👍60 Gary
Thanks Gary
nice sharing. great.
Thank you very much!
Thanks you so much! 🤙
You bet!
Hi, excellent job! Like.
Thank you Enzo
Exactly what i eas looking for thank you so much!
Glad it helped! Thank you very much for the feedback.
As always good job my friend! 👍Happy New Year
Thanks! Same to You too!
Awesome job.
Thanks for sharing.
Thank you! Vivian! Have a nice week.
Great job and great how-to on replacing the differential bushing for the H3 Hummer. Quite a bit of work involved on the replacement. Enjoy your weekend! 👍
Thanks 👍 Yes, as I mentioned in the video, a machine shop with the proper press would have been much quicker... Thanks for watching.
Great Work!
Thanks!
Thanks for showing us how to do it right, thanks John!
Any time! Thanks for watching..
Thanks for sharing.. Returning Support with Full View and Like.. Man, that job looked tough.. Glad you had the manpower and the right tools.. Hope your weekend is going well.. It's been raining all morning..
Thanks for watching Allen. # pairs of hands did make a difference. Hope your weekend gets a little dry by Sunday... Enjoy.
great work
Many thanks Bob!
Looks like a fairly difficult job, not something I would likely try but interesting to see how it is done. I enjoyed following along in full to the end. Thank you, my friend.
Thanks for watching Dave. Good to know what a job like this entails so when your mechanic tells you its a big job you know how big
Спасибо большое за интересное и полезное видео! Желаю Вам отличного дня и прекрасного настроения!
Thank you
Приветствую мой дорогой друг🤗🙋♂. Спасибо за увлекательное видео👍💥💫🙏. Отличного вам настроения🤩, и успехов ваших всех начинаниях🎉🌈🌈🌈🤗👉👍
Thank you
Seems like a pretty challenging task, not something I'd probably attempt, but it was interesting to see how it's done. Thanks, my friend!👍
At the least, it helps to understand what something like this entails when a mechanic hands you the bill. Thank you for watching, my friend.
@JohnCRV Haha! You're right!😊
Great video! Would you happen to sell the tool you made to insert into the bushing?
No, sorry. We gave it to the person we borrowed the press set from.
Its not very hard to make...
Your videos are educational and lively.
Thank you
Solutions rule! Awesome! 👍
Sure is! Thank you for watching!
I have this problem of my car, we went to mechanic shop and they cant take it out. So I'm still driving it with thud sound when I back up. We have to find a better shop.
Too bad it cant be taken out.... I would Definitly get a second opinion. Hope you have a nice weekend Bon.
Wow awesome front frame bushing replacement tutorial ❤️
Glad you liked it
Where did you get this part from?
And would you happen to have the pet number
Here you go... Good luck!
Sikawai 15773961 Front Differential Support Bracket Mount Frame Brace Axle Bushing Fit for 2006 2007 2008 2009 2010 H3 2009 2010 H3T Replace 25872770: amzn.to/3tr0Qh6
Thanks man! Called AutoZone oreillys advanced auto parts and Napa and they all told me the same thing. They don’t make those parts anymore
@@tonyflores7930 One of those 3 you mentioned had to order it from their main warehouse but they wanted double the amount I paid online. Disappointing to hear that because I been going there for years..... Good luck!
A good guide to this job John
*🦘Au🪱👀fully viewed☑👍like✅have a good weekend🔆*
Thanks, you too!