How to Program Compustar Remotes:Key start or Push to Start.

if you are programming remotes involving Push to start and or Key start vehicles.
Here is the process!
Key Start:
Cycle the key from OFF to ON 5x.
You have 10 seconds to do this.
Leave the key in the ON position when you reach the 5th time.
You will here the rely click and parking light flash.
If you have 2 remotes. Follow the process I mentioned in the Video.
Push Start
Ign On
Ign OFF
Ign On and leave it
You will have 10 seconds to do this
Press the brake 3x
Once you hear the click and park lights flash.
You are now on programming mode.
Follow the steps I mentioned in the video.
if you have any questions. feel free to leave a comment.
LIKE,SUBSCRIBE, and leave a THUMBS UP or DOWN:)