I wish some more Americans mechanics had work ethic like this, most of them are lazy and do things half way or don't do anything. Then squeeze all bit of money you have. That's why I started to learn and work on my own car.
Appreciate your words, thank you. It is a place you want to respond to you as you would like but you will not be able to go overseas. Also, get a part of the MR2 is becoming difficult here as well.
Comment, thank you. You are right, I will be working very tough and there is no lift. In the past, there is experience about three times, since it becomes almost collapsed under the weight of MT, please be careful.
Hello video looked better! Are you one that supports the engine mount ?? Does it have withstood the engine without any device ?? mr2 owner and a mechanic too curious !!!
thank you for your comment. It only supports the engine mount of the head side. Work experience of the clutch relationship of SW20 has exceeded the other 3,000 (^^) v.
Mr. Takeda. I like your videos, it seems pretty easy to remove the transmission on the MR2. I am planning to change clutch on my non turbo MR2 myself. Can you tell me how long does it take you to take out the transmission? Thank you for your reply.
Thank you very much for your comment. When one in case of MR2 of N/A removes the left drive shaft, the thing Tsutomu needs and a mission element are lighter than a turbo, so it's only a difficult thing to be unstable and crazy about a clutch spline on the jack compared with a turbo. When it's done at time, and it isn't different from a turbo and is also here for 2 hours, a mission can be dropped off.
Mr. Takeda, Thank you for your reply. Now i can watch this video over and over again so that i know what do before i actually replace the clutch. Is hard to find MR2 parts in Japan? I have hard time to find certain parts here in US for my SW21 non-turbo MR2. Do you know any website that sell most of MR2 parts in Japan? Thank you for your reply.
How do you change synchro? Could it be a connection between the clutch spline and the input shaft? In that case, I will attach a large driver to the flywheel from the gap, while turning little by little, I join the MT with my fumbling condition.
Dream Theater ? Guitarist sounds like Yngwie Malmsteen...Japanese band? I love MR2 , in Okinawa I am looking to buy ! Uteimasuka??? I have the same wheels here ENKEI Racing 16 !!!
thank you for your comment. Recommended Oil, Gear MOTUL Gear Competition 75 W - 140. Engine oil is also 5 W - 40 of MOTUL 's 300 V series. Is it a ticket to the USA? What? What? What? That's a wonderful story. I am interested. However, I must get a passport before that.
おはようございます。
お褒めのお言葉、ありがとうございます。
僕が普段心がけていることは、どうすれば効率よく、しかも正確にできるか？だけです。
ただ、分解、組立という単純作業ではなく、そこに知恵を加えるようにしています。
Thank you!! I just recently swapped a S54 transmission on my 1993 MR2 with BEAMS 3SGE by following his foot steps :)
某Ｔ店ディーラーの整備士です。動画拝見させていただきました。自分もクラッチ交換やエンジン載せ替えの作業をしますがこの動画の整備士さんはほんとに手際の良い方ですね！ドラシャの切り離し方はビックリしました。自分はまだ24歳の整備士なんですが非常に勉強になる動画でした！
So quick and precise, nice job!
Wow, that was amazing! Very nice job.
動画を拝見しました。鮮やかな作業に開いた口が塞がりませんでした（笑） 3型のNA乗りで近いうちにクラッチ交換とLSDのO/H予定だったのでとても参考になりました。横置き車両の作業は初めてですが頑張ります。
先日SW20 4型 NAのクラッチ交換をしました。まず苦戦したのがメンバーの取り外し、レリーズシリンダと共締めになっているマウントの取り外しでした。私は素人ですので、作業を終えるまで丸3日かかってしまいましたが(汗)プロの手際の良さには非常に感心いたしました。
コメント、ありがとうございます。
返信が、遅くなって申し訳ありません。
ＳＷについては、もう3000台以上の経験がありますので、どのボルト？どの場所？すべて頭に入っています(^^)v。
This video is dope especially the music and how this guy made it look easy
I wish some more Americans mechanics had work ethic like this, most of them are lazy and do things half way or don't do anything. Then squeeze all bit of money you have. That's why I started to learn and work on my own car.
thank you for your comment.
There are. It's more of the companies squeezing money out of you, not the technician.
笑顔が素敵ですね(笑)嬉しいですよね！
Your words of praise, thank you!
Good video, bet that took some effort to slide that gearbox into place from up there
本物の職人 御見事 ふくちゃんとか貴方のような本物の職人の仕事視ると勉強になります 登録させていただきました
まだほとんど知識はありませんがSW20の3型または2型のGリミテッドに乗ろうと思っているので参考になりました。
I wish you had a shop in the US :-) Great work!
Comment, thank you.
In the United States, and I can not advance (laughs).
awesome mechanic he made it look simple lls
Fantastic video. Well done
Thank you very much.
Great video!
I going to do clutch on my MR2 Rev1 Turbo JDM in few weeks in the drive way with no lift. Wish me luck ;)
thank you for your comment.
SW20 is a nice car.
Please take good care of it.
You make it looks so easy...I need a car lift.
Great Vid! Skill!
thank you for your comment.
I will continue to do my best in the future!
Nice video.
Appreciate your words, thank you.
It is a place you want to respond to you as you would like but you will not be able to go overseas.
Also, get a part of the MR2 is becoming difficult here as well.
impressive work
Thanks!
BGM良いですね！
ありがとうございます。
NAのミッションバラしを友人に頼んだ事がありますが・・・まさかエンドカバー内のロックナットを外さずにデフを取り出せるとは知りませんでした。あっさりやってるように見えますが、経験と知識が無いと真似できるモノではないですね・・・参考になりました。
コメント、ありがとうございます。
返信が遅くなって、申し訳ありません。
ＮＡとターボでは、エンドカバー内のロックナットが違います。ＮＡは逆ねじですので、要注意ですね。
BGMがなんとも言えないグランツーリスモのＯＰ感
しかし手際がすげぇ
Cool video 👍
Thanks!
コメント、ありがとうございます。
ご参考にしてください。
Ｎ／Ａの場合、左側シャフトがターボより抜けにくいので、ご注意ください。
wish he had a shop here in California!
I think everyone agrees: this type of work isn't possible here in USA. I would LOVE to take my Supra over to this shop for some drivetrain work.
thank you for your comment.
I am glad if you say so.
I love your vide I wonder if you have one removing the alternator from one of this mr2 ? That will be nice to see ! Please keep making mr2 videos!
+jessie morales Thank you for your comment.
Removal of the alternator, it works by shifting the rear members in the rear.
Excelent.
Comment, thank you.
You are right, I will be working very tough and there is no lift.
In the past, there is experience about three times, since it becomes almost collapsed under the weight of MT, please be careful.
Comment, thank you.
In the future, to be able to provide a good picture, I will try!
Nice video
Thanks(^^)v
I wish that you could work on my MR2. I have that same Gen 3 motor, and parts are hard to find.
me in 2022 watching this thinking about how fire this intro was
Hi again by removing the cruse controls you mean ? Besides the manifold intake?
+jessie morales Thank you for your comment.
Removal of the alternator, by shifting the members of the rear, and remove it from the bottom.
こんにちは E-153というという型のトランスアクスルだと思うのですがその型番かシリアルナンバーは
どこかに刻印されているのでしょうか？
もしも刻印されているならばどの部分になりますでしょうか？
お教えいただけたら幸いです
よろしくお願いします
Hello video looked better!
Are you one that supports the engine mount ??
Does it have withstood the engine without any device ??
mr2 owner and a mechanic too curious !!!
thank you for your comment.
It only supports the engine mount of the head side.
Work experience of the clutch relationship of SW20 has exceeded the other 3,000 (^^) v.
Comment, thank you.
Mr. Takeda.
I like your videos, it seems pretty easy to remove the transmission on the MR2.
I am planning to change clutch on my non turbo MR2 myself.
Can you tell me how long does it take you to take out the transmission?
Thank you for your reply.
Thank you very much for your comment.
When one in case of MR2 of N/A removes the left drive shaft, the thing Tsutomu needs and a mission element are lighter than a turbo, so it's only a difficult thing to be unstable and crazy about a clutch spline on the jack compared with a turbo.
When it's done at time, and it isn't different from a turbo and is also here for 2 hours, a mission can be dropped off.
Mr. Takeda,
Thank you for your reply.
Now i can watch this video over and over again so that i know what do before i actually replace the clutch.
Is hard to find MR2 parts in Japan?
I have hard time to find certain parts here in US for my SW21 non-turbo MR2.
Do you know any website that sell most of MR2 parts in Japan?
Thank you for your reply.
Hello, this is Takeda.
It would be around 5 hours if we changed clutch of MR2.
こんなに大変でノウハウが必要なお仕事を……若い頃の私は 整備士さんに…気軽に…お願いしてたのか……（反省）
コメント、ありがとうございます。我々は、これが仕事ですから(^^)v。
コメント、ありがとうございます。
映っている整備士は、僕です（笑）。
今後のお仕事に生かしていただければ幸いです。
ちなみにインプレッサ系もお得意ですか？
俺のSW20も点検して欲しいわ…
how would you go about changing syncros too
How do you change synchro?
Could it be a connection between the clutch spline and the input shaft?
In that case, I will attach a large driver to the flywheel from the gap, while turning little by little, I join the MT with my fumbling condition.
No, I mean transmission syncros
Gear synchronization is disassembling the mission and exchanging.
What a beast...
+Luis Malo Thank you for your comment.
***** yeah bro.. how much would this cost in us dollars? ?
I'm in love with the way the work is done, not rushed, slowly, right tools, style,it's pretty awsome bro..
+Luis Malo Thank you very much.
+Luis Malo In the Japanese yen, it is about ¥ 100,000.
Songs from GT3 right XD
Dream Theater ? Guitarist sounds like Yngwie Malmsteen...Japanese band?
I love MR2 , in Okinawa I am looking to buy ! Uteimasuka??? I have the same wheels here ENKEI Racing 16 !!!
Comment, thank you.
整備士目指しています。
Oh my god. If only you had a shop in Hawaii. Anata wa kamisama O|¯|_
Comment, thank you.
If there is money, I want opened a shop in Hawaii.
Comment, thank you.
If there is money, I want to open a shop in California. (^ ^) v
プレロードはシャフトを入れたまま測られているのでしょうか？
ありがとうございます！(笑)
整備士目指しています、どうすれば貴方みたいにかっこよくなれるんですか...＞_＜
Which Gear oil and Engine Oil you recommend, and if I buy you a ticket to USA would you do all maintenance on my SW20 hehehe.
thank you for your comment.
Recommended Oil, Gear MOTUL Gear Competition 75 W - 140.
Engine oil is also 5 W - 40 of MOTUL 's 300 V series.
Is it a ticket to the USA? What? What? What?
That's a wonderful story. I am interested. However, I must get a passport before that.
Get a passport and let me know
Are you seriously saying that? What? What?
I am 60 years old old man already.
Is such a servant useful? What? What?
Not a servant but as a guest and you will be working on my car so its win win lol
Is that something like that ...?
The car is a fun, thrilling ride. Come and please try it! (^ ^) v
え・・・SW20整備性いいじゃん（ミッション単体で降りること）
AW11はエンジンを支えてやらないとミッション単体で落とせない・・・
Dude makes it look easy, gonna have a bash at this myself this weekend, i guarantee ittle be a shitshow by comparison
交換作業に何時間くらいかかったんですか？
コメント、ありがとうございます。 時間は、通常のＳＷ２０であれば（何も他に改造などがないクルマ）、およそ６時間程度ですね。 ただ、最近のＳＷは、高齢化しているのでボルトの固着などで時間を取られることが多いです…汗。
笑顔が素敵ですね(笑)嬉しいですよね！
ありがとうございます。
Comment, thank you.
Comment, thank you.