600+hp Audi A4 B5 1.8TQ TB60-03 Billet @ Speedest Glassdrive Racing 2022 1/4 mile drag race
Vložit
- čas přidán 30. 07. 2022
- 600+hp 1996 Audi A4 B5 Avant 1.8T 20v ADR Quattro (Big Turbo) @ Speedest Glassdrive Racing 2022 1/4 mile drag race on unprepared track [23.07.2022] (Estonia, Tartu, Ülenurme Airfield)
2,7-bar boost, 8300rpm rev limit, 22deg spark angle, 1,2-bar launch control @ 5600rpm, ethanol fuel. Mapped by me.
Some spec list:
- 1.8T 20v 058, ADR cylinder head (big port), ADR block
- JE Pistons 302023 81.5mm, Cr 9.25:1, conrods FCP X-beam
- Kolbenschmidt Sputter conrod bearings
- ARP M11 head studs
- FCP Engineering valve springs and retainers
- Intake valves Supertech AEVI-1103S STD
- Exhaust valves Supertech AEVI-1103S STD
- Turbobandit TB60-03 Billet A/R 0.84 T3 Twin Scroll turbocharger
- BOSCH EV14 2200cc @ 3Bar
- Precision PW46 wastegate + screamer pipe
- MAC 4-port boost solenoid
- Custom exhaust manifold T3 twin scroll by Mooseworks, 38mm runners
- ADR "J" custom machined camshafts, new stock INA lifters
- VEMS V3.3 ECU (firmware 1.2.43)
- Tenaci 4-puck clutch, SRE 3B 707 clutch pressure plate, single mass 240mm flywheel
- 01E CET gearbox
- AEM 400lph 50-1009 fuel pump
- Fluidampr
- Billet crank gear
- Simons Sprint Jap 76 exhaust
- Silver Project engine & gearbox mounts, Verkline "Race" rear differential mount
- Motul 300v 15w50 Competition
- Toyo Proxes Sport 225/45r17 tyres
....
Camera - DJI Osmo Action, 4K 60FPS
More videos coming! Subscribe!
#POV #Audi #Turbo - Auta a dopravní prostředky
Man this is where i want my audi!! Great car bro!!
Right on
and this is one of my favorite audi’s in estonia❤
Thanks bro! Next season my plan is to install stronger driveshafts, lighter wheels with semislicks, and will upgrade fuel delivery with 3 pumps, bigger fuel rail, AN hoses etc..
yes lighter wheels are doesnt broke your stronger driveshafts and with semislicks you will have better 60ft
what plans on the next season?
Cool video and awesome car. You need to slip the clutch a little bit more. I watched that last clutch dumb and you didn't slip it at all. Even if it's just 1 second of clutch movement you'll cut that 60ft down significantly. To he fastest manual cars use clutch slippers to make them more consistent, but a well trained foot can do the trick
Hey, thanks for the tip! Will try next time!
100% RIGHT ive had to learn this with my audi a4 b6 1.8t awd ...... u will no when u get the launch right seat pinning action xD
Hello my friend.. the turbo is late to work because it's big.... I feel that this engine with a maximum of 400 hp on the wheels would be the best power extracted from it or am I wrong?? I hope you can advise me on the best power that I will extract from the 1.8 turbo with the speed of the turbo work.
not for this application. but street driving and other stuff fosho 400
A single piston of those has more HP than my whole 4-Piston Car 😭
When does boost start to really come on and what rpm are you hitting full boost? I also have a .83 a/r twin scroll and boost seems to be coming on super late sometimes 5500 or later to hit 30psi
With this 60mm turbocharger I had full boost about from 4800rpm on 3rd gear. 1bar was from 4200-4300rpm on 3rd gear.
That is some crazy wheel hop you got there my friend. Seems like there is wheel hop in the front and back. Any way to fix that? It was hoping so bad your vent gauges were moving. Very bad for transmission and axles and drive shaft. Seems like something did break? Hopefully its a small repair.
Front axle spline broke (can be seen at the end of the video) . A4 b5 v6 or s4 b5 axle splines are bigger and handles more abuse. Wheelspin fixes drag slicks and better launch control tune.
@@A4B5Turbo well better luck with those axles 👍. If you can get rid of that launch wheel hop i think you will be ok. I heard 2.5 tdi axles are even stronger.
@@easycomeeasygo8901 Yes, 2.5tdi, 2.8 & s4 b5 axles are same.
@@A4B5Turbo i knew the 2.8 and s4 were the same. I was told 2.5 tdi was even stronger. I hope its true. I paid extra money to get 2.5 tdi axles. They are good for over 600tq, i was told🤷♂️. Maybe i was lied too?
Are you runing E100? E50?
E100
you will put roll cage in this car?
Not sure if next year, but yes.. Depends on wallet.
What trans are you running
01E CET
what do you think your best ET will be next season?
With perfect launch and fast shifting I think 10.5-10.9sec is possible. It's maximum for this turbocharger..
and what of topspeed will be in the finish track?
@@tomas3137 210+km/h
its gonna be fast audi💪
Launching in 2nd gear?
Gears are in reverse, because of s4 c4 linkage.
Your on the stock tranny? Or did you go 6speed?
01E 5spd from S4 C4 2.2t.
Hey mate, i love and respect your build massivly, i drive an b5 1.8T Quattro with the AEB Engine, in time ive an S4b5 differential and gearbox and an GT2876R at 320hp but on nearly stock engine, just wiseco rods/pistons other injectors now im planning on an GTX3076R Gen2 Turbo Swap could u give me some tips at building the engine and parts for that amount of Power my plan is around ~550-600hp. i know its not reliable for ever but i build it for a good time not a long time if it holds good then its awesome but i know more hp is more wear out.
Hey, just rods and pistons is enough for 600hp. Stock pistons will hold too with ethanol. Also you need ARP head studs. Will last long time, if you change oil frequently and not rev over 8000rpm..
Thanks for the fast reply, here in Germany Ethanol isnt that easy to get. And if i ask someone how to Do this and that on the car they wont answer correct they try to make as much money as they can out of the Situation and do like its a Mistery to get high hp. But that helps a lot. Also my Budget is about 5-6k for it. Saved about a year for the GTX30 Swap what could i do better like Injectors, fuel pumps, head work etc.? I just want to Build as much as for the Budget possibly to make it a bit more reliable at that Power. And sorry if i ask that much it is just how i said everyone here i ask, they wont give me one correct reply.
@@turborobbe If you plan to make it on gasoline, then exhaust valves also need to be upgraded. Factory ones are sodium filled and weak because of it. With high exhaust temperatures they will go. I'm using 400lph AEM pump on that power and 2200cc injectors. At least 1500cc injectors are needed for 600hp with gasoline to be safe.
Thanks, i appreciate it very much 🙏🏼 i will Start to upload and reply when i Start to Build it🔥
@@turborobbe No problem!
i think all these misunderstandings will be fixed and its gonna be 10second audi :DD
Still a 1.8 ?
Yes. 81,5mm pistons, so 1801cm3.
why dont u do flat shift first to second
I did. Much wheelspin and slow shifting ruined it all.
@@A4B5Turbo Do you think 5 speed 1.8t gearbox will hold 380hp flat shifting. Right now I have the same problem when I shift to second gear I loose the boost
@@serkan3621 flat shifting will tear less your tranny. 3rd gear is the weakest point in 01a. I think it will hold.
@@A4B5Turbo When I tested second to third my boost was fairly good. The problem is 1 to second takes second or 2 to load the boost. Planning to flat shift first to second only tomorrow
everything great exept you lose lots of time in the second gear
I agree. Can't shift faster, because of f#cked up gearbox linkage. Also shifting too early in this vid.. Will fix next year.