HOW TO RESET RETRAIN YOUR TPMS SYSTEM ON ANY FORD WITH PUSH BUTTON START USING PEN OR PENCIL
Vložit
- čas přidán 24. 07. 2016
- THIS VIDEO WILL SHOW YOU HOW TO RESET RETRAIN YOUR TPMS SYSTEM ON ANY FORD WITH PUSH BUTTON START USING PEN OR PENCIL
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein. - Auta a dopravní prostředky
More CZcams videos need to be like this! Straight to the point, 100% useful information.
Thanks George for posting this excellent and useful video. You just saved me money because now I don't have to take my vehicle in twice a year to have my all seasons and winter tires changed over.
Awesome bud, this video saved me a lot of drama. Their is little to no videos anywhere on these topics regarding push button start escapes. Thankyou
you are the best ..... the magnet did not work for me, but this did.
Thumbs Up amigo.
Thanks, George. Worked exactly as you demonstrated on my daughter's 2016 Explorer after rotating her tires. Got a little worried on the RF tire - it dropped about ten pounds before the horn sounded.
I put in new tps on 2016 explorer rf let it drop 13 psi never beeped
Much appreciated. This worked for me on a 2018 explorer with push button except I had the hit the hazard light button 5 times.
Super 👍😉😀
Works for me 2010 ford edge SEL AWD thankz a lot!!
😀😀😀😀 Jorge you’re the man ... very smart man Respect Brethren👊🏿 🇯🇲
2016 Edge Worked perfect! Thanks!
Thanks. This just the info I was looking for.
Thank you. It works on 2017 Fusion titanium
Worked perfect on my 2015 Edge
Thanks so much. This helped a lot and likely saved me money.
Great video! Thanks for posting it!
Dude, you are genius.
Anyway thanks a lot. It worked perfect on my mustang
is this good way in mustang 2016 with automatic transmission? How you turn on procedure in Mustang? Are you also use emergency lights?? please reply, thank you
What year your mustang was ?
Thank's bud! You saved me some money!
Thanks a lot! Very usefull video. Does this work on a 2013 Ford Explorer Limited?
Great! It worked for my Ford edge 2015! Thank you!!!
Thank you it was helpful. It works with my C- max 2013
does it work for US c-max hybrid or for European c-max? I just tried with my 2013 c-max energi but it does not work
thanks ! no bs straight clear info !!
it works ! Perfect ! Thank you !!!
Really good - thank you!
Worked on my 2019 ford ranger..note it's not keyless but it worked!!!didn't used any pen or pencil.just my nail lol
Hello friend, thank you for your video, I did everything you said, I have a 2013 Ford C-Max, but only the horn sounded with the left front wheel, the other 3 did not sound, which may be, I bought the car this month, thanks
Hi I have a ford fiesta 1.25. I have seen your video where you use the brake pedal then turn the ignition 3 times and press the brake again and then ignition again three times and the horn beeps. Then you use the scanner to reset each wheel clockwise direction. The question is could I just take air out the tires like this video to reset them or have to use a magnet
will it work on mondeo 2015 .put bigger alloys on and got that light on dash
Ford Flex 2010 with manual key. This worked for me. Thanks.
Mike Hamann did you have to turn key on and off 3 times?
Gotta do this on my transit. Thanks
did you fix your hill park assist and traction control off problem yet? dealing with the same problem, right now and pretty sure it is abs speed sensor but wanted your input since looked like you were in the same style as my customers escape 2016
Does this work with a new sensor the system has never seen before or only ones previously programmed (eg wheel rotation).
awesome help. thanks.
I have a push button start Buick encore will this work on my right now my back passages tire has reading -
I have a question I have a 2016 Ford f150 I originally had the 17in factory wheels I change them for the 20in Ford lariat wheels can I still train my sensors to work properly thank you in advance
Tried it on my 2014 Ford Escape didn't work I got two beeps from the horn while releasing air from the first tire. Do you know if I can use a retraining tool on it even though its its not required
Work on my ford maverick 2023! Thanks 👍
Thank you! I did it!!!!
If I changed two front rims in my 2014 fusion do I need to do this?
How do you know if your 2014 fiesta supports this if you don't have the sensors?
2017 MKZ WORKED perfectly TY MUCH!!!!!
Thanks George :)
Okay so when ur done with letting the air out do you still keep the car on when refilling the tires or do you have to turn it off THEN fill the tires up ?
Hi,i have a 2018 ford fiesta st line,nothing seems to happen when I press the hazard button 3 times,any ideas,thanks
my 2010 Ford fusion enters training mode but the front passenger tire doesn't trigger the horn, I've tried the process twice and nearly emptied the tire both times ... sign of a bad sensor on that tire?
Hi, does anyone knows how to know wich TPMS sensor is the faulty one? I drive a 2011 Lincoln MKX AWD with my touch. Don´t want to replace the wrong one. THANK YOU A LOT
Hello I have ford c max 1.6 diesel titanium 2011, I get notification " deflation detect OK to store Tyre pressure" , how do I reset it??
I wonder if I can do this with my Jeep. Just bought new tires now I have this problem.
my own daughter had to help me out with this till it worked! lol it actually did work. Thanks so much
Hi Christine how much air did you took out I kept going And after10psi it says restrain tire. I tried again didn't work
@@saqeeb9000 what car do you have?
@@osamahabeeb7132 2010 ford fusion se
@@saqeeb9000 yeah it didn't work on my 17 fusion
Will this also work for an 05 expedition?
Does your magnet work on this as well? just curious
Thank you so much!
Does this procedure works on my ford escape se 2015
Works on a 2016 Explorer as well... just incase someone needs that info. Great video
I have a ford Taurus 2013 push start tire pressure sensor fault light is on help
@Dickie Romans
Thanks for posting ‼️
I'll try it tomorrow 👍😉😀
Does this work on a 2008 mercury Milan premier
I tried this on a 2012 Mustang GT but it was turn key no horn beep any other ideas?
Will this work on my 2014 Bmax ?
Will this work on a 2020 F-150 Platinum edition ?
does it work in a ford 150 2012?
Thanks, George.......🙏😏
Thank you!
Nice video
What if you use another Dorman tpms from another ford vehicle on 2008 f150 5.4 tritan pickup
Would this work on a 2014 Ford Explorer (police inspector ) ?
Does this work with Fords using Key ignition ?
Unfortunately didn't work with 2015 Mustang. Any idea how to fix it?!
Thanks
How do you put the air you let out back in?
Do you have a method with a key? 2017 Ford Interceptor
Will this work on a 2012 Ford Fusion?
Will this work for 09 lincoln mks
You are god! Thank you!
I just bought 2nd hand wheels from a identical car model and got the alarm notification. Then attempted this. This didnt work. Didnt get into "training mode" after pushing the buttoms as described. But after driving for about 30 minutes the alarm notification dissapeared and the sensors started working as they should without doing anything. Car model is Ford Mondeo 2015. This is the European model of the Ford Fusion.
helo, can i do that with my ford escape 2009
What about car without push button start?
I have ford Mondeo 2015 . Thanks
Will this work on a 2022 ford escape?
does it work for Explorer 2005 ?
my mondeo mk5 shows tpms sensor malfunction ... ! How can i find out which one is it without going to a dealership?
good video! little inaccurate when it come to push button though ;)
It works on 14’ mustang???
Thanks!
How do you reset it on a 2018 Ford Escape SE 4WD ?
I have 2019 F150 but the wheel come from 2020 F150 , can I retrain those sensors to my 2019 truck ?
Tried this on my Ford kuga . Didn’t work , 2014 titanium any ideas
Did not work on 2013 Lincoln with push button start.
2004 expedition uses a magnet tpms 4L2T-1A150 ab
Does this work on the new 2021 Ford rangers?
Will this work on 2014 escape
does this work on a 2012?
Just an FYI this method of pushing brake and turning ignition on and off does not work on the 2011 Ford limited expedition. Instead you must turn the ignition to on position and then press your emergency light button 6x. The horn will honk and your display will say train left front tire ( drivers front tire ) then you have to begin letting the air out of the tire. It will honk once then move to passenger front, passenger back then finally driver back. Make sure all of your tires are inflated to the correct psi before beginning. Your display will tell you after each honk to move the next tire. In my case all of the sensors honked except the final one which is the drivers side rear tire meaning the sensor is bad.
It also works without the push button start on 2013 Ford escape sel with screen
Great video George, do you know how to replace or inspect the sensors? My car has the "tyre sensors not detected" error
Was it work for your tyre sensor not detected? Or you replaced sensor?
I have a ebay tpms light that won't train with exiter tool may try this
When do I need to retrain TPMS? After tire rotation?
Man oh Man.... Im having some issues with my 2012 Explorer Limited 2.0 ecoboost.... Maybe you or someone can chime in and lmk what I'm doing wrong.....
As you stated...
From an off position, foot off the brake, hit the start button twice. Now ignition is on, but car is NOT.
*While car is in run position (motor off) push the hazard light 3 x's - Horn Beeps... (mine dose)
While leaving ignition in the on position, goto the front driver's side tire and start deflating till you hear a beep.
(I can deflate the tire to the ground, and I get no confirmation beep,)
So I'm like F'it, and fill the tire back up.... when I stop filling tire, I get a double beep. I then check dash, and it says tire whatever sequence failed. Re-train frt left tire.......
I then do this procedure again, step by step.... and to no avail, I get the same senario????????
My only thought process is that maybe bc I have a set of 24x10 inch rims on the car, maybe that's why...????....????
SOMEONE PLEASE HELP ME... THIS HAS BEEN A HUGH ISSUE FOR ME... And I obviously can't figure this out.....
I'd be so VERY APPRECIATIVE if anyone could help me.....
Coleon@gmail.com
Thank You A MILLION TIMES, and then Some....
Frustrated in Florida,
John....
Didn’t work on my 2015 cmax push button start with screen :(
Does this work for key cars?
Can some1 confirm if it worked on a 2015+ mustang?
Doesn't work on my Kuga 2015. " Tyre sensors not detected". This is the message that keeps coming up on my screen. I can reset it but after 5-7 miles it appears again.
how about the 2008 f150 can you teach me how?
Thank you, you saved me $58.00
A shop was gunna charge you 60 bucks
How did you work that out now how about a VW?
Thank you. Very useful