@@Shanghai_Knife_Dude yes, I don't think it is a fix. But very interesting that you pointed it out. Is it a defect of some pens? Or is there a "proper" way of a justing the feed? As you pointed out in an earlier video.
@@dancrews7832 for this pen, it's absolutely normal when ink capacity is 20%-100%. It only plays funny when ink level below 20%. My guess: due to the large ink reservoir, air channel failed to pump in more air to maintain air pressure balance. I don't see it as a defect. Also, be careful, my other video is a permeate fix when you are 100% sure the ink channel too narrow, otherwise, you end up with a flooding pen.
@@Shanghai_Knife_Dude I found this video that may shed some light on our issue. Perhaps a bubble gets stuck at the base of the feeder? czcams.com/video/VEUzd0E6k0Y/video.htmlfeature=shared There is a second part that suggests using a drop of soapy water in the ink to help break the water tension of the ink and let the bubble rise out of the channel easier..
Not a big issue really. The flow issue only appears when ink level goes below 20%, which could also be easily solved by adjusting the converter. Again, this pen is too cheap to deserve a complain 🎉
I have exactly the same problem. Thank you very much for showing it on your video.
I like this knife dude
I twist down the converter to eliminate the air inside. But I don't have a lot of experience. I really like your channel! Keep it up!!!
Yes, could try next time.
I tried, it actually helped a bit. Mostly it did is pushing the residential ink into feed.
@@Shanghai_Knife_Dude yes, I don't think it is a fix. But very interesting that you pointed it out. Is it a defect of some pens? Or is there a "proper" way of a justing the feed? As you pointed out in an earlier video.
@@dancrews7832 for this pen, it's absolutely normal when ink capacity is 20%-100%. It only plays funny when ink level below 20%. My guess: due to the large ink reservoir, air channel failed to pump in more air to maintain air pressure balance. I don't see it as a defect. Also, be careful, my other video is a permeate fix when you are 100% sure the ink channel too narrow, otherwise, you end up with a flooding pen.
@@Shanghai_Knife_Dude I found this video that may shed some light on our issue. Perhaps a bubble gets stuck at the base of the feeder? czcams.com/video/VEUzd0E6k0Y/video.htmlfeature=shared
There is a second part that suggests using a drop of soapy water in the ink to help break the water tension of the ink and let the bubble rise out of the channel easier..
I was suprised there is an ink flow problem from the converter... I thought the larger converter they made looked like a huge step up for people.
Not a big issue really. The flow issue only appears when ink level goes below 20%, which could also be easily solved by adjusting the converter. Again, this pen is too cheap to deserve a complain 🎉
Part 2
czcams.com/video/-3IUm_OHeoA/video.htmlfeature=shared