Refurbishing the Brakes, Seat, Rack and More: Yamaha YFB250 Timberwolf ATV Project Part 4
Vložit
- čas přidán 21. 07. 2019
- **Yes, I noticed the captions were messed up. They were correct when I edited the video so I'm not sure what happened to them. Just pretend the first one is 10 seconds later in the video and the second caption is at the end.
In Part 4, I addressed a few issues such as the brakes, rear rack, seat cover and battery terminal. Stay tuned for part 5 where I will be finishing this project up and then doing a walk around/startup/ride video!
Subscribe!! - Auta a dopravní prostředky
Just got a 95 Timberwolf...really appreciate your videos. Very helpful.
I'm glad you've enjoyed my series! Good luck with your new four wheeler!
appreciate the videos man really helping me with getting my new timberwolf ready for hunting season!
I'd recommend getting a repair Manuel. On Amazon they are cheap, they save a lot of time troubleshooting and adjusting/maintaining your quad
i have a 96 timberwolf, thank you very much for this video, its really going help me fix everything that is wrong with my atv none of my breaks are not working, my 4x4 system is not working, battery charger is not working, CV joints are shot, my seat cover is all ripped , where can i order a seat cover?
you know what stays depressed too? i like how you had to turn the camera away from the phone when you unlocked it lmao
Don't need you figuring out my 2 letter password lol
Brake cables are very inexpensive at Caltric.
Hey , can you tell me where the two hoses on the carburetor go?
The hose coming out of the copper fitting is the fuel line and should be connected to the fuel tank. There are also a set of "vent hoses" that connect to the smaller forged metal outlets visible on the carburetor.
Where are you getting your parts from?
For your plastics I know you cleaned them up some already. But get a heat gun and go over them I’ve done it many times on my atvs and they looked just like yours.
I will have to try that in the next video. Thanks!
About to start a rebuild on my 96 timberwolf 250. Been sitting for a while. It was my dads. It's in rough shape. I don't really know what I'm doing so any references would be greatly appreciated!
Awesome! Let me know if you have any questions.
What year is the atv?
Hoping you can help me out I’ve got a 96 Timberwolf, going off what the serial number tells me. It was missing the air filter. I bought one however it seems there’s still something missing because I can’t seem to figure out how the air filter connects to the air intake. I’m wanting to say it’s the air filter guide missing now. Sound right?
Theres a few things that could be missing, could be the air box, carb boot or the cage. I can't tell by your description but if you posted a video of the quad I'd be happy to watch it and tell you.
Can you please tell what what all will fit my 250 it's a 94 4*2 an the front wheels on it are not the rite one it's a project bike as well couldn't find the first two parts of your stuff
Is there any writing on the front wheels? And how do you know that they are not right? If you are looking for tires and the rims are stock, you should be able to go on a site like Motosport and enter your year, make and model and it will show you which tires will fit.
wow i have never seen a yellow wolf