@@lukewill1187 I just didn't replace the filter. I genuinely think they slightly changed the design of the new ones to not work on some old fridge models. I bought them from multiple places, same issue. Problem will be fixed once I replace my fridge I guess
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
Help, the filter doesn't click into place like it usually does.. and the eject button is all the way out even without any filter in, is something broken? (I'm using a brand new everydrop filter 3, as always). Any help would be much appreciated!
i just replaced this exact filter but now the water doesnt flow anymore. Any suggestions? i pop the filter out and water works, put it back in and its jammed again...
Hi Jay, we are sorry fro the frustration you are experiencing. Please email us at Whirlpool_Digital@Whirlpool.com with your name, address, phone number and model/serial number along with a brief description of what you are experiencing so we can best assist.
My problem is that I can't see why I need an expensive filter if I'm using city water that is treated. I am concerned though, about leaving an old filter installed as it could be actually getting my clean water dirty. I'd take it out but I suspect that would let water run inside the fridge. Anybody know the answer? I wouldn't trust the company to answer truthfully... they're just interested in selling filters.
When you push the button and pull out the water filter, an internal valve automatically switches to bypass the water filter. A lot of people with under-sink reverse osmosis water filters (which are plumbed to feed the refrigerator as well as a skinny spigot on top of the sink) simply remove this filter as it's no longer needed. Then they take the large round cap off the end of the filter (as it's actually part of the lower grille/kickplate at the bottom front of the fridge) and wrap the outer perimeter of the cap with several layers of 1/2" wide masking tape and then stuff the cap back in the hole in the grille to restore the lower grille to it's previous appearance.
Why does my water contain so many particles? My cheap Brita filter cleans my water much better then this. I followed the steps thoroughly and still the water isn’t clear. A brand new filter should clean water.
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
Just bought 2 of these filters and I am having the same problem as everyone else. Yes, I know how to install it correctly, have had the frig for several years, install new filters every 6 month.. Put the new Every Drop filter in and the jackhammer noise begins, try to run the water through the filter and the stream gets smaller until it's completely stops. Put the old blue whirlpool filter in again and all is well.. So something is wrong with the design or defective filters. I already spent my money on these filters, have none left to purchase more, So now what? Every Drop Filters will you be me with your product?
Fix: For my frig. On the filters end that fits inside the frig there are 2 stems with orings and one prong with nothing on it. The one prong needs to be trimmed, it's too long. Compare with the filter you are replacing so you don't trim to much off. My wording may not be the best, but I hope this helps someone.
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
extremely helpful vid. Thanks
Whirlpool EDR3RXD1 Everydrop Refrigerator Water Filter Amazon
www.amazon.com/gp/product/B00UB441HS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00UB441HS&linkCode=as2&tag=pdf44-20&linkId=0877105b375b2d24195ca09cc31c75e8
My water testing level of contaminates is 480 in red with this water filter do they really work
Es los mejor de la tecnología
button seems to be stuck in the eject position
filter is leaking in the floor after replacing
What refrigerator is that?
2020 and I'm having the same issue as everyone else. No water flow out of new filter. Bought one on Amazon, one at home depot.
And here I thought I was the only one with this problem...originally attributed it to user error
What did you do to fix it? I'm having the same problem
@@lukewill1187 I just didn't replace the filter. I genuinely think they slightly changed the design of the new ones to not work on some old fridge models. I bought them from multiple places, same issue. Problem will be fixed once I replace my fridge I guess
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
You should lift up the ice maker bar so your water doesn’t come out where the filter was removed.
Know how to install a water filter but we only have an ice maker. How do you run 4 gallons of water thru an ice maker?
2 buckets of ice
Mine keeps popping out.
Help, the filter doesn't click into place like it usually does.. and the eject button is all the way out even without any filter in, is something broken? (I'm using a brand new everydrop filter 3, as always). Any help would be much appreciated!
Try this: czcams.com/video/kg9cctDcxME/video.html
i just replaced this exact filter but now the water doesnt flow anymore. Any suggestions? i pop the filter out and water works, put it back in and its jammed again...
Hi Jay, we are sorry fro the frustration you are experiencing. Please email us at Whirlpool_Digital@Whirlpool.com with your name, address, phone number and model/serial number along with a brief description of what you are experiencing so we can best assist.
Try folding a paper towel and putting it at end lets valves seat better
I just bought this exact filter an hour ago, replaced it and the water just stopped flowing
Angelica, when the filter was replaced, did you try flushing out 1-2 gallons of water through the new filter?
EveryDrop™ Water Filter yes, I was doing that when it started flowing less and less water and it just completely stopped
My problem is that I can't see why I need an expensive filter if I'm using city water that is treated. I am concerned though, about leaving an old filter installed as it could be actually getting my clean water dirty. I'd take it out but I suspect that would let water run inside the fridge. Anybody know the answer? I wouldn't trust the company to answer truthfully... they're just interested in selling filters.
You can still use it w/o the filter. The purpose of filtering is to eliminate chlorine that they use the treat city water.
When you push the button and pull out the water filter, an internal valve automatically switches to bypass the water filter. A lot of people with under-sink reverse osmosis water filters (which are plumbed to feed the refrigerator as well as a skinny spigot on top of the sink) simply remove this filter as it's no longer needed. Then they take the large round cap off the end of the filter (as it's actually part of the lower grille/kickplate at the bottom front of the fridge) and wrap the outer perimeter of the cap with several layers of 1/2" wide masking tape and then stuff the cap back in the hole in the grille to restore the lower grille to it's previous appearance.
Don"t forget to bring a towel.
Why does my water contain so many particles? My cheap Brita filter cleans my water much better then this. I followed the steps thoroughly and still the water isn’t clear. A brand new filter should clean water.
Same, did the water ever clear up for you?
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
Maria you saved me big big headache! Thank you!
That was easy thank you so much!
Just bought 2 of these filters and I am having the same problem as everyone else. Yes, I know how to install it correctly, have had the frig for several years, install new filters every 6 month..
Put the new Every Drop filter in and the jackhammer noise begins, try to run the water through the filter and the stream gets smaller until it's completely stops. Put the old blue whirlpool filter in again and all is well.. So something is wrong with the design or defective filters.
I already spent my money on these filters, have none left to purchase more, So now what?
Every Drop Filters will you be me with your product?
Whirlpool Everydrop Refrigerator Water Filter Amazon
www.amazon.com/gp/product/B00UB441HS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00UB441HS&linkCode=as2&tag=pdf44-20&linkId=0877105b375b2d24195ca09cc31c75e8
Water filter
Same problem here. These filters are junk. May just install an in line filter for a whole lot less money.
Fix: For my frig. On the filters end that fits inside the frig there are 2 stems with orings and one prong with nothing on it. The one prong needs to be trimmed, it's too long. Compare with the filter you are replacing so you don't trim to much off. My wording may not be the best, but I hope this helps someone.
For everyone having a problem with low or no flow after installing a new EveryDrop Filter 3 this simple fix worked for me: czcams.com/video/kg9cctDcxME/video.html
Water stop flowing
V😊❤2😮 2:21