How to replace whirlpool Refrigerator water filter
Vložit
- čas přidán 12. 07. 2024
- If interested in purchasing this filter, visit our Amazon affiliate link below.
amzn.to/3ca30F1
😎👍🔧🔩
1. Install Reverse Osmosis System
• How to install GE Reve... - Jak na to + styl
![How To Replace Whirlpool Refrigerator Water Filter [Easy]](http://i.ytimg.com/vi/XHuhAQanP6Q/mqdefault.jpg)
If interested in purchasing this filter, visit our Amazon affiliate link below.
amzn.to/3ca30F1
😎👍🔧🔩
How do I get the filter out without the cap being on it???? My husband usually does this but he recently passed away and I found a new cap in the drawer. I figured out how to put it on the new filter via your video but I can't get the old filter out. Please help.
@@ChiquitaMillerNolan
Thanks for watching, sorry to hear about your husband. That’s not easy.
We appreciate you reaching out to us. You can carefully press the quick-release mechanism that the cap fits onto.
You may need to apply a good amount of friendly inward pressure for the filter to release.
👍
THANK YOU for NOT taking 30 minutes to explain a 2 minute procedure. GREATLY APPRECIATED
You are very welcome, thanks for watching. 😁👍
I agree! I hate that! Wordy videos are super annoying!
But how else am I supposed to find out the history of water filters, why water filters are necessary, the CZcamsr's personal history with water filters, etc? I mean isn't all of that crucial information for changing a freaking water filter? 😂😂
My husband went to heaven on January 7. He always changed our refrigerator water filter. I know it sounds silly, but even changing the water filter feels huge to me. Thank you for this video that helped me change the water filter tonight. :)
You are very welcome Jackie, sorry to hear about your loss. We will always be here to help answer questions, you will never be alone!
Never hesitate to reach out to us with any DIY project questions, we all need to stick together!
Thank you so much for watching & sharing this. 😎👍
@@DIYwithMichaelBorders Thank you for your kind words.
I am in the same position you are, I call myself, "Jack of all trades".
Great job and you didn't take 45 minutes to explain a 5 minute job.
We appreciate that & that’s our goal...straight to the point. Welcome to the DIY Raptor Club. Let us know if you have any questions. Us fellow DIY’ers need to stick together!
Enjoy your night. 😎👍🔧🔩
@@DIYwithMichaelBorders So nice you replied to my reply, shows your quality as a person. I want to share a DIY story. The side by freezer was peeing on the floor from clogged drain tube, when I got into it there were frozen peas clogging the drain. Asked wife? She replied yes, some peas fell out of a bag of frozen peas. If we find out about the little things it can or could have prevented a much more complicated problem. 🎖🤩🤔
@@flouisbailey
Thanks for the reply & that is to funny. 😆. That is a great point. Great find though on your behalf, well done!
😎👍🔧🔩
So easy to learn things on CZcams! especially for women who don't even know where the filter is located!! Thank you! It has to have the number 3 on it to replace this type of filter. Mine is a Whirlpool.
Hi Lordy, thanks for watching. CZcams is definitely an incredible source for many things.
We are always here to help answer questions, hope all is well with you and your family.
😎👍
Worked like a charm. That's one more item to miss going on the home inspection report. My girlfriend is so impressed. I am leaving the old canister for the new buyer rather than throwing it out.
Thanks for watching & sharing this.
I just bought a new house That came with a refrigerator and fortunately the correct replacement filter. I'm sure I could have figured this out in 5 seconds but I watched your video just to be safe. It was a five-second project. I think people probably don't properly align the filer when they put it back in. My release button really had to be pushed in hard and it ejected nicely. Thanks.
Thanks for watching & welcome to the DIY Raptor Club. We really appreciate you sharing this. We think you’re spot on...alignment is key!
Let us know if you have any questions, us fellow DIY’ers need to stick together. Congrats on the new house.
Enjoy your night! 😎👍🔧🔩
Thanks so much for the video. I just changed the filter on my fridge. Easy to the point instructions! You have made a great video! 👍👍👍
That’s very kind of you to share, thanks for watching. Enjoy your day. 😁👍
Thanks so much for the video. I just changed the filter on my fridge. Easy instructions 👍👍👍
Awesome. We appreciate you sharing. Us fellow DIY’ers need to stick together!
Hope all is well. 😎👍🔧🔩
Very straight forward and clear instruction....no unnecessary talk. Great job bro...loved it.
Hi there, that’s our goal. Getting you the info you need without wasting your time. Thanks for watching. 😎👍
@@DIYwithMichaelBordersThanks for the info but does anyone know how to reset the red light indicator inside the fridge part ? It still shows red after installation.
@@alanbyrd1940
Thanks for watching, it may be as simple as unplugging refrigerator and leaving unplugged for a minimum of five minutes. This will allow system to reset.
After five minutes, plug refrigerator back in and hopefully it will have returned to normal configuration and you will be good to go.
This is the EXACT same set up/location as my fridges filter....GREAT JOB, THANK YOU!
We really appreciate that, thank you. Reach out to us any time! 👍
Love that this is short, sweet, and to the point. Thanks.
We appreciate you sharing this. Short, sweet, & to the point is our goal.
If interested in purchasing this filter, visit our Amazon affiliate link below.
amzn.to/3ca30F1
😎👍🔧🔩
After days and days, I decided to go into CZcams, Thank You DIY!! It took seconds to finish what I was doing!! Thanks
Great to hear & we appreciate you sharing this. CZcams rocks!
Clear, precise and quick. Thank you!
Good morning & welcome to the DIY Raptor Club. We appreciate you sharing this. Clear, precise, & quick is what we like.
Let us know if you have any questions, enjoy your upcoming weekend.
😎👍🔧🔩
Thanks for the video. Mine seemed to be clocked a bit ccw but I got it bled, light went green, all good now.
Thank you! Made this super easy, unlike the actual manual.
You are welcome, and thank YOU! The manual can be a bit confusing. Let us know if you have any questions and hey if you’re into crypto trading, check our our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time. 🧰
Omgosh! So simple! A friend changed it for me but he’s not talking to me….so I had to change it…..and what a mistake. I removed the black grill now I have to figure out how to snap that back. Thank you for this simple tutorial! ❤
Thanks for watching and sharing. Keep us posted, be extra careful as you align the lower ventilation panel back into place and secure it into its respective clips.
😎👍
@@DIYwithMichaelBorders so filter installed however the red light still on. I pushed switch in as noted approx 10 times, held the switch in and light is still red. What am I doing wrong? Thank you!
@@maryridchuk1292
Thanks for the follow up, a quick reset may fix issue. The refrigerator can be reset by unplugging it and leaving it unplugged for a minimum of five minutes.
Thanks from a USMC veteran in Tennessee!
Good morning john, welcome to the DIY Raptor Club. We appreciate you watching & sharing this. God bless you for your service to this country.
Let us know if you have any questions, hope all is well with you and your family.
😎👍🔧🔩
@@DIYwithMichaelBordersYou’re welcome buddy and I’m back for a refresher course on this filter again! Lol
@@johnsmith2598
Hey john, welcome back. Hope all has been well.
Just needed those first 10 seconds. THANK YOU
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
So happy to help, enjoy your weekend.
😎👍
Thank you so much for the video! I love being independent and doing things myself, around the house.
Thanks for watching & welcome to the DIY Raptor Club. Great idea & it’s always a rewarding feeling.
Enjoy your day. 😎👍🔧🔩
Thank you so much for posting this video. VERY helpful.
You are very welcome, so happy to hear it was helpful. Enjoy that fresh clean water. 😎👍
Excellent video, short and sweet. Great job 👍
We appreciate you sharing this Mario, enjoy your upcoming weekend.
Thanks for watching. 😎👍🔧🔩
Great simple presentation!
I would add that if your refrigerator is not very new or if it's been an excessively long time since the water filter was replaced, have some old towels and paper towels at the ready. The filter cartridge might have a hard time releasing when the button is pressed, or the new cartridge might have difficulty engaging when it is pushed into place. When this happens make sure it is aligned correctly (lettering and #3 on filter pointing straight up) and push extra hard. If it is only partially (but not fully) engaged, the button to the left will not pop-out and a large puddle may emerge from under the fridge.
We want to thank you for taking the time out of your Tuesday afternoon to share this, we really appreciate it.
Any and all helpful info is greatly appreciated. Again, thank you! 😎👍
Thanks! I could not get the side tab to pop out until I was a little more forceful and gave the filter “a running start”!
@@anniegalindo9556
Hi Annie, thanks for sharing this. Great to here you accomplished your DIY project. Adding a little extra friendly pressure sounds like it did the trick.
Enjoy! 👍
Thats what happening to mine. I won’t pop up. Any tips?
@@thamisantos7165
Thanks for watching, what most have experienced is adding a bit more friendly inward pressure on release button works best.
tysm! this was easy and simple to understand, and you helped a lot.
So happy to help, thanks for watching.
Thank you a very good video I was able to change the filter 👍🏼
Hey Sandra, you are very welcome. Thanks for watching, enjoy your weekend. 😎👍
Awesome vid
Great / Quick description
THANKS
Thanks jody, we appreciate you sharing this. Hopefully many stress free days ahead for you.
😎👍🔧🔩
Thank you, it was very helpful.
Helpful is our goal, thanks for watching. Hopefully many stress free days ahead for you.
😎👍🔧🔩
Awesome video straight to the point.
Hey, thanks for watching. That’s our goal!!! 😎👍
Thank you. A very informative video.
You are very welcome Denise, us DIY’ers need to stick together! Thanks for watching, hope all is well.
😎👍🔧🔩
A few additional items that I keep on my checklist:
1. Flip up the 'full' detector in your icemaker to prevent any water from the new filter getting into your ice before it's flushed.
2. Flush 4-5 gallons of water through the filter before using it. Water straight out of an unflushed filter is not safe to drink.
3. While you're down there with the filter... Pull off the lower skirt where the filter is, and vacuum the coils under the fridge. Dust impedes its efficiency.
Thanks for sharing, we always welcome feedback and advice. We appreciate you taking the time to share this.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
4-5 gallons?! The filter is only good for 200!
@@willing_spirit6830 - Most refrigerator filters state they are good for 500 to 600 gallons.
Thank you so much. It was a great help.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
You are very welcome. Thank YOU for not only watching, but taking the time to share this. 😁👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Lifesaver. Thank you!
What’s up Tony, we appreciate that. Hope all is well.
Thanks for watching. 😎👍🔧🔩
Thank you for this!!
You are very welcome Lacey, thanks for watching. 👍
Thank you! Easy peasy!
You are very welcome, hope all is well.
😎👍🔧🔩
Wow…!!!!
Thank YOU For Helping Me…!!!!
Jeff, you are very welcome. Thanks for watching & sharing this, hope all is well.
😎👍
Thank you for the help!!!
You are very welcome, thanks for watching. 😀👍
very helpful. Thank you!
Hi John, you are welcome. Thank YOU. Hopefully the filter replacement went well. Let us know if you have any questions.
Hey if you’re into crypto trading, we just launched our new platform website.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Thank You! When my new filter had a rounded bottom, always had flat bottoms, I as concerned it wouldn't fit. Hoping it does.
You are very welcome, thanks for watching. 😎👍
ThanksI Helped alot.
Thanks for watching & welcome to the DIY Raptor Club. So happy to help. Us fellow DIY’ers need to stick together!
Enjoy your night Jean. 😎👍🔧🔩
Half the battle is knowing where the stupid thing is lol! Nice easy instruction video. Thanks!
True...😁...we appreciate that & thanks for watching. Enjoy your weekend.
thnaks you saved the day for me:)
Awesome, we are happy to help. 😁
Let us know if you have any questions and hey if you’re into crypto trading, join our newly launched DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Thank for the help
You are welcome Fernando, thank YOU! Let us know if you have any questions and hey if you’re into crypto trading, join our newly launched DIY ecosystem.
toolboxtoken.com
Reach out to us any time. 🧰
Thanks you for the video
Great video!
Thanks for watching Carole, we appreciate that. Let us know if you have any questions.
Hopefully many stress free days ahead for you.
😎👍🔧🔩
one step not in the video...run 2-4 gallons of water throught the new filter to remove all air and to flush all the loose charcoal out of it.factory also suggests you shut your ice maker off so icemaker doesn't call for water before you are finished flushing the filter
Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your advice. Enjoy your day.
😎👍🔧🔩
@@DIYwithMichaelBorders Do you reset the filter before or after you flush the new filter.
Thank you for the help
What’s up Bryan, you are very welcome. Special thanks to you for not only watching, but taking the time to share a common. Both of which mean the world to us.
Let us know if you have any questions, enjoy the rest of your Sunday. 👍
Thank you so much!
You are very welcome Teresa, thanks for watching. 😎👍
Don’t forget to flush 4 gallons of water through before use! 👍🏻
Thanks for watching & sharing your advice.
😎👍🔧🔩
how
Bro thank you so much
You are very welcome, thanks for watching. 😎👍
Thanks for the info
You are welcome, and thank YOU!
Thank you...it helped
Thanks for watching & sharing this, we appreciate it. 😎👍
Thank you🙏🙏🙏
You are very welcome, thank you.
Thanks dude 👍
You are welcome, thank you for watching. 😁👍
💕Ooohhhh Thank U 😂cause I was lookin in the fridge & freezer🤣🤣🤣
You are very welcome, thanks for watching. Enjoy your weekend.
😎👍
Hi.. thankful for ur video
Kindly please I would like to know what for this filter n what job it do.. thanks
Thank you.
Hey Jim, thanks for sharing this on your Wednesday morning. Let us know if we can help answer any questions.
Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Thanks, man
Happy to help, and reach out to us any time. Hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
I may be late on this but thank you very much
You are very welcome, thanks for watching & sharing this.
Enjoy your upcoming weekend.
😎👍
Thank you short precise and American speaking. Right to point perfect outline got filter changed
Thanks
Hey there Veronica, you are very welcome. Thanks for watching.
Michael: Good time to Take Off Kick-Plate and Clean the Condenser Cooling Fins;
Vacuum Brush and Crevice Tools Not Small enough to Reach the Back
Suggest an Affiliate Link for a Brush/Wand
Some Kits Include Clothes Dryer Attachments . . .
Thanks for watching & that’s a great idea. Soon after this project, we replaced condenser fan & did a serious vacuuming session. 😁
Much cleaner now. Hope all is well.
😎👍🔧🔩
The filter eject button doesn't work. Do you have any suggestions for what to do about it? Really appreciate any insights
Thanks for watching & that’s odd. Two thoughts.
1. It’s possible that the button needs to be pressed a little firmly.
2. The filter itself is not inserted properly and may be stuck not allowing the eject push button to work.
Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Im having the same problem..the button is stuck and i did both options and it doesn't work ..any other suggestions ?
Thank u
Gracias
You are very welcome, thanks for watching. 😎👍
I appreciate your clear explanation and instruction. ...I have a question, though. What can I do, the filter doesn't come out (stuck?) when I push the button left to the filter? How can I unstuck it? Do you have a video about it?
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
This is more common than you think. Most people have shared that by adding a bit more inward pressure on release-button may be all it needs.
If the filter currently installed is not the perfect compatible replacement size, it may be jammed and will need that extra friendly pull.
@@DIYwithMichaelBorders Thank you for responding to my post -- I have tried, but it didn't do anything. I pushed harder, inwardly, too, but the filter is still there, didn't make any noise or anything. The filter light is red for a while, and I want to change the filter. I bought the right model off Amazon, too (thank you for the link). Who do I call locally? Whirlpool technician?
@@NJ-xyz13
Thanks for the follow up, we recommend contacting both a local plumber as well as a local Whirlpool technician to get a few quotes.
In most cases, the Whirlpool/appliance technician will be a bit more expensive but will be better familiar with getting that old filter out and a new one installed.
😁👍
@@DIYwithMichaelBorders Hi Michael -- I forgot to ask one more thing -- how much is reasonable and how much is too expensive then???
@@NJ-xyz13
Thanks for the reply, are you referring to amount of inward pressure on button or filter price?
Inward pressure limits are tough because you want to get it out…but also not damage anything. Filters on average cost between $30-$60.
If it’s still jammed, you may want a friend that’s familiar with plumbing to help…or contact a technician.
Chrisfix doing appliances now very nice
Thanks for watching.
Just a question. Once you replace, do you need to wait a little while, for the water to get aquatinted to the refrigerator? I just changed mine and when I tried to get water, there were particles in the water. Thank you!
Thanks for watching, some will fill a few glasses or a pitcher full and dispose of it prior to drinking from there.
😎👍
Thank you for the vid. But how does one eject the old filter if the black cap is gone? Mine chipped & the 2 replacements I found don't seem to fit/ lack onto the old installed filter.
Good morning, thanks for watching. You will have a release button to push which will release old filter from housing. Please keep us posted on your project.
@@DIYwithMichaelBorders same issue here mine is missing the cap and the release button won't work
Same problem here filter is stuck 🤷🏻♀️
Ok same here! I just took off the bottom grill face and used a screwdriver to gently pry the filter out you have to jiggle it a little back and forth to get it to move then it eventually popped out. Make sure to clean all the lint off the coils to right while you are it it!! Mine was full!!
@@spentang1
Thanks for watching & sharing this Stephanie. 😎👍
My new filter stopped working after 1 month. Water comes out fine if I take filter out. Also, if I push on the filter, it works. Any ideas on what could be wrong ?
The best
Hey thanks, we appreciate that. Thank YOU!
Do you need the filter cap in order to hear a click? We moved into a new place and there just isn't a cap for the fridge.
It's hard to even try to get the filter out - when I hit the button nothing happens. And I'm not sure how to take off the filter to even see what might be affecting it. Please help!
You really don’t need the filter cap at all so you’ll still hear the click without it, the only purpose of the cap is for making it easy to remove the water filter.
Just press the eject button down all the way and pull the filter out.
If it’s stuck then you might need to hold the button down while you’re trying to pull the filter out, you could also try using pliers or a screwdriver to try and get a grip on it.
@@callofdutycrazyfreak
Thanks for sharing. 😎👍🔧🔩
@@callofdutycrazyfreak I have the same problem, the cap won't fit on the filter to even allow me to get a good pull on it, and the button won't push in at all. I take a screwdriver and push the filter to the side and the button then pops out fully, but when I push it in, it is pushing against a piece of plastic on the filter and won't go beyond that. I have the right filter for my whirlpool, it's a hassle. Can you do a video on a stuck filter, or at least show us up close what it looks like when the button is pushed in vs when the button is popped out so we can see how it is pushing in, if we have to push harder to go against the piece of plastic on the filter? I don't have that strength to push it any farther. Thank you.
Remove the Plastic Grill....
Open both doors and pop the Grill off on both ends....
You will have perfect access to the Filter now....
Hi! I have the same fridge. I would like to use filtered water and a flow jet pump to supply the water to the fridge. I wanted to know where to find a dummy filter to bypass the filter system or if I even need a dummy filter. Thank you!
Thanks for watching & welcome to the DIY Raptor Club. We are not sure unfortunately. Unfamiliar with that operation.
Enjoy your night. 😎👍🔧🔩
@@DIYwithMichaelBorders thank you!
@@lamela2105
😎👍🔧🔩
I have a somewhat similar situation, with a Reverse Osmosis system (under kitchen sink, with built-in plumbing going under the floor) feeding the refrigerator water/ice maker. I just use the refrigerator filter anyway, but instead of replacing it every 6 months, I replace it about every 18 months.
DO not throw away the old filter until you check to see if the new filter replacement works, Just purchased /just attempted to change old filter for new and the new one didn't work. It would only work if you held / pushed in on the new filter. Double checked the part numbers and the Whirlpool number 4396841 Everydrop Equivalent number EDR3RXD1
Thanks for sharing this advice, great idea. 😎👍
I changed my filter as per your video but it had water squirting out the holes as soon as I pulled old filter out. I put new filter in and no more water leaking and it seems to be working fine. Why would I have water squirting out like that?
Thanks for watching & sharing your experience. This can happen when your internal valves get stuck. Once filter is pulled out, the valves should close to not allow water to leak out. Some will replace the internal part that the filter feeds into...while others will just shut off water supply to refrigerator each time they replace filter.
Hope all is well. 😎👍🔧🔩
@@DIYwithMichaelBorders I have the same problem and now after replacing the filter, the water dispenser is very slow, why ?
@@kitkatj1958
Hey what’s up, a special thanks to you for taking the time out of your Thursday afternoon to share this comment, it means the world to us.
It’s normal for a new filter to have an ever-so-slightly less flow of water. This is because a brand new filter needs to be broken-in a bit.
However, if it’s been a day or two, and you are still experiencing slow water flow, that’s not normal.
Did you install the exact same replacement model filter as was previously installed? If water shutoff valve was closed, ensure it is now in the full open position.
😎👍
I just replace day filter and now the water trickles through spout. Returned and got another and now same issue. Remove filter and it flows fine.
One thing not mentioned after you install the new filter you have to purge out the new filter to remove all the air....Use a largest glass you can get into the water dispenser and get some water it'll pop a lot of air make note to turn the water off at a half glass of water. Sometimes even though you stopped filling the glass the air and water will continue for up to 5 more seconds over filling the glass if you turn it off at the full glass level...The water might be black and nasty at first purge out 5 - 10 cups till the flow is smooth and clean. Then push in your reset button 5 times rapidly to reset change filter light. While your in the mood take off the lower black foot guard around the filter and clean out your Cooling lines for the chiller section below. By keeping this area clean your refrigerator will get cooler faster and save the life of the compressor and safe on your power bill also. I do not have the black cap for my filter and I always push the button in and have to tenderly take a screw driver flat head and lightly pry out the filter....
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We appreciate you sharing this helpful info, much appreciated. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
What model fridge is that? Because I have that same one and I can’t find the model number anywhere on it to request the proper filter
Thanks for watching. This is a Whirlpool. Your exact model number and serial number information can be found on the sticker located on the top inner portion of the refrigerator.
😁👍
My button doesn't pop out when I push the filter in. I push the filter in as hard as possible and it doesn't click and then bounces back out. The old filter popped out fine and the cap and filter are all facing the correct way. I have water all over my kitchen now.
I am having same problem, pushing button but the old filter won’t pop out
@@kikiantonio9904 me too
What do I do if I do not have the black cap and put it in already
What do you do if the fridge doesn’t release the filter with that eject button? I just bought a house and it has a Whirlpool fridge similar to that and pushing that button does nothing and the filter cap is non-existent
Hey Chrystal, congrats on the new house. Two thoughts.
1. It’s possible that the button needs to be pressed a little firmly.
2. The filter itself is not inserted properly and may be stuck not allowing the eject push button to work.
Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
@@DIYwithMichaelBorders yup, I tried again and jiggled a few things around and it came out! Upside is it’s the filter number I assumed it was, downside is it’s expensive to replace every 3? Months at $45/filter 😬. If you have pointers as to where to find EveryDrop Filter #3 or an equivalent for cheaper than that let me know! 🙂
@@crystalf9633
Thanks for the update & we definitely hear you. We recently installed a GE reverse osmosis system and we love it however the filter and membrane replacement each year cost $120.00.
Below is a link to our videos showing this system & install.
czcams.com/video/PLQaoM3iNq4/video.html
czcams.com/video/YJHeUBeUPF4/video.html
😎👍
Mine wont pop out, hasnt been changed in a long time...
What do you do when the red indicate light will not go away after rest?
Unfortunately the fridge in my apartment is messing the cap, is there another way I can get the filter out?
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Any update? You will need to carefully press the filter-release linkage very carefully with a tool that will not damage anything while doing it.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Hey so... can I still replace the filter if I've lost the cap?
Good morning ☕️ you can indeed.
What if the last guy that change it didn't put the top on it now its stuck how do i get it out?
Ughhh cant get the eject button to work. Guess I'm not big enough as I just keep sliding across the floor! I tried to brace myself on the cabinet but still no luck!
Thanks for watching & welcome to the DIY Raptor Club. That sounds fun...😁
Please keep us posted on your progress. Maybe put a yoga mat down on the floor.
😎👍🔧🔩
@@oldgoat50
Thanks for watching & reaching out to us. We are bummed to read your thoughts. Us fellow DIY’ers need to stick together! Is your filter still stuck?
We recommend removing lower ventilation shield. This will give you a better view on whether or not there is anything interfering with the removal of filter.
You can also remove rear panel & inspect it from inside. Please keep us posted, we are here to help.
😎👍🔧🔩
@@oldgoat50
Thanks for taking the time to share your update. Have you already received your new filters from Amazon?
This just happened to us recently. We purchased a “Where’s Waldo” book online & something completely different came in the mail...annoying but we got it all figured out.
😎👍🔧🔩
May not help now, but for others, my eject didn't work cause the filter wasn't pushed in all the way.
@@BelmondoZzz
Thanks for watching & that’s a great thing to point out. We really appreciate you sharing this. It will definitely be helpful.
😎👍🔧🔩
everything was the right number, pulled the old one, pushed in new one did not get release button to click? Could not pull filter back out....works fine, cubes and water working fine...just thought I would try again today...still release button is not clicked back and I cannot pull the filter back out...so in a few months I guess I am paying big bucks to get that filter out?
Thanks for watching & that’s odd. Two thoughts.
1. It’s possible that the button needs to be pressed a little firmly...but carefully to ensure no damage is caused.
2. The filter itself is not inserted properly and may be stuck not allowing the eject push button to work.
Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Same problem !
I replaced the filter in my Whirlpool fridge but have low flow on the water. I have taken out the filter, inspected it, put it back in but still low flow water. It sounds like the freezer is trying to make ice but after the ice drops the flush of water is very weak. How do I fix the low water flow?
Hey what’s up Tony, any update? It’s normal for water flow to be slightly slower with a new filter however not significantly slower.
What if I can't find the EXACT same filter but I found another brand that has the same numbers?
Thanks for watching & welcome to the DIY Raptor Club. The below link may help.
If interested in purchasing this filter, visit our Amazon affiliate link below.
amzn.to/3ca30F1
😎👍🔧🔩
I pushed my filter in following your video, but I can hear water releasing. When I pull out the filter, it's wet. I'm guessing that's not supposed to happen???
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community.
Thanks for sharing this, is the replacement filter the exact replacement p/n as the previous filter?
Is water leaking on floor underneath refrigerator? Do you notice any damage to the connection points on either filter or internal filter housing? Keep us posted.
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
How do you fix the metal strip if it bends?
Thanks for watching, any update? What strip are you referring to?
My cap that the water filter fits on broke. Can this be replaced?
Thanks for watching & it can indeed. If gorilla glue can’t fix it, you can purchase a brand new part online.
Hope all is well. 😎👍🔧🔩
Hi i was wondering if the refrigerator doesn’t have a filter in it is the ice maker suppose to stop working?
Thanks for watching & welcome to the DIY Raptor Club. This will depend on the exact model refrigerator.
Our refrigerator will work as designed without the water filter installed. Keep us posted on your project.
😎👍
@@DIYwithMichaelBorders Hi... Thanks for responding I'm currently looking for a filter for my whirlpool refrigerator my refrigerator model is ED5LDEXWB00
@@Rock-vd3fm
You are very welcome, below is a link we came across for that specific filter #.
www.google.com/shopping/product/1?q=ed5ldexwB00&client=safari&channel=iphone_bm&biw=375&bih=635&tbs=vw:g&prmd=mvixn&prds=num:1,of:1,eto:3285211393334724722_0,prmr:1,pid:3285211393334724722,cs:1
😎👍🔧🔩
I have this same one. BUT the black cap came off the filter. Now i can’t get the filter out. What do i do?
Thanks for watching & you should be able to install cap back onto filter.
I need help I did everything Michael did and ever since I put the filter in the water flow has been very slow and ice has been slow to I need help if I remove filter everything goes back normal
Thanks for watching and we have seen this in the past. In most cases, there is debris stuck inside the housing where the filter prongs feed into.
This can be buildup of grime or any type of sediments that have been in the water over the years passing through filter and lines.
Removing the filter and cleaning the internal housing where the filter secures into may go a long way.
My filter doesn't "click" when I push it into the housing. I push it back as far as it will go, but the button never pops out. It's newly replaced filter "housing" (I think that's what you call them) but it just doesn't work like the old one when I shove the filter into it. Any suggestions?
Thanks for watching, welcome to the DIY Raptor Club. Two thoughts.
1. Is replacement filter the exact part # as original?
2. The filter itself may not be inserted properly and may be stuck not allowing the eject push button to work.
Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
@@DIYwithMichaelBorders Thanks for answering so quickly! I had a "3-pack" of them and the guy who replaced the housing only a few months ago put in one of those before he left. It worked. So...I'm stumped. I've had this fridge for a long time so I know how easy this should be, but suddenly...I can't make it work. Maybe two of the filters were just faulty? I actually did buy the right one linked here after struggling with this one, so we'll see what happens next.
@@wisewumman
Thanks for the reply. By chance did the filters sit outside in cold weather momentarily prior to being installed.
Just like new reverse osmosis filters, cold-weather can destroy the filters and membrane which leads to them being faulty before ever been installed for the first time.
@@DIYwithMichaelBorders I got the filter last night and sure enough, the one you linked to went right in. So the off brand ones are useless. I've subscribed to get one of yours every six months, so I don't have to fuss with it anymore. Thank you for being so helpful!
@@wisewumman
You are very welcome & that’s great news. We appreciate you taking the time to share your update.
We subscribed to your channel as well.
😎👍
My original filter didn't have a cap so therefore I don't have a cap at all. Is that okay?
Thanks for watching & it should be fine. As long as the filter is fully secured into position & installed correctly.
My cap is not on the filter inside the fridge- any chance it can still get removed?
Mine too!! Help!!
Okay so I have this exact same fridge. The filter is completely stuck and the eject button doesn’t work. Like, I try to push it and it won’t even engage. I am at a complete loss here. Does anyone know what I should do???
Thanks for watching & welcome to the DIY Raptor Club. What’s your update?
😎👍🔧🔩
Ok same here! I just took off the bottom grill face and used a screwdriver to gently pry the filter out you have to jiggle it a little back and forth to get it to move then it eventually popped out. Make sure to clean all the lint off the coils to right while you are it it!! Mine was full!!
shouldn't we run about 4 gallons of water through the new filter system prior to drinking?
Thanks for watching & that’s not a bad idea. 😎👍
What happens if you don’t have the black piece? I just moved into a rental and the black cap is gone. I tried inserting the filter anyway and water started coming out?
Good morning ☕️ any update?
The cap will just cover filter and release-button mechanism. It won’t be needed for the full operation of unit however it adds the extra layer of protection to filter and button as well as a more attractive presentation.
After project, did you turn water valve back to the full open configuration?