How To Install a Clutch Cover on your Dirt Bike!
Vložit
- čas přidán 14. 03. 2021
- I did this video on my 2018 KTM SX 250, but the process is the same for any bike you may have! I will leave a link to the Boyesen website below as well as the super-cooler kit I mentioned too! Shoutout to Chris Beddiges from RRP Cycle Stuff for all the help over the past years on all my bike related questions! If you are located in the New Jersey area, give my guy Chris a visit! You wont be disappointed!
Boyesen Clutch Covers: boyesen.com/clutch-cover-offroad
Boyesen Super-Coolers: www.boyesen.com/supercooler-ki...
Chris at RRP Cycle Stuff: Instagram: @rrpcyclestuff
Ebay: www.ebay.com/str/recycledcycleftuff - Zábava
Slow and steady with easy steps, I appreciate this!
love the bike nice addition you added to it
This was a really good how-to on this install. Nice work, thanks
Best video maker on CZcams!!!
Great video, thanks for the help!
Dude, i don't even have this bike but i loved to watch the video. You make amazing videos i wish everybody did vids like you wow. Excellent video very well done ❤
thanks for the video the trick of the screws in the cardboard ,, great greetings
Great explanation! Thanks brother
No problem!
I wish you did crf125FB videos 😂 thats what i have and im not very mechanically inclined but man you make it so crystal clear!!!
Thanks! The steps should be very similar for your bike, working on bikes is easier than you think!
@@therealek47 your videos are amazing 👏 thanks again bro
Very simple job, but you did a great job on explaining how to do it and makes it super easy for beginners! 👍🔥
Do you think I should do more tutorial videos?
Would be really cool to see!
@@therealek47 yes
@@therealek47 what u think about the Supercooler kit for my 2023 KX112???
I have a KTM so I never ran one since they don't make them for my bike so I wouldn't be able to tell you how they are, sorry!
thanks for the help - perfect execution of video!
Anytime!!! Let me know about future tutorials!
@@therealek47 hit me up bro . Do I meee do other things if I install the Supercooler kit ??
I'm not entirely sure, I don't think so though, if you buy a kit it should just need to be installed and you're good
I believe the 98 cr250 are on the left side.
mint bike thanks for the tutorial you got new sub right here
Where do you buy stickers yellow dunlop on thé tires please ?
Thanks
I use a Yellow Paint Marker and use it to fill in the lines on the tires! Hope this helps
Does the bike take a little more oil now with the new cover
what kind of torque wrench do you use?
Harbor Frieght
You’re too young to be that sensible.
Just subscribed.
What type of engine oil do you use
I use motorex top speed 4T 15w50 in my bike, whenever I cant get my hands on that, I use Maxima or Mobil 1
@@therealek47 ok, thank you so much!!!
How many newton?
9.5 NM for a 2018 KTM SX 250. Please check your manual to verify!
if you take out the oil to do that
Mine is leaking 😢 says 78 in lb im already at 90 should i go tighter 😮
No! If you're at your torque spec and it's still leaking, you may have a knicked gasket or oring, or it may not be seated properly. Take is off, inspect and clean it and try again. Check the mating surfaces to make sure there's no gouges or large scratches either
@therealek47 there is no gouges no nicks all cleaned brand new gaskets and boysen cover I can push on the gasket and it moves in-between the bolts it was fine with the original cover and was fine when I put the new cover on I changed the gasket because I installed nickel hardware bolts on it my tourqe wrench is new electronic 70 dollars ebay one it's like the gasket is to thin is how I would explain it
@@rockman49er the bolt you got may be too long, I would check the measurements between the oem and aftermarket ones you bought
@therealek47 no they are the same it's almost like the new cover is warped have you ever heard of this maybe I should put it on a piece of glass and check with gage what do you think
@rockman49er that's a good idea, if it's a factory defect, they should replace it for you. Also check your case, maybe that could be warped as well. Another idea is to make sure you ordered the correct cover and if you received the correct cover. I've ordered a part that does not fit my bike even though it claims it does
Yah boyesen, we want also for ktm sx-f alternator cover 👌