Bontrager transmiter remote connection setup
Vložit
- čas přidán 28. 10. 2018
- A quick guid to setting up the Bontrager Transmitter Remote to the ION Pro 1300/ Flare RT90 Lumin lights.
Bontrager Transmitter Remote spec's:
----------------------------------
supports turn signal/ indicator ( when connected to more than one rear light)
----------------------------------
battery type: CR 2032
----------------------------------
connectivity: up to 7 lights.
----------------------------------
water Proof: IP46
---------------------------------- - Sport
Killer video, including the pairing procedure is a step above bontragers explanation. Pairing had me hung up but you really got it straightened out. Thanks!
Excellent tutorial to help me program my lights exactly as yours. Directions on the package were confusing but this helped a lot, Thanks.
Good series! Keep ‘em coming, friend :)
Excellent tutorial , Thanks.
Thanks for this. Very helpful
Good job on the review.
Hello, I know this video was made some years ago but I wanted to ask, with the remote can you change from high to low with the front light, without having to scroll through the flashing modes, is this possible?
Thanks.
Hello, just saw this.
The middle button acts as an Emergency light. So that means whatever setting you have, if you click the middle button, it will default to the brightest light for you to see and ovoid an obstacle. If you click in again it go’s back to what you had.
I’ve just check and you can ride with steady low beam, then if you click the middle button, it will activate the highest steady beam.
Unfortunately you can’t toggle through the steady/solid mode without passing the flashing ( which is illegal in some countries such as Germany 🇩🇪 to my knowledge).
So that is the only hack. Choose low beam or medium, then if you need extra light hit that middle button.
Thanks!
şefim bu on far usb den sarj olurkende yanabılıyor mu ?
I am trying to connect garmin 1030 to ION elite R, it does not seem to work. Anyone with possible solutions? I appreciate any help thanks.
have you tried the remote with non-bontrager, ANT+ enabled lights?
As of yet, No I have not :)
excelente me quedaba la duda como se enpareja o capas hacia falta una computador garmin pero veo q no
Hello, can I charge the lamp with a power bank while it is in use?
Hi, the short answer is Yes you can. Although I wouldn’t recommend it because the flap is open and you expose it to the elements dust or rain. Also I do not know the Ratio of charging to discharge while the light is ON. maybe it will prolong its deletion and maybe it will charge it to full capacity.
@@abbreviateTome Many thanks for your response. That is a big advantage over the GARMIN UT800. You cannot reload it when it is in operation. The lamp goes off. Whether the charging current is sufficient to fully charge the lamp while driving is also not the priority. The main thing is that the lighting time is extended a little!
Remote? Are these still available?
Can you connect this lights to your phone?
Unfortunately not. Only this remote or a Garmin GPS/computer device.
Will this connect via Bluetooth to my phone to check on the battery level?
No
Can the red light lamp connect to the garmin 350?
I don’t have a garmin. Only a wahoo. But I do know that some Garmin computers connect to the light. You will have to see the manual instructions that came with your Garmin or on the website.
Can you remove the remote from the mount?
Unfortunately not. Its fixed on with an allen key. The remote and mount are one pice.
It would had been good to have a quick release system, like the light, for when someone pops into a cafe for a short while.
Yes you certainly can. I removed mine off of the mount, added a bit of velcro to the bottom, and stuck it out of the way on my top tube. Keeps the bars from being cluttered.
Is the remote rechargeable?
It uses a non rechargeable battery. CR2032
Katlanır bisikletim için ışık bakarken denk geldim, sanırım Türk'sün selam olsun. 🙂 Kaliteli ışık belli,lakin buralarda varmı dır, varsa da kaçadır kimbilir.
Selam,
İzlediğiniz için teşekkürler. 4 kez Turki'ye gittim ama hiç bisiklet sürmedim. Maalesef türkçe olmadığım için google translate kullanıyorum.
This light repairable ?
Sure, you can un-save and then re-pair it in a different way. Choice is yours.
Would you happen to know how to setup the Flare RT (newer small square version) as Turn signal lights? I can't find the answer to this at all, anywhere.
Unfortunately not. Maybe through a Garmin gps unit. But I’ve got the Bontrager transmitter remote, and nothing on there states that I can set it up as Turn signals.
@@abbreviateTome I'm waiting on the reply from Trek cx support. The description of the Transmitr remote on their site, clearly states it can be used in combination with Flare RT to use as turn signals, however I think that description is meant for the discontinued Flare RT (non-square oval model). Thanks anyway!
Can you put link ..to.buy. thanks
This remote has been discontinued unfortunately. You can find it on the U.S website still in stock.
These lights are highly functional but they only last for 1 year (I have had 3 of them) before the battery and/or the switches fail, and cannot be replaced which for the price, is ridiculous.
Hello, I know this video was made some years ago but I wanted to ask, with the remote can you change from high to low with the front light, without having to scroll through the flashing modes, is this possible?
Thanks.
Hi, When you click the middle button it acts as an emergency light and switches to the highest steady beam from whichever mode you’re on.
Click it again and you’re back to your original setting.
Other than that, it needs to be toggled.