Starter Solenoid - Exploring | How it works? | HONDA INNOVA GARAGE
Vložit
- čas přidán 19. 06. 2019
- ?How Does a Starter Solenoid Work
MyINNOVA motorcycle Souvenir Shop:
teespring.com/stores/my-innov...
DONATION to production an original videos in my CZcams channel. Thank you very much!!!
www.paypal.com/cgi-bin/webscr...
WARNING
The video is for professionals only! Electrical work without proper knowledge or certification, is extremely dangerous and can lead to serious injuries, burns, blindness, and even DEATH! The use of this video is on the user's responsibility!
אזהרה!!!
הוידאו מיועד לאנשי מקצוע בלבד! עבודות אלקטרוניקה וחשמל, ללא ידע והסמכה מתאימה, הם מאוד מסוכנות, ועשויות להוביל לפציעות קשות, עיוורון, כביות, ואפילו מוות! העושה שימוש בסרטון הוידאו עושה זאת על אחריותו הבלעדית! - Auta a dopravní prostředky
Thank you for this. Having some issue with my JDM spec XR 250. Only way to get a replacement was to order internationally from Japan or so. Halfway through the work now and this helped a lot. Instead of the electrical tape, I hope to use soldering iron and with black wire ties as "weld" filler. If needed 5 min cure two part epoxy. Another alternative can be baking soda combined with super glue. That also is great to fill gaps and do it super quick as well
This could be a battery problem, and maybe a problem with the relay, sometimes a problem with the electrical wires, and sometimes with the starter motor itself. Start by test the battery.
12.7v no load
More the 10v with starter load
If you don't have enough knowledge on the subject, please go to a professional mechanic.
This here..this video right here might possibly be the exact video I needed to see regarding my 1981 Honda CB750 F ...
Thank you for making it
Thanks👍
Nice!
You are a fucking
ROCK STAR.
Beeeeeest bro
That was some fine work you did there, may I ask would you know if there's a fuse as part of the starter relay on a Honda XR650L?
You mean this part???
SWITCH ASSY., STARTER MAGNETIC
35850-MY6-671
In my opinion, yes, there is a build-in hose for the main fuse, but I did not find the catalog number for that main fuse. Does Honda sell the fuse separately? See an example in the link I attached below:
www.hondapartshouse.com/oemparts/a/hon/5fc944ac87a86613b81b5442/battery
www.rmstator-europe.com/en/xr650l-xr650r/7494-starter-solenoid-honda-xr650l-oem-35850-my6-670-35850-my6-671-35850-kcn-003-35850-kcn-000.html
So my relay just clicks and wont start also I took my starter off and tested it and it works mind you test meaning I just connected it to a battery. I tried jumping it at the starter relay with no results nothing happened, I'm really desperate for help?
Enjoyed this video. The beginning went by a little quickly for me to follow. Could you provide step by step process for testing? I’m not the sharpest mechanic and that wiukd help.
It is as shown in the video. Give the relay a voltage of 12 volts and two things need to happen: you need to hear the click of the relay, and you need to check that the contacts that are supposed to connect are really connected and conducting current.
When the relay is connected to the wires loom on the motorcycle and the starter switch is pressed:
If there is no click, or if there is a click and the starter motor does not turn, then there is reason to suspect that the problem is with the relay and then replace the relay. And maybe the problem is a weak battery???
A video cannot be a substitute for an official study of the subject through textbooks or dedicated courses for motorcycle mechanics.
If you are not in control of the subject, you should go to a qualified mechanic, this is the best and cheapest way to keep the motorcycle properly maintained.
Hello I have an crf450x an my relay doesn't work anymore, I bought another one(couldnt find the oem one but find on who looks identical but without connect the plug and just connect the 2 wires(from the battery and to the starter) the starter run, so my question its if exists starters relay normaly open and normaly closed (I mean looks identical but works different) thank you
Hello dear friend, I'm not sure I understood the question. The original component (OEM) is usually very expensive, an aftermarket part may be significantly cheaper. It is possible to wire a different connector to the replacement component. Do not make a mistakes in this matter, like wirring wires to the wrong pins. In the case of My Honda Innova the relay includes within it the main fuse. If you do not have an electrical diagram to look at, and you do not have the necessary knowledge, it is not recommended to mess with it, it can be really dangerous! Please consult a qualified car electrician.
The starter relay in Normally Open (N.O,). The N.O. & N.C. works according to the same principles. The "Normal" it is when NO current is flowing through it (when the starter button is NOT pressed)
@@MyINNOVAMotorcycling thank you so much!
And for the newbies , can I know what are you measuring at the beginning ?
I’m not too knowledgeable but I have a multimeter in my hands lol
Hi.
At
0:28
The "Bip" sound confirms that the built-in metal strip is normal and conducting electricity as it should.
I have yamaha fz25 since yesterday I'm facing problem my bike can't start this relay get some trrr trrr sound when i get start 😢
What was the issue? Did you fix itm
Can a faulty starter relay cut all power to the bike I have a 04 cbr 600rr that has a no power issue the dash doesn't even light up anymore. Im Trying to voltage test the connections
The main fuse is build-in the starter relay assembly, so maybe this fuse is blown, but maybe your battery is dead, and maybe the battery needs charging and the coils are dead? And maybe both, or something else. I think it will be easier to help you in the CBR forums (You can also try to search there for similar questions):
www.600rr.net/
www.cbr250.net/forums/
In principle this is possible, because the relay is also used to connect the main voltage line to the entire motorcycle. Check that the connector is well connected, that the contacts to this connector are good. Check that the main cable, the plus one from the battery, check that it is fastened, and check that it is fastened to the correct terminal. There are two terminals, in both there is a RED cable, The other one doesn't go to the battery, it goes to the starter, and their places must not be replaced.
@@MyINNOVAMotorcycling thanks for the input man I bought a new relay and I'm going to hope that fixes the issue I've been looking everywhere on the bike but nothing is out of place I've also voltage tested and power is definitely being sent throughout the bike. I tested my battery and it reads 12.4V and when I turn the switch into the on position on the bike it stays the same. But something happened when I was testing the relay and the wiring connection to it the bike sounded as if it was attempting to start. It spooked me honestly I wasn't expecting anything and stopped what I was doing right away. When I removed the relay I heard a rattle sound coming from it not sure if that means anything but I'm just going to try it with the new replacement coming Sunday and hope it works.
@@FrostyD3viL
12.4 volts is borderline. A normal battery should show a value close to 12.7. Switch-on mode does not create a special load. A battery that shows 12.4 volts can also be a dead battery, because the important value is its ability to provide current. That's why the important test is during startup (when cranking), that's why voltage is measured during startup (during cranking). If the voltage is below 10 volts when cranking, it means that the battery is dead (it doesn't have the power, it doesn't have enough current).
@@MyINNOVAMotorcycling that's the issue I can't even crank the bike no power to the dash no horn no headlights nothing. shouldn't I be able to get something from the dash with a battery pack connected to it at least? I will bring my battery to get tested tomorrow hopefully it is just a bad battery and a new one will fix the issue.
15 no. Fuse Jo video pe hey, Mera hero honda glamour (2012) mey 20 no. Kaa ata hey, ek bar bhi spare nahi lagwaya, 10 saal ho gaya, kabhi kabhi miss marta hey self start, soch raha hoon spare lagwa loon aur uske jagah ek extra kharid ke dalwa doon spare mey
Sorry Sir, Google didn't manage to translate what you write into English.
@@MyINNOVAMotorcycling 15 no. Kaa fuse Jo aapke video ke bike ki parts pe dikhaya gaya hey, Mera hero honda glamour (2012) mey bhi hey 20 no. Kaa, 10 saal hogaya, kabhie kabar sab kuch thik hone ke bawajood miss mar jata hey, soch raha hoon usko nikalke spare wala daalke, uski jagah ek naya daal deta hoon, 10 rupey kaa aa jata hey.
@@monjitkuch6792
Sorry Sir, Google is unable to translate the text you wrote. Maybe you try to write in English?
Great video! After reassembly did it work ?
Thank you very much. It's a component that doesn't break down easily, it's a very reliable component, and it works even after I've broken it down into parts and reassembled it. Currently I think the Chinese aftermarket part is installed, which is also very reliable.
@@MyINNOVAMotorcycling Hi and thank you for your videos! On my innova, the relay is clicking but not triggering the starter. What do you think I should do?
Thank you for your help!
@@romaingranger9232
Thank you so much for the compliment. Maybe the battery is weak, and then it moving on the relay, but not strong enough to turn on the starter motor? Maybe the relay is moving but the relay electrical connection is weak and not good? Maybe the starter is stuck? Maybe there is a disconnect in the main cable? And maybe something else?! Sorry It is almost impossible to help through the comments here on the channel. I recommend that you consult a licensed mechanic in your area.
Maybe the explanation in this video will help you:
czcams.com/video/erj0A4pQLFY/video.html
@@MyINNOVAMotorcycling Really appreciate your help and the videos. The battery shows 11,5V when I test it. I was reading about banging the starter to release it if it is stuck, how would you proceed? Thank you again for your help.
Regards,
Romain
@@romaingranger9232
Knocking on the starter it sometimes helps sometimes don't. A stuck starter needs to be replaced. From what you measure, 11.5V is not a normal value. Try electric charge (controlled charge), should be at least 12.4V. If the battery does not hold the minimum voltage of 12.3V then it needs to be replaced. Then see if the problem is resolved, or if there is another problem.
Just please. I share knowledge, I do not advise, your decisions you make are on your(sole) responsibility.
I think my starter motor not working I clean the carburetor and it work OK when I kick it over, but not with electric starting
Start from the simple things. And check the battery.
Is the battery weak? When you try to starting the lighting in the instrument panel aimed?
And of course you can measure voltage on the battery terminals with Walt Meter. Volt after charging should be 12.7V, and while starting with electric starter, the voltage should be higher than 10V.
And if you are already measured on the battery terminals, with normal charging system you should measure a voltage of about 14 volts in a idle rpm.
And at the same time you can check if the ignition click and creates an electric contact.
Please, if you do not have previous experience, or you are afraid to do damage, do not hesitate to contact a qualified mechanic.
@@MyINNOVAMotorcycling battery is ok
To rushed mate
Aah sorry but didnt like the editing it hurts head.but thank you for explaining 😆
How is that helpful at all
I'm guessing: General knowledge or Fun or Entertainment? isn'l it?