VALVE CLEARANCE & SPARK PLUG - PART 2 | HONDA INNOVA GARAGE | WAVE | 2010
Vložit
- čas přidán 20. 02. 2015
- How to: Motorcycle valve clearance adjustment.
Soundtrack: Can-Can by Offenbach
Video Part 1 includes all stages of preparation for the treatment, including a detailed list of tools and materials needed for that maintenance.
זהו החלק השני וידאו בנושא כיוון שסתומים ופלג, בחלק הראשון יש את ההכנות לטיפול עצמו שמופיעה בחלק השני.
************************************************
My full D.I.Y series Video for Motorcycle self mechanic jobs - Service guide And Repair manual:
• HONDA INNOVA GARAGE | ...
MyINNOVA motorcycle Souvenir Shop:
teespring.com/stores/my-innov...
DONATION to production an original videos in my CZcams channel. Thank you very much!!!
www.paypal.com/cgi-bin/webscr...
************************************************
This film is for professionals only הסרט הזה למקצוענים בלבד
אין לראות בחומרים הנ"ל המלצה לפעולה או תחליף לביקורת במוסך במועדים שקבע היצרן או מכל סיבה אחרת. השימוש בחומר הכתוב, המצולם ובקטעי הוידאו, הוא באחריות המשתמש בלבד. עבודה על האופנוע יכולה להיות מאוד מסוכנת ולהסתיים בפציעה קשה, תאונה אחרת, אפילו מוות.
These materials should not be considered a recommendation for action or replace the garage at the times prescribed by the manufacturer or any other reason. Use of the text, photographic and video clips, is the responsibility of the user. Work on the bike can be very dangerous and result in serious injury, other accidents, even death. - Auta a dopravní prostředky
Dude you are awesome for posting those videos. A million thanks. I was scammed by the mechanics where i lived. I payed for engine service and they never even replaced anything apart from spark plugs brakes and oil. Now i can do everthing myself.
Jim Mat Hi. Cub is a motorcycle that is very simple to maintenance. I learned that except for replacing the front brake pads, the plug can hold more than 8,000 km (but it is important to check and clean), the air filter is not replaced for over 22,000 kilometers (important to check and clean), so did the original Tires and the Rear brake pads. Even valves, after the running period, do not have to adjust every 4,000 km (but need to check). I change oil every 2000 km. So maybe your mechanic is right and your payment to the garage was mainly for the cleaning & checks. I'm not running to convince people to take care of their motorcycle. Mainly, because it may be very dangerous and end in death, and great technical knowledge is required. If you find my video useful, I'm very happy!!!. Thank you for all the nice words.
Thank you very much. With your video it´s so easy.
Bought it with 22.000km and today after 6 years i made the first valve inspection at 46.000km. No adjustment was needed :)
I love the music.
I keep looking for Bugs Bunny 😉
Seriously, excellent job.
sehr gut und professionell gemachtes Video. Zeigt wirklich alles was man braucht. Teil 1 sollte man auch sehen.
Fantastic Video. Very professionell! Thanks!
Cool :)..Thanks for your post ..more videos to view
תודה רבה!
Wonderful tutorail with realxing music!! Fantatic indeed !! Thanks very much from Provence...I gonna make my Dear Innova a happy bike ^=^ Your Fan
Hello Provence👍
Great technic for all the work. Thank you for share your knowledge. Greetings from Mexico, here the cub or nf100 are very popular!
maybe you could do carburetor tuning on your next video..just requesting..thanks
Hi, Francis and thanks for your lovely request. I photograph garage work that I do on my motorcycle, my Innova. My Innova is a fuel injection model not a carburetor model. Maybe a day will come when volunteer viewer send me a crburetor assembl as a gift for photography? Even if I will have the time for it ,I currently do not have a carburetor that I can photograph. Some subscribers have asked me before to film and edit a video about the fuel injection system, maybe that will happen someday. This year I am full of videos waiting to be edited from the bearings replacement projecte, I've already completed some of them and I place them at my MASTER's Playlist. Sorry, and thanks for understanding.
May i request for
How to tune up
Very good....but without plug compression stoke ...compression possible
Thank you. Sorry, I could not really understand your question.
Nice video, thanks for posting! Do you know what is the right torque for the spark plug? Thanks in advance.
Mike Vafiadis Hi' and thanks. Do not tighten the plug under a given torque, there is another method. Be careful not to destroy the aluminum thread at the top of the engine. If you're not a mechanic, please leave the job to a professional.
See attached link Page 77
docs.google.com/file/d/0BwmYWlzMWkPhemxqcHUtRXA4Yk0/edit?pli=1
Hello I have a question how many pounds im clamping on the cylinder head in carburetor
If the engine is an "HONDA INOVVA" engine or one of the other ANF models, then the engine is the same and the torque moment is the same torque. Note that a torque handle tool is not a guarantee of success and is not a replacement for the hand of a qualified mechanic. The reason, for exmple, wrong use of the torque handle , by adjusting the wrong torque, which can cause damage.
Hello nice video, i have a question, how much piston ring end gap clearance for this motorcycle, according to the service manual
I have the guide of Haynes, in most cases it is reliable, but it is not like the original book of Honda. I'm very pleased with Haynes manual. Maybe you purchase it?
haynes.com/en-us/
Please don't think I am trying to be a smart ass or a wisecrack, but I could not stop myself from commenting here. The crank case caps, that you ruined using a special screw driver and mentioned that an investment in tools will save unnecessary expenses @4.02:
You were probably right on the money there:
The caps were meant to be opened by suitably sized... COINs..!!
I did not find a coin in the right size, and the coins i was find were slidding and twisted under the rotation effort (the coin was benting, and destroyed the slot). These caps have a tendency to tighten tight, and are made of aluminum (soft metal). If you get along with a coin I'm happy for you. You can also take a large screwdriver(cheap) and design it to the required shape. A screwdriver slipping out of the slot would destroy it. It's easy to destroy those slots.
friend great videos i'm from asia your honda innova cub named here honda wave... pls can you show a video how to troubleshoot/repair of ignition system of the said cub and some recommendations/tips in buying genuine "OE" or just replacement parts... thank you very much. if you have blogsite link me.
+bow dayout
Thanks for your comment. Feel free to search at CZcams a video about "ignition system troubleshoot" , find it, and come back here to told us. I have a blog and is written in Hebrew .Purchase parts at the Internet is extremely common, maybe soon I will write about it in my blog.
myinnova125i.blogspot.co.il/
Very informative and detailed video of yours. May i ask, where did you learn the right torque of each nuts? Is it included in manuals?
where did you learn the right torque of each nuts? Is it included in manuals?
Yes. It has taken from HAYNES service & repair manual book No 4926
An excellent book that is recommended for any mechanic.
As far as I understand, the British take the torques from the HONDA's book.
I personally do not use a torque meter (I don't have one).
What is tha name of the tool have a yellow handle used adjusting valve clearance
I have a plan to buy but idont know the name
"Valve Adjustment Tool"
In my opinion, and in retrospect, the tool with the yellow handle is less convenient to use.
An example from e-bay
www.ebay.com/itm/Motorcycle-Engine-Valve-Screw-Adjusting-Spanner-Tool-Feeler-gauge-/283042467878
Hello! Great video, and good explanation
I have some questions:
I have a small tik noise sometimes at idle at neutral and some times at stops exhaust din’t sound correct. Is that indications for valve adjustment? If not what might cause this small amount of tik noise
How to identify the torque spec required to screw the valve lock screw?
Lastly, what is the torque spec for spark plug?
Thank you very much
It is difficult to give answers to problems through online chat. Maybe it's the timing chain, maybe the accessory that stretches the timing chain, maybe the main drive chain, and maybe something else. For an accurate diagnosis, please contact a qualified mechanic.
Since valves are part of the motorcycle maintenance routine, one should check every 4,000Km, and adjust as needed. You usually do not need to adjust them.
There is no torque to tighten the Plug , used Plug is rotated until it is arrive at the place, then add another 1/8 turn. New Plug you tighten and then loosen and retighten 1/8 turn (after it arrive to his place). Be very careful because the Plug is made of hard metal and the thread at the top of the engine is made of soft metal (aluminum). I do the tightening by what is called a mechanic feeling.
HONDA ANF 125i - OWNER'S MANUAL
docs.google.com/file/d/0BwmYWlzMWkPhemxqcHUtRXA4Yk0/edit?pli=1
Look at p.77
(p.87)
@@MyINNOVAMotorcycling Perfect! Thanks in advance!
What could be the gear of motorcycle during tune up process?
Neutral. But you can also combine into fourth gear and then rotate the crankshaft with the rear wheel.
Why you don't start up the engine? So we know if its work it or not? I just whant to know. Sorry for my english
The test is under load. The sound of the valves is typical compared to the wrong condition. It's hard to translate it into a video, you have to know the sound, and know how to separate the noise from the valves. It's not a complicated subject, but it definitely requires knowledge of mechanics.
If you take care the right process, success is certain, regardless of the test under load. Checking under load, this is for additional inspection, or for identifying a situation that requires an adjusted.
Hi Tamir! Thank you so much for your videos! they are of great help! I would have a question. My innova has a lot of backfire when the engine is cold(When Im in gear 1 or 2 going downill without any throttle) Do you know what can cause it? Can it be because of unadjusted valves? Thank you!:)
In the injected model, that may be a problem in the mixed tap which is working automatic. If it's a carburetor it may be a tuning problem. I would also checked valves clearance. The problem is common in the carburetor. In the injection has a computer that monitors the combustion conditions. In mountain passes, when the elevations diferent are greater than 500-1,000 meters, the carburetor must be adjusted. Stop safe, and tuning it with a screwdriver. I'm do not encouraged automotive mechanics, I hope you have the necessary knowledge. Without knowledge and appropriate qualification it can be dangerous and even lead to DEATH.
Try to wait another minute, let the engine warm up a bit longer, and see if that solved the problem
Thanks for your reply!
I have the injection version, and I live and drive at sea level. So it has to be a problem from the mix that the injector is making?
I mean the mixed tap is making..
In general
Maybe one of those factors? 1. Soot at the top of the engine causing the combustion chamber to reduced volume. 2. Engine too hot. 3. Early ignition . 4. Too high a rpm (in a comb). 5. Improper octane fuel. 6. The mixture is too weak.
Thank you very much!
will the valve clearance different if i use a higher cam shaft.. thanks in advance
I don't know.
I don't think so,because a higher cam love would have taken in consideration the 0.10 gap,so it could life the valve more,if you let more gap,then that defeats the purpose of a higher camshaft,but you need to be carefull with the piston anyway
love the video.
i have innova 125 but want big bore kit can you help?
I'm personally not a fan of upgrades. Increasing the volume requires adjustment in the ignition system. Higher volume (Not originaly) will increasing the load on the crank and other parts. So you might consider purchasing another motorcycle with a greater volume?
People that like upgrades certainly will know to offer you a better offers than my.
tamirkr
thanks for the reply .
i love my honda but its starting to loose some power after 87000 miles it could need a rebuild?
Try this
czcams.com/video/K6QcCGBgcEE/video.html
tamirkr
thanks man
yea i have seen that 1 hahahaha v good vid .
i must rebuild her . but 87000 miles is low for a rebuild ?
miles 87,000
[140,000Km]
is pretty nice for 125cc engine
There is no unequivocal answer that sort of thing
Only a professional who sees and hears the engine can give a precise answer
Sir what is the number of sparkllug do u use ?
czcams.com/video/eHjagRgwFKs/video.html
same us to the xrm 125 valve clearance measurement sir?
Sorry, I don't know. Try searching the web for: "Honda Xrm 125 Service Manual". I was looking for it my self and unfortunately I couldn't find one. I encourage you to ask your local Honda dealership in your area of residence.
brader same lg yan sa xrm125 natin
Sir my motorcycle is honda xrm.when i check or clean my sparkplug.i notice that there always oil on my sparkplug.but no smoke come out from exaust.what's the problem of my motor sir?
Hi. It is recommended to check the Spark-Plug every 4,000Km, and replace it every 8,000Km. If there is moisture on the plug, most likly it is an oil residues and not fuel residues. Oil (or fuel residues) should not be appear on the plug in normal condition!!! If there are an oil marks on the plug, there must be a white smoke coming out from your exhaust. Burned oil quickly closes the catalytic converter, and if the catalytic converter goes clogged it will also lower the engine power. It is very difficult to give you adviceas and help you online, I suggest you go to the local garage, who will look at the problem closely, and will give you his opinion.
@@MyINNOVAMotorcycling thank you sir.you think i need to visit honda mechanic to check my valve seal or the piston ring?
YES.And you can also look at that video too:
czcams.com/video/WzLBDsCVNSw/video.html
@@MyINNOVAMotorcycling thank you sir
this engine hole caps are cheaper than the tools...