Engine Shaking After Timing Belt Replacement? It Could Ruin Your Car or Truck! Diagnose Like a Pro!
VloĹžit
- Äas pĹidĂĄn 20. 01. 2023
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/110/2/timing-belts
Did you just replace the timing belt on your car or truck? Is the engine shaking more now? The belt alignment might be off slightly! In this video, Sue shows how a belt and gears can be off very slightly without even knowing it, because of how hard it can be to see alignment marks! She also gives you some tips to improve your view when aligning cam and crank gears!
đ§ List of tools used:
⢠Flat Blade Screwdriver 1aau.to/oa5Z/1AXAA00013
⢠Phillips Head Screwdriver 1aau.to/oa5Z/1AXAA00013
⢠Complete Metric Wrench Set 1aau.to/oMU/1AXAA00010
⢠Complete Metric Socket Set 1aau.to/o4Y/1AXAA00043
⢠Digital or Phone Camera
⢠Mirror
⢠Ratchet 1aau.to/obiP/1AXAA00016
⢠Socket Extensions 1aau.to/oa72/1AXAA00015
Subscribe: / @1aauto
Check out our playlist:
Tips & Secrets only Mechanics Know: ⢠Tips & Secrets only Me...
For More Info visit us at 1aau.to/h/ecA/
â DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravnĂ prostĹedky
â Watch the Video
â Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
â Do it Yourself
â Save Money
Glad to see 1A moving into more difficult problems, and solutions.
Very interesting and highly informative..thanks
Thanks for the video đ
You brought back the nightmare of replacing my TB on my transverse-mounted-engine Jetta. I've done a few since and the first start never gets easier.
I may have this problem, but another channel Peppermint mentioned it could be the tensioner not adjusted according to the ambient temperature when installed. But this could something I can look at too.
Nice job
Parallax Error can be compensated for with the camera as you show or with a small inspection mirror.
To use the mirror place the mirror along a straight edge of the housing where you can see the Timing Notch reflected.
Line yourself up so the Notch and the Reflected Notch are directly in line with each other. You have now cancelled the Parallax Error.
I did a timing chain on my 2003 Camry and had the vibration too. Come to find out the new crankshaft seal I put on the timing cover was 1mm off, it wasn't flush. I can see the harmonic balancer whopple slightly at idle. Took the balance r off, tapped the seal flush, and the vibration went away.
I had my 95 Civic timing belt done professionally but now at low RPM there is a winding noise. Hope you can chime in on what the cause is.
I have an 04 frontier and it was 1 tooth off but after fixing it it runs normal đ
Thank you for the good overview. Can you please clarify, how can a timing belt be off by half a tooth? If the pulleys fit into the tooth, grooves, wouldnât the pulley always be seated at a whole tooth increment?
You mentioned a noise from the engine. What iif it's a whining sound. Is it belt to tight / tensioner or off a tooth or both ?
Super merci beaucoup â¨đđź
How hard is it to purchase a oem belt. Paint mark the old belt and all gears before removing. Count the cogs between paint marks and put paint marks on new belt same amount of teeth apart as old removed belt then install new belt lining up your paint marks on belt with ones you put on the gears. Obviously doesn't work if your belt broke but then if that happened then you have bigger issues anyways.
My car definitely has interference engine and I recently got timing belt done. Even though its diesel idle was smooth as butter, I could put coffee cup on top of the engine without any spillage, now after timing belt job engine shakes almost violently. Starts, runs and accelerates normally. Any ideas?
+HolyDr1ver We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
My right door is locked from the inside and no matter what I do, it won't open. What is the solution? Thank you
Hello tanks
Some mechanic replaced my timing chain/tensioner /oil pump and after that im getting noise over 80km like motorcycles behind me kind of noise 2010 Escalade plz help!?
+@aladdincafe9699 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
1/2 TOOTH OFF....HOW IS THAT POSSIBLE.
There's no such thing as a half a tooth off.
I've done many engine swaps because of interference engines. That's why I drive older trucks. Why would you want an engine that bends valves and cracks pistons because of timing issues. They almost never trigger a check engine light, just have a timing event and end up costing thousands of dollars to fix. I've seen it happen many times under 40000 miles on various makes so it is not a high mileage thing. Just bad engine designs if you ask me.
"de-advanced" is not a word lol. Just say the timing is off if you won't say the "r" word
Prove that half a tooth would destroy an interference engine!
You do know that these engines have VARIABLE timing and that means they can advance or retard the valves a GOOD bit?
The correct statement, if you were actually an engineer would be: Half a tooth error in the timing system CAN create catastrophic results, but it depends on the design of engine and timing system!
This was just another stupid video by a company that sells cheap ass parts
The guy's from 1a auto are great!
The woman from 1a auto.......... Crickets
And the newer engines are NOT that picky that it'll crash the valves. BTW
THATS BULLCRAP! YOU WON'T GET HALF A TOOTH ADJUSTMENT JUST BY REMOVING AND REINSTALLING THE BELT AND TURNING THE CRANK!!
No such thing as 1/2 tooth,it doesn't exist!!!!!!
Thank you Jesus for the gift of life and Blessings upon me and my family. $32,000 weekly profit Our lord Jesus have lifted up my Life!!!
Crook!