Know how to change a backing plate? Wax your paint faster? Tips & Tricks on maximizing your TORQX!
Vložit
- čas přidán 19. 07. 2024
- If you're new to the world of car polishing, this guide is a great resource to help you get started. In this video, we'll take a deep dive into the TORQX machine polisher and provide step-by-step instructions on how to use it to achieve a flawless finish on your vehicle. In addition to covering the basics of using the TORQX machine polisher, this video will also provide tips on how to change the backing plate to accommodate different sizes of polishing pads, and how to properly care for your machine to ensure it operates at peak performance. Whether you're looking to remove swirls, scratches, or other imperfections from your car's paint, or simply looking to give it a high-gloss shine, the TORQX machine polisher is a great tool for achieving your goals Learning how to operate your machine properly is essential for achieving great results, and understanding how to change the backing plate and care for your machine will help you get the most out of your investment. So, whether you're a beginner or a seasoned pro, this guide will help you master the TORQX machine polisher and take your car detailing skills to the next level. So sit back, grab your TORQX machine, and let's get started on your journey to becoming a pro polisher!
- TORQX Dual Action Polisher:
bit.ly/3oPM94m
- Backing Plate:
bit.ly/3NwNtn4
- Butter Wet Wax:
bit.ly/42bycMH
0:00 TORQX Polisher Unboxing!
2:35 Where to use it!
4:00 Use It To Scrub Carpets!
5:00 How To Swap Backing Plates!
7:00 Speed Settings
8:30 Proper Pressure
10:00 Like, Comment & Subscribe!!!
-------------------------------------
● Find a Detail Garage Near You: www.chemicalguys.com/storeloc...
● Website: www.ChemicalGuys.com
● Subscribe to our channel: czcams.com/users/Chemical...
● Like Us on Facebook: / chemicalguysmfgco
● Follow us on Instagram: / chemicalguys
● Follow us on TikTok: / chemicalguys
#chemicalguys #detailing #polish #dual #TORQ - Auta a dopravní prostředky
Use the same products shown in today's video by checking out these links!
- Butter Wet Wax:
bit.ly/3NvCtGM
- Backing Plate Replacements:
bit.ly/3AIVyxn
- TORQX Polisher:
bit.ly/3NuMwvA
Thanks for the info! This is what I needed to see. I haven’t changed my backing plate yet. Now I know how to do it!
Glad you enjoyed the video!!
Excellent tutorial. Much appreciated. I bought a replacement 5 inch backing plate today because mine has been so well used and the foam deteriorated a bit in the Florida heat. Totally appreciate the tutelage here
Thanks so much for tuning in!
Just got mine! Saves lots of time!
Happy detailing!
This brand is great, I recommend it to everyone.
Glad to have you as part of the Chemical Guys family!
Got one waiting in my cart on Amazon. Working some OT and soon… it will be mine.
You're going to love it!
Hey great video Joey! It would be cool if chemical guys made a de-icer product that could be sprayed onto the vehicle and windows in winter conditions.
Great suggestion!
When do you need to change your carbon brushes?
Hi there! After many, many hours of use the carbon brushes may need to be replaced. If the machine begins to underperform it may be an indication that the brushes are wearing down.
Never heard of carbon brushes before. What is it for?
@Themachine They are the contacts for the motor. It's kind of "old school" technology but tried and true. Most newer hand tools (especially battery operated) are "brushless" design. They are usually longer lasting and slightly better performance. This of course is just a general observation as some brands and applications could give different results.
Hope that helps. Or look up "brushed vs brushless motors"
can the pads be re-used? throw them in the washer/dryer? thanks
Can you use this to apply wax or polish to a fiberglass boat?
Are the 4 inch polishing pads supposed to be for the 3 inch backing plate? I didn't see anything smaller on the website
That is correct!
Is it normal to see the pads not spinning at speed 6 when i’m going around the car but it just shakes and if I apply a little to non pressure then it spins. What am I doing wrong?
That silver “half moon” piece seems to be in the way of where the tool needs to go through on mine. How do I get that out of the way
Hi there! The "half moon" is a counterweight, by hand rotate the assembly until it is out of the way.
- CG Nick
I like the fact that you can us a small pad for a motorcycle. Like my self.
Happy detailing!
Do the flex backing plates fit on this polisher
Hi there! Yes, the backing plate can be interchanged with the Hyper Flex Backing Plates.
How do you change the brushes on these polishers?
Hey! Please contact our Customer Service team for assistance.
www.chemicalguys.com/sfcc-contact-us.html
Yo I didn't get the second backing plate when I ordered mine like month maybe to months ago
Hi Chris! Thanks so much for your message. Please contact our Customer Service team.
www.chemicalguys.com/sfcc-contact-us.html
What's the difference between the the red a d yellow backing plate
Hi Billy! The Red Backing Plate is flexible to contour to the shape of the vehicle whereas the Yellow Backing Plate is more dense for polishing flat surfaces.
What size is the small backing plate
Hey! Check out this link.
www.chemicalguys.com/molded-urethane-flexible-backing-plate-for-dual-action-polishers/urethane-flex-backing-plate.html?gtmListValue=Internal%20Search
Can you use this with 220V outlets?
Hey! Check out this link for 220v polishing.
www.chemicalguys.com/torq10fx-polisher/torq10fx-polisher.html
I bought the ultra fine finishing pad to apply the butter wax , would you suggest the black finishing pad?
Absolutely!