Shower Drain Plumbing Mistakes and How You Can AVOID Them
Vložit
- čas přidán 7. 02. 2024
- This video shares shower drain plumbing mistakes. After watching this video you'll know how to solvent weld properly, avoid water leaks, and save lots of money
#plumbing #showerremodel #homerepairtutor
Shower Drain Plumbing Mistakes
0:29 How to cut out old shower drains
0:45 How to deburr and chamfer shower pipes
1:15 Shower drain p trap
1:35 How to plumb a shower drain
4:35 How to solvent weld KERDI-DRAIN
These supplies were used in our video:
-Fein oscillating multi-tool
-BIM blade for oscillating multi-tool
-DEM4 chamfering tool
-Pica Dry Pencil with white wet jet insert
-Schluter KERDI-DRAIN
-Reed tubing cutter
Some product links may be Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project. - Jak na to + styl
So nicely detailed. Thank you very much!
Thank you 🙏🏼
Love your videos. Will remodel soon and may signed up for tutorials. Thanks
Thank you, let me know if you have any questions. It would be an honor to help you with your project
Excellent tutorial. Much appreciated.
Thank you 🙏🏼 hopefully it helps you with your questions
One weekend too late for me. But I'm glad I watched because I did not realize the P-Trap part that moved needed to be cemented. Luckily we are moving at a glacial pace and it can be addressed. I noticed I did not seem to have much time to make minor adjustments to my ABS when welding, maybe 2-3 seconds before it was stuck. I'm assuming this was because I did not put enough cement given how much I see you use. Live and learn. Thanks for you and your partner's videos.
Normally you just have a few seconds before the weld sets up. That and the fact that my eyes are bad are the reason I use the white Pica Dry insert. It really helps when the light is dim, which is common in plumbing
Your Awesome! very well done video! Thank you
🙏🏼🙏🏼
@@HomeRepairTutor I had noticed you always chamfer the pipe, best practice I’m sure but I’m well aware most plumbers skip this step.
I hadn’t chamfered ABS either and had never had issues, however I would think it might help with getting the dry fit more accurate.
I had found Often it’s difficult To get perfect measurements as the pipe will not fully “seat” itself in the fitting when dry and then when applying glue the pipe will fully seat leaving it a little short.
Do you find with the chamfer helps with easier connections during the dryfit?
sooooo I may have used a threaded ptrap in my shower install. I did leak test and it was fine. Will this fail prematurely? I can create access by cutting out dry wall from the main floor ceiling to replace it. Now that it's done should I replace now or wait for an issue?
Fantastic video. Thanks! Just one thing; I think you forgot the "gasket" under the drain when you cemented it to the riser piece. Maybe you just want to "keep us on our toes". 🤣
Thank you 🙏🏼 I used the foam spacer from the KERDI pan to get the riser pipe dimension. After I solvent welded the KERDI-DRAIN to the riser, I used ALL-SET to bond the spacer to the floor under the KERDI-DRAIN 👍🏼
Nice tips i was about to make the mistake regarding theeaded connection with no access in a couple of days... Off topic question. I dont see many videos in general about shower towers / panels (the wall mounted units). From what i can gather their warranties are not great + too many fairly new/foreign companies ... + Price... That being said to me seems like install and replacement would be easier. Even if you cant find the same company down the road, as long as you can find a simmilar one replacement is just two hose connections to the unit... Where as shower valves seems more involved especially if welded ... What are ppls thoughts, is there something else terribly wrong with these wall mounted shower towers why they are not used?
I would not buy any shower valves made by third parties and sold on Amazon. You’ll pay a cheap price but for a reason - the parts are plastic and the odds of failure increase with time. I recommend Delta or Hansgrohe valves. They have great parts, excellent warranties and the trim will last for years. Save your money and avoid any valve sold on Amazon, only buy valves from build.com or supplyhouse.com or local plumbing supply distributions
@@HomeRepairTutor makes sense, I have been using moen never heard of Hansgrohe I will check them out, but I will take your advice, thanks again.
After gluing and installing the flange. There ended up being a 1/4 gap between the foam donut and the flange.
Is that a problem?
Yes, that’s a problem because you won’t be able to properly waterproof and water will pool at the drain if it’s higher than the tray
I still need to add all set below and above the donut foam. That will not fill the 1/4 gap??
When I remove the the donut foam and use the gray foam spacers, there doesn’t look to be much of a gap. About 1/8.
@@carolline3268 you can send some pictures of the drain to me at jeff@homerepairtutor.com
Hello Jeff. I removed out tube and wanted to move and convert to PVC. However, All the old pipes and P trap a brass. Any recommendation.
?? cut it out and connect a coupler in the middle of your drain with pvc
@@evanv602 how do you do that. What type of connector do I need to connect it together.
@@georgevu2595 If you want to save money, use a fernco coupler where there is enough brass to extend pvc pipe and just copy the old brass p trap
Im not a fan of pink insulation around areas where i could have water.
Am I too paranoid? Lol
This is quite detailed, but it feels like an advertisement for several brands.
I’m not sponsored by anyone and bought all the tools. These are just the tools I use for plumbing. Also, I’m not looking for any brand deals, too busy for their BS.
@@HomeRepairTutor I have some of the tools myself what you have, and they are life saver. So much time gets saved. People usually think, how do I MAKE things, well, there also is a part when you spend as much effort in dismantling or preparing your work space and if you were to use very simple tools, yes, great to have them but sometimes takes a very long time. Unless some DIY'ers don't want to put the effort and look for ways around it. Anyway, sorry but it is a senseless criticism. I usually want to know what some tool is called that makes my life easier.
I am no professional, you should wear gloves to protect your skin
Normally I wear nitrile gloves