1968 C10 Build Episode 2 - Dismantle and Rear Suspension
Vložit
- čas přidán 11. 09. 2022
- Some carnage required! C10 chassis teardown, prep and installs
New! Tech Talk links. Hit "SHOW MORE" for links below or tap them in-video.
Before the G-Comp Rear Suspension, Ford 9" Housing for GM Trucks, C-Notch kit and Disc Brake Conversion kits can go on, the chassis needs a complete teardown and prep. After we cut all the tabs and extras off, the chassis gets a coat of primer. Then, we cut our C-notches and remove the beat up cross member. A coat of hardened urethane paint keeps the budget down before it's finally time for the big stuff. The rear suspension is reassembled, the G-Comp rear suspension goes in, then the Ford 9" rear housing, third member, rear axles and disc brakes. Finally, the G-Comp rear suspension goes in and you can start to imagine what the final product will look like.
Tech Talk videos from this episode:
G-Comp Rear Suspension • How to Install Speedwa...
Cutting 9" Axles • How to Measure and Cut...
Installing C10 C-Notch • How to Install Chevy C...
Weld-On Rear Disc Brake Kit • How to Convert Rear Dr...
Parts from this episode:
1963-72 Chevy C10/GMC C15 Pickup Truck Frame C-Notch Kit www.speedwaymotors.com/1963-7...
Bolt-In 9 Inch Ford Rear Housing for 1967-72 GM Pickup Trucks www.speedwaymotors.com/Bolt-I...
Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace www.speedwaymotors.com/Speedw...
G-Comp 1967-72 Chevy C10 Coilover Truck Arm Rear Suspension Kit www.speedwaymotors.com/G-Comp...
Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline www.speedwaymotors.com/Ford-9...
**Like and Subscribe for more!**
Follow us on social!
Instagram: / speedwaymotorsinc
Facebook: / speedwaymotors
TikTok: / speedwaymotors
Twitter: Speedway Motors (@SpeedwayMotors) / Twitter - Auta a dopravní prostředky
I LOVE SPENDING TIME WITH MY C10 FAMILY!!!! I ALWAYS LEARN SOMETHING NEW!!!
THANK YOU SO MUCH!!! A TOTALLY AWSOME BUILD!!!
I NEED TO BUY AN AIR HAMMER!!!! THAT IS A TOTALLY AWSOME AIR TOOL!!!!
GREAT VIDEO AND GREAT UPGRADES!!! SOMETHING TO CONSIDER!!! THANKS FOR SHARING!!!!
Brings back memories of rivet busting on my frame when I finally got everything off of it...the amount of work I had to do just to get it fully stripped down to the point that nothing else had to be removed & the actual building could begin was surprising...but once you get to that point, that's when the adventure & transformation starts happening...very exciting part of a build...🖖🏿😎👍🏿
I've had my 68 C10 for about 35 years. Watching you guys working I remember the time I threw A driveshaft & where it went threw hole where the old carrier bearing was the driveshaft broke in half & turned the transmission upside down braking the bell housing! Man what a bang It made. I was still able to coast down the hill turn in to my driveway.
Awesome Series ... I am building the same 68 SWB C10 and a 1938 Dodge Ratrod pickup. All parts are from Speedway!...
Great JOB, can't wait to start on my project also. great video!
Good luck with your project! We'd love to see it!
@@speedwaymotors which one of your axle kits did you use for this set up? Thanks
Love these videos. It gives me so many ideas for my C10
That's great to hear! Good luck with your build!
@@speedwaymotors Thanks. Hopefully will be making a few more orders to you guys here soon.
Boa noite congrats carros this 1963 Chevy c-10 proves Second time s a charm, this 1955 210 wagon is no exception trabalho c-10 era red kap camiseta n tamanho GG e carro Detroit pistons bom 💪🏾👍🏾😎✨🚗 amén uau sabia de tudo
Exelente trabajo
I NEED TO RENEW MY C10 BUILDER MAGAZINE, AS SOON AS TIME AND MONEY ALLOW.
Is that a Harbor Freight Quinn socket that I see at 3:58 ?
Nice job, and thanks for the tip on taking pics before stripping down the frame.
Man use that damn impact!!!
Looking good I'm digging the build !! Why do you need the pinion angle shims on diff if you have the adjustment on the trailing arms brackets ? Also where did that panhard bar attach diff or trailing bar ?
You guys were killing me when you were removing them old bolts by hand and NOT using a impact gun. I guess I'm just too old and too weak to be doing that. LOL
Love the channel but it's pretty annoying that the C10 playlist isn't in order. This would allow your followers to just click play all instead of trying to find and play the next episode to follow along.
Pretty funny watching newbies!!!!
Why didnt you all do that b4 you sand blast it
Can you just buy the two trailing arms??
Would an air impact helped? lol
I want to rebuild the rear suspension but I want to keep my stock brake drums how can I do it
Looks like grade 5 hardware? Unless im mistaken. Why not go grade 8 for the extra insurance?