1968 C10 Build Episode 3 - Install Front Suspension
Vložit
- čas přidán 9. 10. 2022
- After cleaning up our project ’68 C10’s chassis and treating it to a fresh coat of paint and trick G-Comp rear suspension, we’re ready to move on to the front. There are lots of wild suspension setups for these trucks, but we’re keeping it simple with our Complete Front Suspension Kit for 1963-70 Chevy C10. This will get the truck down in the weeds without being so aggressive that we can’t actually drive it without knocking the exhaust off at the first speed bump. This kit also gets us front disc brakes and a five-lug bolt circle to match the upgraded rear. We also splurged on some tubular upper and lower control arms.
We also chose to upgrade to our C10 Power Steering Gear Box. Be sure to grab a Power Steering Pitman Arm as well. Though they look similar, the arm is different on a manual box. While we were upgrading the steering, we also chose to install a Chevy Pickup Front End Rebuild Kit to freshen up the tie rods and idler arm.
Parts used in this episode:
Complete Front Suspension Kit, 1963-70 Chevy C10
www.speedwaymo...
1963-1970 Chevy C10 Tubular Upper and Lower A Arm Kit
www.speedwaymo...
Lares 11074 1967-74 Chevy C10/Blazer Power Steering Gear Box
www.speedwaymo...
1967-72 Chevy C10 Power Steering Pitman Arm, OE Fit, Heavy Duty
www.speedwaymo...
1967-70 Chevy Pickup Front End Rebuild Kit
www.speedwaymo...
Speedway Steel GM-Style 15 Inch Rally Truck Wheel, 5 On 5 Inch
www.speedwaymo...
GM Rally Style Wheel Highway Patrol Hubcap, Polished, 15 Inch Rim
www.speedwaymo...
BF Goodrich 579786 Silvertown Redline Radial Tire, 225/70R15
www.speedwaymo... - Auta a dopravní prostředky
CONGRATULATIONS ON YOUR COMPLETED CHASSIS!!!!! SHE CAME OUT FINE!!!! NOW I SEE WHY YOU TOOK THE TRUCK COMPLETELY APART!!!! TO RE-ASSAMBLE WITH BRAND-NEW PARTS AND PAINT THE FRAME!!!!! THAT IS THE WAY TO BUILD ANY HOT ROD PROJECT!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!!!
Those CPP Tubular Control Arms are lookin' good!
I LOVE IT!!!! ATOTALLY AWSOME TRANSFORMATION!!!!
Cool! Love the old chevy trucks.
Way cool guys!👍 looking forward to the next video!😊
Every good build needs a good base to sit on...I'm getting close to final assembly on my chassis...can't wait to see mine done & ready for everything to start getting bolted on...awesome looking roller...way different from when it got snatched out of that snowbank...
Finished my '69 about 5 yrs ago. Hurricane Ian swamped it under 5 ft of water. My wife doesn't get why that's a good thing. I get to completely rebuild it, with better fit and finish, and a wicked motor instead of the tired old small block.
Good luck and enjoy your build!
I decided to get tubular arms for my C10 after having the same thing. It took a torch and air hammer to take apart one control arm over 4 hours and we said nah. Ordered the tubular arms and had the truck back on the road the next weekend no regrets, other than maybe doing a coilover conversion form the get go.
Ready to boogie buddy? Rubber baby buggy bumpers... nodding off... hurting so dog gone much!
👍🏻👏😀
Did you guys use a certain hardware kit when you refreshed all the bolts? If so do you thank you can let me know or share a link where I can buy the hardware kit?
Beautiful job so far but I've got a question. Why upgrade to coilovers in the back and not the front? Is there a reason for that decision?
I just bought a 1968 c20. Can I add the aftermarket a arms ect to this c20?
Will this
Work
On my 68 c20 ?