VZ Commodore with a misfire issue. Fault code P0205

VZ Commodore with a misfire issue. Fault code P0205.
Don’t automatically assume this is an injector fault issue.
TaT members can read a related repair solution at www.tat.net.au/tatsafact/498
To join TaT and get instant access to our Repair solution database visit www.tat.net.au/social.html

[@MrConspark]

Thanks again

[@paulhenry5497]

Hi got a vz sv6 2006, thanks mate, got any other vz clips

[@mrbissi9377]

Hi Im having some issues with injector 6 circuit malfunction. After investigating and replacing spark plugs, coils. It still happens intermittently. A bit more investigating i have found when i lightly move the the bottom harnes on ECUi can replicate the injector 6 malfunction error.
I have had a p0443 evaporative emission malfunction for about 2 years or so but still drivable and didnt have any issues.
At present the car is still drivable and only notice is car rough idle for less than a minute and goes away. This only happens intermittently sometime doesn't happen for 300k.
The car has 435000km
These are the errors i have cleared in the past. The last 3 errors are more regular
P0443-00 - Evaporative Emission Controll System Purge Solenoid Circuit Malfunction
18 - (Current) ECC Fault Logged
18 - (Current) Auxiliary Serial Data Bus Fault
U2100-00 - CAN-Bus Circuit Malfunction
19 - (History) EEPROM Error
U2108 (histroy) Can-bus No Communication with ABS/TC/ESP
U2106 - CAN-Bus No Comunication with TCM (Transmission Control Module)
P1632-48 Immobiliser Fuel Disable Signal Received
p2500-00 - Alternator L terminal Low voltage
p0206-00 - Injector 6 circuit malfunction
p1668-00 - Alternator L Terminal circuit malfunction
Has anyone had similar and was it a ecu.
Should I go for 2nd hand or new?
Thanks for your help

[@BobbyFincher-us3dr]

Hey mate, I'm currently stuck with u2108 could you please tell me how you fixed it. Its a hard code and doesn't go with a wipe.