Video není dostupné.
Omlouváme se.
Whirlpool Dryer not heating or drying clothes- Most common causes!
Komentáře • 120
Další v pořadí
Automatické přehrávání
Whirlpool Duet Gas Dryer Not Heating | Thermal Fuse ReplacementMatt's Garage & Misc. DIY
zhlédnutí 83K
Dryer Troubleshooting - Not Drying or Taking a Long Time to DryBill Newberry
zhlédnutí 2,5M
Dryer Not Drying Clothes - The Cause and The SolutionWord of Advice TV
zhlédnutí 183K
Hojení bodné rány nožem při carnivor stravě | Očima vojáka speciálních sil | #mscrewpodcast #podcastMichal Šopor
zhlédnutí 169K
The Joker saves Harley Quinn from drowning!#joker #shortsUntitled Joker
zhlédnutí 60M
NIKDY JSEM - NEJZVRHLEJŠÍ PŘIZNÁNÍ 🥶⛔ @Lisak37 & JENYSVladaVideos
zhlédnutí 287K
11 year TRICKS Magnus Carlsen? 😱 #magnuscarlsen #chessChessBase India
zhlédnutí 13M
Dryer Won't Heat Up Or Dry Clothes - DIY How To Fix Heater In 2024jeffostroff
zhlédnutí 1,4M
How To Fix a Dryer Not Heating (Quick & Easy)Appliance Factory & Mattress Kingdom
zhlédnutí 304K
Dryer not Heating? EASIEST way to troubleshoot and replace Whirlpool Duet Heating ElementDad Does it All
zhlédnutí 3,9K
Dryer Not Heating - How to Diagnose & Repair - Complete InstructionsHelping U online
zhlédnutí 260K
How to Fix a Gas Dryer That Won't HeatSears PartsDirect
zhlédnutí 1M
Dryer Troubleshooting: How to Disassemble a Whirlpool Front-Load Dryer | PartSelect.comPartSelect
zhlédnutí 184K
Whirlpool Dryer Repair - How to fix "No Heat" From your dryerBrownCoatDad
zhlédnutí 197K
Whirlpool Dryer Not Heating - Diagnosing Common IssuesByrd Appliance Specialists
zhlédnutí 2,8M
Whirlpool Gas Dryer Not Getting Hot - Check The gas valvetheapplianceman
zhlédnutí 185K
WHO CAN RUN FASTER?Zhong
zhlédnutí 41M
Který kostým je váš nejoblíbenější? 😭Natyla
zhlédnutí 130K
Co na to ŘÍKÁTE?🔥 JIŽ online na HEROHERO🔥TĚLO na TĚLO - podcast
zhlédnutí 61K
Koupím Barče Cokoliv Co Trefí Šipkou!DodoCZ
zhlédnutí 160K
Insane Coffee trick EXPOSED 😱☕️ #shortsWian
zhlédnutí 7M
Gyms in 2024☠️Noel Deyzel
zhlédnutí 19M
Replacing a valve on a full water tank! 🫣💦 - 🎥 the_ladyplumberUNILAD
zhlédnutí 143M
Vybíráme outfit na koncert😅 Berete 💛 nebo 🩷? #justforfunLollipopz
zhlédnutí 143K
Check out our DIY Raptor Club store
teespring.com/stores/diy-raptor-club
Great video! Tip, if you are checking for continuity, check ALL possible related parts to this problem. I started with the thermal fuse and it was blown. I decided to keep checking and found that I was not having continuity in the heating element either. I took it out to inspect and found one of the rods had split (cut) which shorted it out. If I had not continued checking, I would have wasted more time and possible additional shipping cost if I had just ordered the thermal fuse only. Bottom line, since you're there, check everything! Good Luck!
@@joeram92
Thanks for watching and sharing this helpful info, much appreciated, and always welcome here on our DIY channel. 😁👍🧰
Thermofuse was the issue in my Whirlpool Duet gas dryer. Great video. Saved hundreds of dollars. Great job sharing with us Michael!
👏🏻👏🏻👏🏻
Awesome, thanks for sharing this. Saving hundreds of dollars is a great thing.
Thanks for watching. 😎👍
This video was so good I never fix appliances but every step including showing the multimeter helped me fix my washer with one trip to ace hardware. Thank you!!!!!!!!
You are very welcome, we are honored to read this. You are now officially a DIYer, how cool is that.
You have earned this wonderful rewarding feeling by making it a DIY project, and you saved some cash in the process! That’s a win-win and definitely paves the way for a good weekend!
😁👍🧰
Wonderful information. You gave me the knowledge to discover and fix my issue. Had house painted and the exhaust shutters were sealed by the paint. A simple fix without a repair bill. WONDERFUL! Thank you!
You are welcome, and thank YOU!!!
That’s our goal, to get you the info you need without wasting your valuable time.
😁👍
I put in new coils, new thermal fuse and no change. Finally cleaned the heat sensor strips with some scotchbritepad. Even though they appeared quite clean and shiny, they must have been glazed over with something. After scrubbing them the clothes now come out dry. I say try the sensors first because its easy and cheap. Perhaps second if airflow out the duct is suspect.
Thank you for sharing this Thomas, awesome job pinpointing the cause.
Like you said, even being glazed over a bit can cause havoc. Hopefully many stress free days ahead for you.
Where’s the heat sensor strips?
@@monicakay3084
Thanks for watching, what are you experiencing? This is a gas fed dryer system with coils and thermostat cutoff sensors/switches.
Thermostat is mounted on lint draw ductwork underneath unit.
Where are the heat sensor strips? I'm having a similar issue and can't figure out what is going on.
The strips are the problem 95% of the time.
Excellent video, you are great at explaining steps so clearly!
Thank you David, good morning. Just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
This was so helpful!! Thank you so much. Turns out my dryer was fine but the thermostat was covered in lint.
Hey Andy, that’s great news! Awesome job making it a DIY project. You saved yourself a good chunk of cash by locating Thermostat and cleaning lint off of it to get it back up and communicating properly to control board.
Let us know if you have any questions and hey check out our newly launched DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Worked exactly as explained thanks! Saved me an expensive trip from the repairman!
Great to hear & you are very welcome. Thanks for watching. Saving money is always a good feeling. Hope all is well.
😎👍🔧🔩
Thanks for the tips, helped revive my dryer for a couple more years!
Thanks for watching & welcome to the DIY Raptor Club. That’s great to hear & a couple more years sounds awesome.
Enjoy your night. 😎👍🔧🔩
Very thorough and clear video.
Thank you for watching. 😎👍
great video. Luv how you managed to get deep in to the machine to show the actual part. Thank you.
Thanks for watching & you are very welcome. Happy it helped. Let us know if you have any questions.
😎👍🔧🔩
@@DIYwithMichaelBorders mbv ññkñ
@@brandonmartin3100
😎👍🔧🔩
Excellent.thank you. God bless for sharing this information with us
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Thank you for that, God bless you! Our goal continues to be getting you the info you need without wasting your valuable time.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
my dryer stop working, so i went and bought a used one, but i kept the old one, and watching a bunch of videos like this one, i fixed the dryer, in one month later, the used dryer that i bought, stop working, so i installed the one i fixed, it was so interesting, my wife will never be without a dryer again... first dryer was the thermofuse, and the second was the motor belt, order the part, and in half an hour i was done
Thanks for watching & sharing this, thats awesome that you took the time & turned your old dryer into a DIY project and fixed it.
Awesome job, we love reading comments like this that share DIY experiences. Hopefully many stress free days ahead for you.
😎👍
a thin magnet that extends is handy for dropped screws
Thanks for watching & sharing. Any & all helpful info is greatly appreciated!
😎👍
Great help! Thanks!! 😊
Good morning, thanks for watching. Hope all is well.
@ 10:37 Isn't that the thermal fuse? All other videos I have seen show that shaped component as a fuse. The component to the right of it was likely the thermostat?
Thank you for your good show.
Thanks for watching LeRoy, we are happy to help. Thank YOU!!!!
We are drinking our morning coffee answering any and all questions for the DIY community.
Let us know if you have any questions and hey if you’re into crypto trading, be an early participant in our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time! 🧰
Bro youre a champion
We appreciate that, thank you. 😎👍
This video convinced me that I can’t do this myself. Need a repairman.
Thanks for watching & welcome to the DIY Raptor Club. If you change your mind and pursue this as a DIY project, we are here to help before, during, and after your project.
Us DIY’ers need to stick together!
Thanks Dude! That was super helpful.
Great to hear & thanks for sharing this. Hope all is well.
😎👍
Hi there! So first and foremost I have to tell you that yours is the best of MANY videos I've watched regarding my dryer. You're awesome! Now... my frustration (and forgive me because I'm about to be "that" girl) is that I can't get my back panel off! I've unscrewed everything you can and it comes loose on the top just fine, it's just stuck at the bottom. I think it's being impeded by a little black brackety thing down by the vent hose? Cannot, for the life of me, figure out how to get it to let go. HELP?!?!
Thanks for watching, we appreciate you sharing this. These panels can be stubborn at times.
Some units will have miscellaneous aluminum plates that are secured on by screws. Behind these plates are additional screws that will need to be removed.
Can you easily remove black bracket? This may also free up panel to be removed. Please keep us posted.
Great job. Thanks
We appreciate that & hope all is well. Enjoy your day Steven.
😎👍🔧🔩
Thanks
You are very welcome Roberto. Us fellow DIY’ers need to stick together!
Hope all is well. 😎👍🔧🔩
best fuckin tutorial I have ever used!!!!!
@@tommymcredbeard
Thank you, we are honored you found our video helpful. 😁👍🧰
Excellent👍👍👍
Do NOT get those cheap screw in brush cleaning kits! Unless you actually want it to unscrew and be left inside your dryer duct hose. If so, go ahead. Get the push lock kit from Menards or Lowes.
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community.
We appreciate you sharing your thoughts and advice, always welcome here at our channel.
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Great video
Thank you, & thanks for watching. Hope all is well.
😎👍🔧🔩
My heating igniter won't even glow. Doesn't that preclude gas coils as being the issue?
Good morning ☕️ thank you for reaching out to us. You’re definitely on the right track, replacing coils should fix issue.
Many more helpful videos to come. 👍🧰
Question. I am going to try to fix this myself. I think I can only do it to the coil part. My question is, what is the name of the screwdriver for the hexi size screws and what size. Thank you in advance
Thanks for watching, we don’t remember the exact size…🤔
Please let us know if you have any questions.
I cleaned my dryer vent and back of the dryer and my heat came back on but 24 hours later the heat went off again. Any idea what this could mean?
Thanks for watching…that’s odd. Did you notice any electrical wiring that may have been moved while you were cleaning your dryer vent?
It’s possible that you have a loose electrical connection and while you were cleaning vent, it may have moved ever-so-slightly and created electrical current…leading to parts that create heat working again.
My harbor freight meter starts at 1. When I test the thermostat (what you did at the end of the video) it jumps for a second and goes down to 001. Does that still mean it needs to be replaced? Thanks for your help!
Mi se adora es eléctrica y parpadea el control panel;me podría ayudar a saber qué pasa!?
Thanks for watching.
Can you tell me the part number of the thermostat you replaced? Great job on the video, it was very informative!
the part number will depend on your model number. there are three different one search it with your dryer model number.
How do you know which problem it is?
Thanks for watching, what’s your update?
THIS DOESN'T APPLY TO ME I DON'T HAVE A GAS DRYER.
Thanks for watching & welcome to the DIY Raptor Club. You may have a faulty heating element or thermistor.
Keep us posted on your project.
😎👍🔧🔩
@@DIYwithMichaelBorders , I checked all three: the heating element, the thermostat and sensor or cut out switch they are all good. Still doesn't heat up.
@@auletjohnast03638
Thanks for the update. Have you ensured that your dryer hose & vent are clean & clear...not allowing any back flow of exhaust...which trips the system & shuts off heat?
😎👍🔧🔩
Is there a fuse as well?
Thanks for watching & depending on your make & model machine, you may have a relay or cutoff switch.
What symptoms are you experiencing?
You had to take apart the whole thing to replace the most common failure point. Was this designed in germany?
Thanks for watching & welcome to the DIY Raptor Club. Overall, a friendly DIY project.
😎👍
Very intelligent
Thanks for watching & welcome to the DIY Raptor Club. We appreciate that!
Enjoy your night! 😎👍🔧🔩
Does replacing the coils allow the gas to turn on or just light the wick cus doesnt seem like gas is passing thru ???
Thanks for watching & the coils play a huge role in the lighting process. Replacing coils will get you back up & running.
If that doesn’t do it, you will need to replace the thermostat. Believe it or not though, most people replace the thermostat along with the coils because you already have the system apart and the thermostat is a very friendly priced part.
Great video. I replaced the thermistor and new circuit board and still get a pf code after trying to start then turns off on a whirlpool duet dryer. Door switch and motor continuity checks out good. Any ideas where to check next. Thanks.
Thanks for watching & welcome to the DIY Raptor Club. You may need to manually reset & clear error code.
Press (Pause/Cancel button) twice & (Power button) once.
If that doesn’t work, unplug machine & leave unplugged for a minimum of 5 minutes. After 5 minutes, plug machine back in and see if this reset procedure clears code.
😎👍🔧🔩
@@DIYwithMichaelBorders thanks for sharing......I got it working... some show it was some how hung up in the pf mode.
@@JP-pf1nj
Awesome Awesome, thanks for the reply. Hopefully many stress free days ahead for you!
😎👍🔧🔩
Does Lowe’s sale the thermostat or do you have to order it?
Thanks for watching, unfortunately LOWES doesn’t sell parts. You will need to visit a local appliance repair store or order it online.
😎👍🔧🔩
I have that exact model and have been struggling to dry loads sometimes, when it isnt drying I hear a rattling noise that's going on and off, any idea what the issue might be?
Thanks for watching, any update? That could be many things however we can narrow it down to the likely parts that may be causing your issues.
1. Coils
2. Igniter
3. Burner
4. Thermostat
Please keep us posted. 👍
I have the same problem with hearing a rattling noise. Did you find out what it was?
Something odd about my two coils. You show your 3 wire connector on the front and the two wire connector on the back rod. On mine, it's reversed. My 3 wire is on the back rod and the two wire coil on the front. Never been opened up before. Wonder if it makes any difference? My 2 wire coil is bad. No continuity on that one. The other is fine.
On a side note, I guess I should have watched the video first. I pulled the dryer away from the wall and started trying to take the back of it off :-[
Thanks for watching & if the original placement of of your wiring was as you mentioned, it’s important to keep it to the original configuration.
😎👍🔧🔩
is there a heating element to troubleshoot ?
Thanks for watching & welcome to the DIY Raptor Club. There sure is. Below is a link to our video showing replacement of Heating Element in an LG machine. Although it will be slightly different than yours, the video will hopefully give you a better understanding of what to look for.
czcams.com/video/0cCKDDlokH8/video.html
😎👍
I have a Whirlpool compact front load dryer model WED7500VW that I need to change the start capacitor and do not know how to get to it. Front panel screws are too
close to the drum to unscrew and back panel supports the drum. Any ideas?
Thanks for watching & welcome to the DIY Raptor Club. We are unfamiliar with this specific model. We recommend visiting:
RepairClinic.com
Once at this website, enter in your model number in the search window and all replacement parts should be available. When you click on parts, you will notice video showing you how to work on your exact machine. Keep us posted!
Enjoy your night! 😎👍🔧🔩
Just use a socket wrench with an extender. Worked for me.
@@ameeecker7976
😎👍🔧🔩
Use a cordlesss drill.
Thanks for watching & that may help. We appreciate you reaching out to us, enjoy your day.
😎👍🔧🔩
My dryer just stays on sensing any ideas
Thanks for watching, any updates? You may need to perform a system reset. Below are two links to helpful videos.
czcams.com/video/5PINGwykgkk/video.html
czcams.com/video/CZpuoZYwpow/video.html
😎👍🔧🔩
What’s this model number
Thanks for watching & welcome to the DIY Raptor Club. Unfortunately we don’t have the model # handy. We hope the video helped.
😎👍🔧🔩
so my dryer it's marking on the screen wet, how can I fix? help me please
Thanks for watching. What exactly are you experiencing? Keep us posted on your project. Welcome to the DIY Raptor Club.
😎👍🔧🔩
He said its showing a wet setting on the dryer and how can he get it off...
Hey where is that hotty...
KangoKid Kidd
Thanks for watching, she is out cruising around on her Gravely.
😎👍🔧🔩
@@DIYwithMichaelBorders LOL call me STUPID but what is a gravely...you mean she passed away...gosh I hope NOT...
KangoKid Kidd
Her new toy. A zero turn lawn mower.
😎👍🔧🔩
@@DIYwithMichaelBorders cool and good job on that dryer
KangoKid Kidd
We appreciate it.
😎👍🔧🔩
My heating igniter won't even glow. Doesn't that preclude gas coils as being the issue?
Good morning ☕️ thank you for reaching out to us. You’re definitely on the right track, replacing coils should fix issue.
Many more helpful videos to come. 👍🧰
点火器死掉了是什么原因,哥哥😅