Video není dostupné.
Omlouváme se.
Dryer Not Heating - How to Diagnose & Repair - Complete Instructions
Vložit
- čas přidán 10. 10. 2022
- How to Fix a Dryer That Has No Heat. Complete Instructions on how to find and fix no heat problems in a dryer. This is a common problem and a pretty simple and straight forward diagnosis and repair to make on a standard Whirlpool-style dryers, that cause it not to heat and dry your clothes. There are not many parts in dryers and the repair should be straight forward.
If you're getting heat but things are still damp, you may have air flow issues in the dryer or in the venting and I will show you how to do that in this video.
You will also learn ways to make your dryer more efficient and how to properly attach and place the vent hose for the dryer's best performance.
#noheatdryer #dryernotheating #dryerrepair
*If this video was a help to you give it a "thumbs up". If you have not already done so, please consider subscribing to this channel.
Disclaimer:
Although I have been following these procedures for many years; I assume no liability for any damage that may occur to any person or property as a result of the information provided in this video. I take necessary precautions (that I am aware of) when working on these projects but that in no way implies or creates any expressed or implied warranty or guarantee of any kind of particular result. Any injury, damage or loss of any kind to anyone or their property or anything related to information in this video is the sole responsibility of the user and not Helping U Online (this video).
61 year old Grandma here! This is by far the best repair video I have seen! My Daddy, (miss him so much,) taught me to do many things and I had a general idea of how to replace a dryer element, but wanted to see details and to make sure I do it safely. Thank you for this wonderful, simple explanation!
Wow, thanks!… and keep up the good work.
Hey girl. How you doin? ;)
well said! best repair video...
Thank you for doing this video! I'm kinda looking forward to seeing if I can repair it myself! UPDATE: I dismantled, diagnosed, and replaced the heating element by myself thanks to your instructions!! Thank you!!!
Glad it helped!
Thanks, brother. My upper, high-heat, thermo tested bad. I would have just changed the high heater thermo. I have to say that your reminder to change the upper and lower has saved me aggravation. Rock on!
Glad it helped
Thanks man, you taught this “common laboring rube” not only how to fix his dryer, but also how to do a continuity test.
Adding this even tho it's been posted 200 times. Best explanation and presentation of any dryer testing video I've seen.
Glad to hear that. Thanks
Thank you so much, we are pensioners. I wanted to buy a new dryer but my husband said look on CZcams. This has given us the confidence to test which part it is.
Glad it was helpful!
I’ve replaced a thermal fuse a few times. My dryer just stopped heating. Checked the fuse and the fuse was good. The heating element had a broke. Coil. I had never fixed this before and wouldn’t have known how to diagnose this without your video. I was surprised how easy it was to fix. The appliance store I went to had the exact part as it’s a pretty common part for a lot of models. Thank you so much for this video.
Thanks for sharing
I know alot of people have told you the same thing over and over but seriously thank you ❤ I’m a single mom I can’t afford to buy a new dryer I just ordered everything I need off of Amazon for 70 dollars that’s tools included this is so nice of you, you really are helping a lot of people your channel deserves more credit
wishing you the best and God's blessing....
This is an excellent video, so detailed with great shots and so much knowledge. I hope you continue to make how to videos.
Thanks, will do!
A simple step by step instruction to troubleshoot a Kenmore dryer. And most of the parts are available on Amazon fairly cheap. Thank you so much for this video.😊
Thanks for sharing
by far the best video on internet today, you saved my day and make me look like a hero. thanks bro
Way to go and glad it helped
Thanks for the in-depth video. I followed your instructions and am now a dryer repairman. Another "tool" for the "toolbox."
Excellent!
Just coming back to say thanks for the help 👍. Mine was the timer. I followed your instructions now my dryer is back in working order, and saved a bunch of money! Thanks 😊
Great to hear!
Another "Thank you" comment to say you just saved me a bunch of money and hassle!
Good to hear!
Best video I've seen on CZcams for diagnosing dryer issues. Mine was a broken heating element. Thanks a lot for the simple explanations
You're welcome!
I agree you kept it simple the best repair video I've ever seen
Listen, I don't know if this will work yet as I watched the entire video before I tried the repair on my dryer, but you explained this process flawlessly. I feel very confident now attempting this diagnosis/repair. I'll report back on if I was successful, but please make more videos in the mean time. Thanks!
God bless you with wisdom, ability and favor…
Wow, the most helpful dryer troubleshooting video I’ve seen as a novice homeowner I feel like I can replicate. Thanks!
Glad it was helpful!...and you can do it!
I agree with Grandma - You really need to teach professionally! Thank you for your excellent video!
You are so welcome!…And thank grandma for me
I am excited. With 5 men in my home and no one has fixed the dryer in months, I will make an attempt. :) I am so excited actually :D
Thank you for your guidance! Worked like a charm.. back up and running in one day!
Glad it helped!
awesome video. I don't even have this type of dryer but watched it anyway because it was so well done.
Thanks
I’ve watched this half a dozen times. ❤
Incredible video for so many reasons, excellent job
This was AWESOME! I had already fixed the tumbler (wasn't moving- it was a belt issue). When I opened up the back to do a diagnosis found that it was filled with lint! Turns out I just needed to vacuum it and clean off the terminals. Luckily my house didn't catch on fire! LOL. But this is GREAT because now I know how to diagnose issues in the future, and will do better maintenance on the dryer from here on out.
Absolutely fantastic video!
Thanks
Getting ready to tackle mine. Thanks for the upload!
You can do it
this helped me fix my dryer, thank you!
Great to hear!
Awesome video! CZcams at its best.
Thanks
Very clear video. It is helpful!
Glad to hear that!
This was an excellent video. So well done. My 24 year old dryer isn't heating but will run. Will do all the tests just like you showed. Thanks for taking the time to film this and showing exactly what to do.
Glad it helped and wishing you success on your repair
Thanks for the excellent tutorial. I have the exact same model. I had already taken the back off yesterday and found the thermostat that you replaced was bad. When you went through how to test all the other possible causes for no heat after locating the faulty element, I realized that I hadn't checked the high heat thermostat at top of the duct. I will test that to make sure. Thanks again.
You're welcome!
Thank you for making this. Very clear and easy to follow.
Glad it was helpful!
So straight to the point fixed it literally as I followed along same exact meter same problem even same failed part lol
Thanks so much for being so thorough. I had issues with our old dryer. Checked for any lint clogs & cleared out vent hose. Nothing really filled in there. Then, checked thermal fuse. Good. Checked Door switch = super loose & not connecting, so got new door switch. Fixed the problem of dryer not turning back on.
Then, the dryer isn't drying the clothes. It does heat up, but doesn't completely dry the clothes. Going to check the heating elements you so kindly explained here & will try to fix the issue. Thanks so much!
Simple fixes, but without a professional giving tips & tricks, pretty lost, lol. And, hard to find anyone local that does this sort of work. Glad to pay someone else, but can't get ahold of anyone. Good learning experience myself.
Thank you Sir! Your video is straight and to the point. My dryer is now fixed.
Congratulations and glad I could help
This is great! I have a question - why do you sometimes take one of the leads off but then for others you leave them both on? Thank you!
Thanks for the info…💪🏾
Best video yet,of all repair videos!
Thanks 👍
@@helpinguonline I'm going to troubleshoot it tomorrow as soon as they are done using it!!
Best video I've seen on fixing my Dryer Thank you very much for taking the time to make this video! Thank You!!
Glad it helped!
i will tackle this tomorrow...very helpful explanation!
Glad it was helpful!…Wishing you the best
Hey, just checking back in to see how it went
Great presentation 👏 🙂
Thank you 🙂
Excellent video
Glad you liked it
Very detailed.
Great job man!
Thanks!
God bless you brother whoever you are. I love the way you show the help many DYS people look for help. The simple way, is the best way.
I appreciate that… God bless you too!
This video is exactly what I needed. Thank you
Very Clear Explanation. Thanks a Lot.😊
Thanks for this video. Was able to replace the heating element and save money
Glad it helped
Perfect video. I have the same dryer and exactly the same broken heating element. Thanks!
Wow, thank you, fast and to the point. Great video!!!
You're welcome!
Good video .. thank you
You did an amazing job of making that simple and easy to understand, Thank you!
Glad it was helpful!
Very helpful, I have the same model dryer.
Great 👍
By far the best video
Thank you blessings
Thanks and God Bless you!
Thank you!
Thx so much. Your video is so informative & easy to follow. I thought I was going to have to buy a new dryer 'til I found your video. Thx.
Glad I could help!
Glad I could help!
Clear, excellent video.
Many thanks!
wow, fantastic video, this one was very detailed, and you use Resistance (Ohm), whilst most are using the continuity function with the beep noise, so will try your way. Thanks for giving the list of all things to check.
Hope it helps you get yours fixed
Your video helped so much I'm not much for doing repairs like this but it was easy for me after watching your video....
Thnx so much
Glad to hear that
Awesome sir
Thanks buddy, now my wife can stop yelling at me !
Glad to help
Thank you for your help. Found my problem.
Great! Way to go
Very helpful and easy to follow, thank you.
You're very welcome!
Great explanation. Thank you!
Glad it was helpful!
Thanks you best video ever you save make my day and today I make my wife happier then ever lol😂
Glad I could help
Best Repair video Thanks
You're welcome! Glad it helped
Very helpful! Thanks for sharing.
Glad it was helpful!
Thank you sir, this fixed my problem. Much appreciated
Glad I could help
Great video sir should have a million 👍 up!
I appreciate that!
Thank you very much for your help!
You're welcome!
Nice video man. Great analysis. You couldn't have done any better. Thank you so much
Much appreciated!
@@helpinguonline My heating element went out the day before yesterday. I fixed it yesterday. Your video was very helpful. Thank you so much!
Thank you Sir. nice work just what I needed
Glad it helped
Thank you- I did as instructed and my heat element is broken (like the one in your video). I appreciate you!!!
I've run across a few pretty darn good videos about diagnosing and such, but yours really is top of the list. Bravo.... Just curious why you wouldn't check the thermal fuse first though, as I thought they would generally be the most potential problem.
Great Video
You help me a lot I fixed my machine thank you
Way to go
DUDE MOST HELPFUL VIDEO EVER WELL EXPLAINED .. THANK YOU 😊
Glad it helped
Excellent video! Maybe consider teaching!
Great video !! Mine starting smoking and now won’t heat. Getting someone out
Thank you, great video.
You are welcome. Thanks for sharing that
GOOD JOB
Thank you, it helped me out....
Glad it helped
Thanks well informative video !!!!!
Glad it was helpful!
Just picked up a multimeter. Gonna diagnose my Estate dryer by Maytag. Looks almost identical to yours. Wish me luck!
You can do it
It really is the best video, but every single test for me checks out and still no heat?
Thank you!! 😊
You’re welcome 😊
Thank You For Your Video, Sir. It Really Came In Handy. My High Heat Thermostat Was The Issue. I Replaced It With A New One And It Heats Better Than Before. Should I Still Change Out The Bottom Thermostat Even Though That One Wasn't The Issue? I'm Asking Because You Mentioned It In Your Video. The Bottom Thermostat Read "0.00" On The Multimeter While The High Heat Thermostat Didn't Even Give A Response. Also, The Thermostat Just Under The Fuse Read At "7.07" And The Fuse And Heating Element Both Read "0.00."
If it’s working I would leave it alone for now
Your awesome
Thanks
You are welcome
Hello, the heating eliminate went out so we bought a kit, but once we put everything back together it gets hot enough it blows the thermal fuse, I changed out all the Thermal Cutout Fuse, High Limit thermostat, and the Cycling thermostat. the vents are clear out side and inside the dryer vent is too, I never used the L250-80F fuse not sure if it suppose to go on top where the Thermal Cutout fuse goes are what. I have the 309F Thermal Fuse Cutout Up top on the heating
eliminate. I have the High Limit going to the Heating Elements Terminals. and i have the L155-25f fuse going to the Cycling Thermostat.
Can you save the old heating element and use any of those heating element springs to repair your new one if one was to break down the road ?
I appreciate you my man…..thank you
Glad to help
Your the man👍
AWESOME!
Great video sir thank You
So nice of you
Thank you!!!!
You're welcome!
Thank you very much!👍
You are welcome!
You’re a life saver. TYVM!
Glad I could help
Do you check while it’s plugged in?
*_No._*
Thanks 👍🏻👍🏻👍🏻
nice job!
Thanks!