Samsung Clothes Dryer Heating Element DIY Repair - No Heat & Noise Fix
Vložit
- čas přidán 11. 01. 2019
- I take apart a Samsung Model #DV42H5200 Dryer which is not heating at all, do the replacement of the heating element and put it all back together. While I have it torn apart I also fix a vibration which is creating a noise while cycling.
DC47-00019A is the replacement part number of the heating coil and sensors which I got from Amazon.
More Samsung Washer / Dryer Help
• Samsung Front Loading ...
My dryer stopped working about a month ago and of course I googled why my dryer wasn’t heating anymore and came across this video and I was like 🤔 let me try it. I am a 29 year old, single mother of 3 and buying a whole new dryer would put me in a tight budget for the next couple of months so buying one was definitely not the route I wanted to go. Ordered the part on Amazon, 4 hours later (I struggled a bit cause I don’t got tools but a screw driver 😅) my dryer works again!!! So proud of myself!!! 😅 thank you so much for the video!!! ❤
You go girl good for you !!!!
If you can raise three kids on your own you can repair your dryer - congratulations !
Good girl!!! ❤🎉❤
Still single 🤓
My dryer shit the bed again and my wife left me. After watching this video a second time and repairing my dryer I ended up hooking up with her sister and my life is better! Thank you so much man
Thank you Macho Man!
*** ATTENTION EVERYONE *** THIS IS THE VIDEO TO WATCH!
THANKS FOR THE DETAILED VIDEO! In my case, the Heating Coil did not show obvious break. Replaced Heating Coil... No Heat. Disassembled again, replaced 2 Sensors on the side of the Heating Coil. COINCIDENCE OR NOT.... Right before putting front panel (door), I NOTICED MY BLUE WIRE TO THE HEATING COIL WAS NOT CONNECTED. Reconnected, reassembled dryer... Plugged in, Flipped breaker back on, TESTED DRYER... YAY HALLELUJAH I HAVE HEAT!!!!
I watched many other videos... YOURS IS THE BEST!
Thank you for those kind words sir! God Bless Texas!
Just today I followed your instructions to the T and replaced the heating element. It works!!!, saved hundreds of dollars and my husband thinks I'm totally rad finger cuts and all. Thank you!
I swear this video is predestination of everything to come.
My dryer (exact same model) stopped heating. Followed your instructions and everything was the same… coil broken in the exact same spot and I cut my finger exactly the same too.
Great job.
Watched this video to replace the element in my dryer as well. Saved me a boot load of money doing it as well! I think most everyone cut their finger in the exact same spot: I did! It was still worth it! Thank you for the help!!!
))))
Thanks for the insight, I used kevlar gloves to do the job.
Same here minor cut nothing that a bandit can’t fixed!!
Yep, I can't sell my dryer now for fear of my dna being used against me in a future crime I had nothing to do with.
@@avi8r66 lmao
This video legit helped my husband replace our heating element! Saved us $700+ , only spent $30 on amazon! 👏🏼 applause to you great video! Thanks for posting
Next time you do it. Be independent.
@@hamzabouteraa2027what? What a weird thing to say
Thank you so much for this video, you saved me a lot of money.
For other folks, my issue was that the dryer was over heating and would not stop running. It would get to the cooling cycle and keep running with one minute left until it overheated and I got the hE error. So the heating element was still getting hot, but wouldn’t shut off. This exact video was the solution for my problem. If you are having my issue, suggest you follow these steps to check out and replace the heating element and or components.
Took me longer than I thought, but it worked! Thanks so much for your in depth video...there’s no way I could’ve figured it out myself.
2024 here & this video is still very helpful. It got me to checking why my dryer wasn't working took it apart & sure thing same issue. Thanks for the video & the step by step, it saved my family $$$.
Got it back together back up and running & is getting hot ready to dry. Thanks again for the very helpful video.
@mmartinez3578 Love it!
I really couldn't believe i could fix my dryer's non-heating problem but your video just made it as simple as ABC. I did it in good time and it now works perfect. Thank you so much, you just gain a fan.
Thank you for this video!! I have a similar Samsung dryer that stopped heating. I was expecting a rather large repair bill by calling someone since I never worked on a dryer before...
Sure enough the heating element wire was broken so that's why there was no heat. This is an excellent video and broke down everything that needed to be done in order to get to the heating element. I TOO cut my hand! Lots of freaking sharp edges once you open the dryer up!
I ended up replacing the entire heating element assembly only because it was $20 more than just the bare wire heating element and I figured at 10+ years old, might as well get new everything which includes the thermal switch and thermostat that are built into the heating assembly housing unit. (Unbolt the entire assembly and bolt new one in, connect everything- done)
Videos like this make CZcams great! I'm actually surprised at how easy this job was!
I was already going to get a new dryer until I found this video, like all the others you saved me literally hundreds of dollars! Thank you!
This video was very helpful! I replaced my heating element with no problems after watching this video like 10 times, lol. AND I didn't cut myself! Thank you.
It's always nice when you don't bleed working on a DIY project.
I definitely want to thank you for the diy video. Like you, I purchased the element from Amazon, roughly 36 bucks and followed along step by step and now my dryer works and I'm not out of $200 - $300! Thanks 👍🏾
oh it's more than that, I was quoted $475 + Taxes.
Labor is not cheap.
This video was a great help. Thank you very much for posting it. Much like others have said, the two screws at the back of the lower bracket were a huge pain and very frustrating to deal with. Everything else was quite smooth. I have a very similar model dryer (DV42H5000EW/AC) and I only needed to remove 6 out of 8 screws to take the front door and panel off. For example, at the very front when I opened the door, I only had to remove 2 out of the 4 screws while I noticed that you removed all 4. I also opted to replace the entire heating assembly with an OEM Samsung one. Yes, it was much more expensive than just the coil but I got scared reading some of the amazon reviews where people were commenting that the coils didn't last very long. I didn't want to have to do this job again anytime soon, particularly since it's a stackable dryer and hard to reach the back of it. I've run it once and seems to work fine. One problem that I was having is that it was getting stuck on one minute (i.e. kept running).
I had the same exact problem. The heating coils could have been designed to be more durable. Great video. Wow, those rear screws were a pain, but doable. Also, thanks for explaining the rattling sound!
Sir thank you for this video. I just bought replacement parts for $20. Better than a repair man charging $100 just to show! Thanks again!!
Thank you so much for letting me know I could get a repair kit from Amazon. Had no clue something like this was there.
This video was super helpful! Took us a little longer than 18 minutes, but now my dryer works again!
Glad it helped!
If you ever come to KY, I’m buying you a beer! Thanks so much! I fixed my dryer in less than 24 hours. Perfect link to the part, and it was delivered quickly.
Cool! Road trip from Minnesota to Kentucky! Glad it helped!
After we replaced the heating element, we ran into an issue where the breaker was tripping whenever we started the drier. It turned out the coils were making contact with another price of metal and causing the breaker to trip! Once we fixed that issue, it started working perfectly. It’s even hotter than it was before!
Thank you for the video!
Great instructional video. I completed the replacement of the heating element on my Samsung dryer.
Thanks, brother! You've saved us time and money!
Had the exact same problem with my slightly different Samsung model, but the insides were identical. Bought the part off Amazon for about $26 and now the dryer works perfectly. No cut fingers! Do be careful as there are a lot of unseen sharp edges.
Awesome!
Can you send me link from Amazon its hard to find the right product.thank you
Followed this step by step and fixed my dryer. Probably saved me hundreds. Thank you man!
Glad it worked out!
I have never even seen the inside of a dryer but was able to do this by following your video. Thank you so much!
Thank you! Was “relieved” to find that my coil spring was also broke, so like you I replaced that only and not the other OEM parts.
Back right-side U bracket screw was a pain, but my biggest issue was stripping out one of the front side door screws 😱
Fortunately had a Dremel cut-off wheel that I was able to put a small “slice” into the head of the screw and then crack it loose with a flathead screwdriver. Still took some muscle because it was cranked down AND had red loctite! Thought I’d mention my solution in case anyone has the same problem on this or another project.
Now just hoping the $26 part from Amazon lasts so I don’t have to do this again. Some reviews have me a bit worried. Thanks again for a great vid and for letting me know to wear gloves. The only cut was to that stupid door screw!
This is the best tutorial I’ve found online by far! Thank you for taking the time to explain in detail
Thank you so much for taking the time to make this video. I followed every step and replaced the same part without any issues. Very grateful!
This was a great video! I didn’t have to remove the drum! Yay 😀! I had limited space but I did fine. Dryer is working like clockwork! The hardest part was the stand the element was sitting on.. I had to bend it a bit,so it was a terror to put back on..but I managed. My steam w&d are about 11 years old and still work fine. Thanx for your help. Greatly appreciated..money saved!
THANK YOU THANK YOU! I did it. I would’ve never tried this probably without your video. It took me several hours, but I ended up bringing my shop vac in. The dryer was full of lint and I did a complete cleaning. I put on leather gloves after slicing up my hands pretty good. Thanks again
Very helpful. I lost a leg on my incoming power, ended up being a fuse out on the street. 1/2 of my house worked, 1/2 didn’t and my dryer sounded like a 1950’s car trying to start and made all the remaining lights that were still working do a flicker. My dryer had problems right after they fixed the power. Turns out my element melted. Being a single mom of 2 middle schoolers is hard to just buy a new dryer and cloths line drying is hard in an apartment. Thank you for posting this video, it saved me more than you will ever know
Glad it worked out for you!
Great video. Fixed my dryer really quickly with this. Couldn’t opt for the Amazon part (going on a trip tomorrow, need to use washer today). Appliance parts store only had the entire element assembly ($70, but made the repair even quicker). Thanks!
Great when things work out!
Thank you for your video!!!, mine went out again after having it repaired few years back. Thanks again for the great indepth video. Warranty expired... $35 part on Amazon. Saves me over$350 repair. Thank again.
Thank you! You made this daunting task easy for me and saved me a couple hundred bucks.
Excellent video!
Almost bought a new dryer but after watching your video I thought I would gamble on a $35 kit and see if I could fix mine. Worst case I buy a new dryer but your detailed steps made it easy.
Thanks so much!
Awesome outcome!
I fixed my Samsung dryer with the help of your video. It had exactly the same issue, broken heating coil. Thank you so much. You saved me a couple of hundred dollars.
Yes!
Thank you so much for your video .I just fixed my dryer, all by myself, with your instructions of course. It's amazing. I can dry my clothes again, yay! God bless you!
Glad to help!!
Sir, you are a God send. This video deserves 1 million views!! Here I am, a mom of 2, hubby is at work and I decided to take this upon myself. Thank you!!
Hopefully I make it to a million with people like you supporting me! Thank you for the kind words.
@@MelvinZoopers meant it 100%. one quick question, how would I check if the sensors are bad?
@@MelvinZoopers mine broke exactly at the same spot as yours
@@cindygallo1954 I'm not exactly sure on that one.
I have the same dryer so I clicked on you. Good video. I ended up just bending that bracket temporarily that holds the element housing in place while I pulled it out. Then I bent it back into shape on the re-assemble. I cut my finger in the EXACT same place you did. Thanks for the help!
You're the freakin' man!!! I was able to fix my dryer thanks to you! I really appreciate your help and just can't believe I was able to get it done! God bless you!
Hey just wanted to say Ty I fixed my dryer today all because of your video it was a breeze minus those 2 screws behind the support bracket lol they kicked my butt but I got them out then it was smooth sailing I couldn’t believe how easy it all went back together and it works great I couldn’t be more pleased Ty again you probably saved me hundreds from calling a repair man Happy New Year and God bless
Amazing! I also have this model of Samsung dryer. Just followed the step by step instructions and viola! It drys again. I purchased the part as suggested via Amazon 2 days ago for approximately $34.00.
I also had a break in my coil.
Love it!
Your video was exactly what I needed. Saved a ton of money and even got the same cut. Thank you so much!
I love a plan when it comes together!
This video saved our family from having to fork out a ton of money. Thank you! And I only have 3 cuts on my hands from replacing the heating element
Thank You!!!. This Video saved me hundreds of dollars. I would of never tried this repair without this video. You made it workable.
Thank you for this video. I was able to watch this and fix my dryer. My heating element went bad as well. I spent 24 dollars and about 45 minutes to get my dryer up and running. My wife is happy so I am as well!!!!
Fabulous video. Following it and was able to understand and install the new heating element, which I purchased from Amazon ($30) versus another site that listed the element for $119. One think I don't recall you mentioned is how SHARP the metal is - both inside the dryer and the edges of the container holding the element. Thank you. I saved the cost of the service call and what they would have charged for an element.
You're welcome! Remember I cut my finger on the metal? It is very sharp!
For everyone here before y’all judge ik it’s confusing but on the bottom of the channel it says fix ur drier or something like that that’s the link to the video I tried it on my and it worked great.
I know why y’all think he didn’t help but trust me he did and there’s is a full video give a try
Thank you so much for this video my husband and I change ours👏👏👏 saves a lot they wanted $175with parts and labor.
Great!!
Thank you so much. It simple but when you don’t know what you are doing it can be very complicated, I watched the video several times and then acción... thanks.
Just want to say thank you!! I watch this video and I did it order the part from Amazon for 30 dollars with the sensors and replace everything the actual element part wasn’t cut or any damage just dark because of the heat the usual after 12 years of use but I just changed everything sensors and is working like new I replace my drain pump from the washer years ago same watching videos here and is still working.. thanks for your help!
Your video is just si great!!! 🤩 56 years old mom just changed my element with your help!!! 💪 Followed each step carefully, the only thing I just let it rolled for 15 seconds, it is heating, but there is a little smell of burnt 😱 is it cause it's a new element....tks in advance for your help!!! 🤗
Yes, it will burn that off quickly! Glad you were able to get it done! 🤘
@@MelvinZoopers Thank you sooo much!!! 🤩🤩🤩
Awesome quick fix. Thanks for the video! Made quick work of the dryer without having to take the whole thing apart!
Excessive lint burnt up another coil today. Here just refreshing my memory. Found that the exhaust duct under the drum was loose. Just wrapped some insulation tape around the seam and replaced the element. Thanks again!
Best Tutorial on this Samsung on CZcams...Great Job....Hope Your finger is better after 2 years!!! THANK YOU!!!
Healing up nicely, thank you!
Thank you ! I just replaced my daughter's element. Your video made it all go very quickly. Hardest part was getting those 2 screws out on the back side of the U bracket !
Without a doubt the hardest part.
I believe I have a newer model. The same bracket just slides into a clip with no screws. I was very happy to find that out. Thanks for the video though. Because of it, I bought a used set on the marketplace for next to nothing because the dryer wasn’t getting hot. Now I have a good set for cheap.
@@xdarkmercx i purchased my dryer last summer for 125 so i think i got a lot for a little.
This video is amazing. Exactly what i needed for my dryer. I'd recommend samsung parts, they are way more expensive but these dam amazon parts crap out every 6 months or so its annoying.
Great video! Replaced a $6 part and perfecto!!!!! Thank you for posting this!
Thank you so much for taking the time to record and post this for us all!
Thanks for the video, I just changed my heating element and it was super easy and went really fast thanks to this video!
Awesome!
Thank you. Your video is the only one I watched, and I got it done in about an hour.
Just fixed my dryer using this video, God bless you sir!
This video was fantastic, you just saved me a lot of time and aggravation. Thank you for the help.
Thank you. Took me a couple of hours. Part costed $27. You’re greatly appreciated 👊🏼✝️☝🏼
Great news!
Took me an hour and just follow this video to fix my dryer! Thank you!!
Thank you, just used this video to replace my heating element! Works like a charm again.
Yes!
Melvin Zoopers but damn, reaching the screws of the riser for the heating element was a pain.....
Just paid to have this done. Expensive. The tech pulled the drum out the front. Said it was easier to get to the rear for a few things.
This worked PERFECTLY!! Only took me about an hour and voila!!!!
An hour? Wow, nice job!
Your video is amazing.... to the point and fast forward on the more tedious bits. Great job!
Great content! That’s what’s up! My dryer has been drying quite well! This man truly changed my life!
Thank you so much, I just got done replacing mine. Thanks to you I saved a lot of money.
Awesome!
Thanks. Got my dryer fixed after watching your video.
Thank you for this video i was going to get a replacement for it and my wife told me to check on CZcams how to fix it, and Thanks to you buddy i don't have to buy a new one. I fix it my self.. thank you so much for this learning video.. muchas gracias! God bless! 🙏
Great video!! Thank you for the video!! You’ve just saved me $900 from a new dryer!
Cool video Thank you for taking the time out of your life to help us. I paid $250 first time for a tech come out.It went bad again so i decided this was my best route. The coil was visibly broken so i replace the coil. I did not change the sensors per your advise. everythings working Thanks again
Glad to hear it! To tell you the truth, I replaced mine again since making this video.😠
Big thanks!!! Took me about 45 minutes saved me hundreds.
Glad it worked out!
thank you for this video! I fixed my dryer today and it is now drying again.
I’ve used this video to help me replace our heating coil twice. Thanks very much!
Yeah...they don't seem to last very long. Thanks!
Thanks so much for doing this. Saved me a ton of time!
Thanks for the video. I just followed your instructions, ordered a new heating element through Amazon and the dryer is working again, although I ended up with 3 extras screws 😂. We have the same model #, however, mine has a couple of clamps in the control panel, it was a little tricky to get it loose. Other than that, all went smoothly, Thanks again. 👍
Just finished fixing my dryer following this video! Thank you!
Good news!
Thanks for video. You did an awesome job explaining and showing step by step process. You saved me hundreds of dollars. Thanks for the awesome video.
Thanks so much for the detailed instructions! It helped me find the broken coil. Thanks again
You bet!!
Thank you man! Exactly same repair here.
Thanks so much for this video! Tested with ohmmeter and I surprisingly didn't have my heating element go out but another component did. She's heating again!
Thanks man! Got my grooming salon dryer back up and running on my own 😁
Your video helped me a lot because my dryer went out and the same thing happened with the heating element
Dude. Thanks for the video. Crushed it. Element is replaced.
Glad it helped!
Thank You... This video helped my take the dryer a part to replace the heating element.
Great Video! Saved a major service call after ordering the assembly replacement. Looks like they reduced the number of screws on the U shaped bracket to facilitate the removal.
Thanks for the update!
Thank you! I was following another tutorial that had me removing the drum and I thought there had to be a way to get the element out without taking the whole thing apart. You showed me how!
Love to hear it!
Thank you so much you just saved me $600 bucks. You are the real MVP. You also did a great job of explaining and showing good footage. #IloveDIY
Thank you for sharing, saved my a$$ lol
Thanks man saved me 300 bucks by doing it myself
Thanks for putting this up! Made for an easy repair. Got the part from Amazon and fixed in about an hour.
Thank you! You saved me lots of headache on this repair!
Thanks Melvin. My dryer is working perfectly again.
Mission accomplished!!
Greaattt video helped fix my dryer,I to had a break in my coil
I had the same exact issue on the same or similar model, thanks for the video!
Thanks very much. Followed step by step and got mine down perfectly. Highly appreciated 🙏.
This was a great video thanks bro. So I couldn’t wait a couple of days for the new element to come in so just for everybody out there you can get a butt connector and kind of crimp it onto the wires that have broke and the heating element will come back on. I haven’t figured out how long that will last as of yet, but it works.
Nice job!
Thank you so much! I was able to fix my dryer, it's not easy for sure, specially the two screws that was behind the bracket under the coil. Appreciate!