Video není dostupné.
Omlouváme se.
Samsung Electric Dryer Disassembly - Dryer Repair Help
Vložit
- čas přidán 18. 08. 2024
- Repairing a Samsung electric dryer? This video demonstrates the proper and safe way to disassemble a dryer and how to access parts that may need to be tested and/or replaced.
Here is a list of the most common dryer problems:
Dryer won't start
Dryer stops turning during cycle
Dryer won't turn at all
Dryer takes too long
Dryer is too hot
Dryer won't stop
Dryer doesn't heat
Dryer trips breaker
Dryer makes noise
Click here to purchase replacement dryer parts:
www.repairclini...
Additional dryer repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
Dryers aren't nearly as scary as they look. Took mine apart, found the problem, ordered the part, put it together. All thanks to you.
Couldn't get a repairman for a week and you just let us fix it in an hour. Thank you, thank you!
After my Samsung Dryer fell apart and Samsung refused to even acknowledge their product was defective, I decided to tackle it myself. I went to the repair clinics site, found my dryer drum under my model number and ordered it. It arrived in great condition quickly and folowing this repair clinic video, I removed the old drum and installed the new one in less than 2 hours. I am now a fan of Repair Clinic. I highly recommend their business and their installation videos.
Thank you. Our model is years newer, but this video was still spot on. The only difference was that the control panel was a lot harder to pull off due to extra plastic clips in difficult-to-reach spots.
For reference, our issue was a shattered idler pulley wheel.
I'm having the same issue getting the control panel off. What ended up working for you?
@@throwintre No trick I'm afraid, we just kept at it. One of the clips broke during the removal but it ended up not mattering once we put it all back together.
Thank you so much for publishing this. One of the most helpful how-to videos posted on CZcams. It was clear, accurate, and high quality. Thanks for making my repair so much easier.
7 year old dryer stopped drying clothes. I'm marginally handy around the house. I viewed a few videos and figured out how to check the heating element with a meter and confirmed it was bad. With this video, and another by repairclinic.com I completely took apart my dryer at 9pm on a sunday. RepairClinic.com videos were super helpful. I decided to purchase the heating element from RepairClinic. It should arrive in 2 days and hopefully I'll be able to put everything back together. I took pictures so should be ok. Thanks so much. I feel very accomplished. Sure beats paying $300+ for a tech to come out and do it or, worse, paying $1000 for a new dryer.
Thank you! I just replaced my broken heating element using your video. Sooooo helpful!
My Samsung has stopped heating. All dusts are cleared and all else works. Is the heating element most likely the part I need? Thx.
@@lj4501 did you fix your problem because mine smells like burnt so ima take it apart ?
@@kevinherrera2403 Heating element was broken. Once replaced all works well. It did not smell. It just stopped working
This is the most straightforward, well shot, well lit and professionally produced repair video that I have seen. Tremendous job! I followed your technician nearly all the way through the disassembly process, was able to fix the problem, and then followed him through reassembly. You saved me a couple of hundred dollars!
65
Fantastic tutorial. Seriously. Extra points for specifically showing screws on the way out and when replacing them. This is a HUGE thing since many tutorials of all kinds just say something like, “and then put everything back the way you found it” without showing it.
I’d like to add one detail that I found out the hard way. After setting the drum in, when installing the belt, your arm presses right against the wires that go to the heating element. Mine pulled off and I didn’t notice, so I had to take it back apart just to plug the wires back on to the heating element. Thank you for the great video!
even a 2019 samsung dryer hasn't changed much which makes this video incredibly useful today. Had a samsung gas dryer, just need to remember unplug outlet and close gas line. thank you for saving me money and time.
Best video I have ever used. The step by step info was right on. Saved me a ton of money on repairmen. Thank you SO much
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thanks for the highly detailed and visualized installation instructions. I was finally able to repair the belt and pulley on my dryer because of your video. Your dryer was exactly like mine,except for the light connection. Reconnecting the belt took a while because it needed stretching a bit, but your video was on point. Excellent job! 👍👍
Brilliant tutorial video. It is well paced, correctly sequenced (complete disassembly followed by re-assembly), and camera angles and lighting is perfect. I have a different model Samsung dryer, but the steps and dryer construction are essentially the same. A pen dropped from the lint trap opening into the blower assembly. After removing the front panel, removing the blower cover revealed the plastic blower fan blades. The pen was underneath the blades, but simply rotating the drum popped the pen up into the blades allowing me to pull it out. Thanks for producing this. It made what have could have been an expensive service call into a simple 30 minute job.
Joey Lee Awesome! Congrats on the successful repair. It's always amazing what can make its way into a lint filter.
Thank you for this video! It really helped me a lot! I have a slightly older model of this machine and for the most part everything was the same. My dryer stopped spinning over a week ago and noticed the drum was easy to spin so I had an idea that the belt snapped. Since I was going to be taking apart the machine to replace the belt anyway, I decided to also replace the pulley and the 4 wheels too. It wasn't that hard but it did take some time but I'm glad I also replaced the mentioned parts since the pulley and wheels and the rods the wheels where in were worn out . But in the end the dryer is working like new again.
Great job! We are happy to hear that you have fixed your dryer.
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
This video has helped me twice so far. Once to replace the motor, and then to replace the heating element. Thank you so much!
I normally don't like and comment Videos but this one was an outstanding help while fixing my dryer! Thank you so much for the great work, I appreciate it a lot!!
Thank you very much. You saved my home from being burned down. I smelled a burning smell from the dryer and only pulled off the exhast tube and cleaned that only because i didnt know how to open up the dryer. Your video got my able to completely open my dryer to find that lint was burning ontop of the heating element and gas line!!!it was pitch black! thanks a ton!
Wow, nice work!
Mine smells like that 😊
This is exactly what I needed- thanks for the video. Saved me a service call
Same here.
Outstanding video. Simple, sequential, really excellent teaching design. Helped me immensely and want to thank you for posting.
Your instructions are perfect. Couldn't have repaired my Samsung dryer without it.
I just fixed my dryer using this video. Thank you very much for this guide!
No problem!
Phenomenal videos... Informed me what to test for and where. Allowing me to seamlessly repair my Samsung dryer!!!!!THANK YOU!!!!!!
I never ever comment but this saved me so much money and time. THANK YOU!!!!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Excellent audio levels!
Thank you, I used this in part to fix my grandmothers 11 year old dryer. Her heating element went bad. It would have cost us twice the cost of the part just to have the repair man drive to our house, instead it only cost the price of the part.
Hello I have a problem with mine it starts to smell like burnt was that your problem ?
@@kevinherrera2403 My issue was that the machine was not heating up properly.
If your machine is smelling burnt it may be that lent or debris has built up somewhere inside the machine a failing motor heating element or strap. I would Google burning smell while running dryer to get ideas on how to troubleshoot.
If you decide to open the machine you may be able to find one of these issues in your machine.
Half a million views. Thank you for posting this. We want to fix our stuff.
Thanks! this video saved me at least $1200. i appreciate you posting it. i was already pricing a new set but then i saw this video.
Excellent video. Easy to follow directions. Can't ask for anything more.
My son watch the video and fix my dryer he is only 15 year old really good video it’s help. Thanks
Super helpful and identical to my dryer. It made my idle roller replacement straightforward!
Cool thanks!
Yeah forsure!!! I got the exact same one! This vid.....total score.
Thank you! Used this to take our 13-yo dryer apart to change the belt and idler pulley.
mine was filled with lint too. I am so glad I came upon you video. It was so easy to understand and straight to the point. Lint cleaned out all put back together and working fine. Thanks again.
+Carrie Siesser Thank you.
RepairClinic.com im trying to see if lint build up around drive motor is reason why it doesn't heat. do i have to completely disassemble as the video show to get to drive motor and clean it?
Thank you so much! Couldn’t have done it without this.
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
Awesome video. Helped me fix my dryer when I was flat broke!
Thank you for posting these videos. This is the second time you have saved me a service call.
Momus0776 Glad to help.
thanks for the video, look simples but one thing i would have to know is maintenance and lubricating and parts. I will see your other video thks
Thank you so much! You made it look so easy with clear, concise instructions!
Thanks for the video, taking my Samsung front load was a snap. Just vacuumed the lint out. It's been running for one cycle and then won't turn back on for about an 45 mins to an hour and then if you start it again, it only runs for a few mins. I have to let it sit for a few hours to run another "full dryer cycle." If cleaning the lint out, doesn't fix it, I'll order some parts from you, just because the videos you provided were so helpful! Thanks!
LongRX7 We're glad the video was helpful to you!
Straight down and to the point, thank you
Nice video. Mainly I learned that I can access everything basically without pulling the dryer out. Except for those 2 top screws. I can get to the wheels, belt, and idler bracket then. Ordering parts now.
Great guide. It was all I needed to decide to get a pro to do it.
Excellent job 😊
Super helpful video!!!!! Thanks!
Thank you! You've saved me at least a couple hundred dollars.
Excellent diy video thank you
A huge thank you! You literally saved us $400.00
Thank you the video. Saved me a bunch of money and no, i didnt switch to geico. I was able to replace the belt using this video.
You help me thank you thank you!!!!
Was exact what needed to watch to pop out dent on left panel on dryer where it had been dropped and rubbing against drum. Got a brand new $1000 samsung dryer for $200 subtract my own labor to pop out the tent and learn some dryer mechanics. Think Im ahead by learn something on top of it all. Thanks.
I just fixed my dryer using this video! Went to Sears to get a better quality replacement belt. Works!
That's great! For future reference we sell the parts on our website: www.RepairClinic.com?TLSID=1773 - we have a 365 day return policy, so if the part breaks or you end up not needing it you can return it for a full refund within a year!
Very helpful, thanks! I was able to take the dryer apart and found the heating coil to be the problem. Saved lots of $$$
this is exactly what I was looking for. thank you
Thanks for making this tutorial. Made me feel like a pro, and I was able to stop that horrible squeaky noise.
Nate: how did you stop the noise? I also have a squeaky noise.
I approve of the use of Klein Multipurpose screwdrivers :)
Thank you soooooo much... I fixed it myself and saved time and money 🤑
Excellent video. A great help for DIY people. Thanks
Appreciate it Stan!
Thank you
If you wanna test your thermal fuse or heating element there a access panel on back that the lint tube comes out , take that off and you can reach in and test your thermal fuse,
Perfect instructions. Thank you!
Great video! Thank you so much. Just what I needed.
Excellent guide!!!!!
Thanks!
Great, this video solve my a problem in 45 minute.. thk
thank you
This is what entertainment is for an Engineering student like me 😂
Thanks! This was exactly the video I needed to do the work myself.
Awesome fixed it. Thanks
Awesome video. Was very helpful when tearing down a similar Samsung Dryer. Many thanks and keep up the great work. :)
Thanks for this, the dryer lint trap was clogged and had a tooth brush stuck in it, i have 5 kids. Anyway i was racking my brain around how to fix it, your video helped out tons!
Good video. It helped me a lot! Thanks you!
Thank you for another thing I learned today.
A friend of mine has one of these and we're curious if the water line is actually needed hooked up
Very informative. thx
Really helped thank you
awesomeness yall.
Muchas gracias!!!!!
I think it’s easier to attach the belt to the motor pulleys from the back of the dryer instead of the front
Great video!
thanks so much for the post of this video helped us fix our dryer
That's great!
Thanks for this. There was a grinding screeching noise. The underwire from a bra made its way down to the blower.I didn't need any parts. The video couldn't be more clear. ...need to see if I can get the belt put back. georgeP
+George Pringle Thank you for sharing.
Do you have to take the vent hose off also?
Very instructional
oliver915 Thank you.
Thanks a lot!
I have tested the relay switch, the high temp., the thermostat, and the heater, all are working. the dryer will not heat up anything I am missing. The repair clinic
There are a few other possible causes. Enter your dryer's model number in our website's repair help section: www.repairclinic.com/repairhelp?TLSID=1773.
Is this Samsung unit disassembly similar to the Kenmore Elite Series? They look very alike. I need to access my neighbors dryer because there is a lot of lint in their lint trap
I know this is 9 months later and probably too late, but for anyone else coming late - yes, the Kenmore Elite I have, which I purchased in Canada, model # 592-893040 - was built by Samsung and is almost identical to the dryer in this video.
Excellent video as others ave said. Just curious though, at 3:08 you show detachment of a water inlet...in an electric dryer? Again at 4:19, you show re-attachment of said "water inlet". I'm fairly certain that there is no water inlet in my machine.....
Good question! This particular model has a steam feature that requires water. Therefore, a water inlet valve is necessary. If your dryer does not have a steam feature, it won't have such a part. :)
Thanks
Replaced idler pulley and spring. Now if you stand on front of the dryer the drum is turning the wrong way (clockwise) runs for 10-15 seconds and shuts off ?
very good information. Thanks. I do want to take your VO announcer for a drink to brighten up his life a bit.
Thanks!
Thank you!
Jovan Brown You're welcome!
How comes the control panel come out so easy , usually is very hard for o take it out because of the clips and most of the times when I open one the clips are broken
Do you know what can cause a Samsung dryer to produce some weird rattling sound while in operation? The new house me and my family moved to has a Samsung washer and dryer on the first floor and the dryer will produce a weird rattling noise while in operation for some time, but nothing else strange happens.
hello, this is a very informative video, would these directions be the same for a gas dryer? Another question is how much would I need to dissemble to get to the valve to convert the samsung gas dryer to liquid propane?
Thanks for your input.
The gas and electric dryers come apart the same way. You will need to get the front panel off to get to the burner assembly. If your dryer is similar to the one in the video it most likely will come apart the same way.
***** thank you, anyway to get video instructions on how to convert the valve from a gas dryer to liquid propane?
Unfortunately we do not have a video on how to do that. Sorry!
I have a Samsung dryer, model DV337AEL/XAA. I need to replace the belt, but cannot figure out how to get the top/front control panel off. The top panel is off, and all 6 screws are off, but it's not coming off. Do I need to take off the front door first?
Placed an order for some parts from your store. Thanks.
LongRX7 Thank you for your business!
The door switch wire clip won't come out for me. I've pulled with all my might. Is there something I'm doing wrong ?
This is new to me, what is a water line doing in a dryer? Am I missing something, my Samsung dryer doesnt have one.
jeff meyers for steam feature
This dryer has a steam drying feature. The water line is drawn from the washer cold water line using Y hose connector.
My dryer no longer heats and continues to spin unless the door is open. The timer stays in the same time also. Do you have suggestions?
Hi Repair clinic
This really a fantastic video you have there. Thank you. We just bought the samsung DV80F5E5HGW dryer and trying to connect the drain hose with the 2 m long black hose that came with the dryer exactly like it says in the manual, but it won't work. The dryer stops drying and shows a red sign on the screen that he cannot get rid of the water. I connected then back again just like it was in the beginning to ensure then that the water would flow into the water-shelf but that now doesn't work either. Have you had this before. do I need to do sth else?
Hi Repair Clinic,
My Samsung drier wont start. I probably messed it up; the other day, I was emptying it and inorder to reach out to some clothes I was rotating the drum and by accident rotated it anticlockwise. This is when it caused a clank sound. The drier was turned off all through this. Subsequently, the drier would not start. Could you please suggest what could have gone wrong? Do you think the door switch was damaged? What is that 'clank' sound due to?
Your video guides me how to access each part in the drier, but I need to know which part is gone bad, so I can place order and replace.
I would sincerely appreciate your help.
Thanks. Raj
+Raj K it is hard to say, but testing the door switch is a good start. Also, some models have a broken belt switch so perhaps the belt came off the pulley.
The belt might have come off the idler pulley or the spring came off when you rotated the drum opposite way.